← Service bulletins

Technical Information · issue 25 of 2000

New Sales Designations for STIHL Chainsaws

IssueTI 25/2000

Historical fitment & changes

Source-reviewed model notes. An exact-model IPL link is unavailable where stated; no similar model is substituted. Availability statements belong to the bulletin’s date.

Service note · 039 / MS 390

039 / MS 390: new sales designation and round badge

TI25 explains MS naming and illustrates MS 390 as the former 039.

No exact-model IPL link: General naming guidance has no part-specific assembly binding; retained on its source bulletin rather than inventing a mechanical retrofit.

  • The enlarged chainsaw range prompted a naming-structure change. MS means Motor Saw (chain saw); the source says subsequent model designations retain three digits while dropping the initial 0. The illustrated specific example is MS 390, previously 039. Do not turn that prose into an automatic rename algorithm for every old model.
  • New round plates are clipped to the side of the fan housing instead of the top of the machine. FS, HS and TS are examples of other product-group prefixes, not chainsaw fitment assertions. No part number, mechanical interchange rule, serial cutoff or calendar introduction date is given.

Source: TI 25/2000, p. 1 — Entire one-page TI25/2000 including badge example.

No additional parts-table entry added.

Full text

Page 1 of 1

TI 25/2000 page 1
Text of page 1 — search, copy, screen readers
Technical Information

                                                                                             25.2000
New Sales Designations for STIHL Chain saws

The introduction of new models, versions and the
implementation of innovations means that the range
of chain saws is growing ever larger. We have
already reached the limits of the existing naming
structure. The model number structure of STIHL
chain saws will be brought into line with that of
STIHL power tools to ensure that there is plenty of
room for future expansion.

A two-letter prefix will indicate the product group as
with STIHL power tools, i.e. FS (brushcutters), HS        Round name plate in fan housing
(hedge trimmers), TS (cut-off machines) etc.: MS =        Example: MS 390 (previously 039)
Motor Saw (chain saw). The subsequent model
designation will continue to have three digits, but the
initial “0” has been dropped.

The round name plates introduced to coincide with
this change are now clipped to the side of the fan
housing instead of being on the top of the machine.

© 2000 Andreas Stihl AG & Co.                             Technical Documentation
  Waiblingen                                              D1/MTK-sc                                  6987

TI_25_2000_30_01.fm                                                                          english / USA

Most of these PDFs embed fonts with a shifted character map, so the text above was recovered rather than copied — read it as a faithful but imperfect transcription, and treat the page image above each block as the authority where the two disagree — the figures exist only there, because they are vector drawings that text extraction cannot keep.

Report a transcription error →