Technical Information · issue 12 of 2005
STIHL engine oil for mixture-lubricated engines; STIHL HP Super
IssueTI 12/2005
Full text
Page 1 of 2
STIH)
Technical Information 12.2005
STIHL engine oil for mixture-lubricated engines
STIHL HP Super - Easy identification of the mixture due to the
intensive green color of the oil
Type
- Classification: ISO L-EGD (worldwide),
STIHL HP Super engine oil is a high-performance JASO FD (Asian market):
partially synthetic engine oil for all applications in each case, the class with the highest
which use air-cooled mix lubricated engines. requirements with respect to exhaust smoke
STIHL HP Super replaces STIHL Low Smoke mix
oil.
Applications
Mixture ratio STIHL HP Super is intended primarily for use in
high-performance, air-cooled engines with mixture
1 : 50 (1 part STIHL engine oil to 50 parts of fuel) lubrication. These engines demand a high-quality
lubricant and are often operated for long periods at
full power.
Properties
STIHL HP Super combines excellent lubricating
Mixing with other oils
properties with a very low amount of exhaust-gas
smoke ("low fuming"). This distinguishes STIHL STIHL engine oil HP Super can be used alternately
HP Super from many other partially synthetic engine with other branded two-stroke engine oils which
oils. comply with the manufacturers' specifications.
In order to obtain the full performance of the
STIHL HP Super features:
product, STIHL engine oil HP Super should be used
- Excellent lubrication and protection against exclusively.
wear
- Suitable for engines with catalytic converters
- Reduced coking of the combustion chamber
and the exhaust system
- Very good self-mixing properties
- Reduced spark plug fouling and deposit build-up
- Contains fuel stabilizer
TI_12_2005_30_01_01.fm englisch / English USA
)m~ge 2 Technical Information 12.2005
Disposal
If necessary, the engine oil can be disposed of
together with old used oil from 4-stroke engines.
Chemical and physical parameters
Unit Typical data Test method
Color green
Density at 15 °C g/cm3 0.882 EN ISO 3838
Pour point °C < - 30 EN ISO 3016
Flame point °C > 55 EN ISO 2592
Kinematic viscosity at 40 °C mm2/s 39 EN ISO 3104
Kinematic viscosity at 100 °C mm2/s 6.4 EN ISO 3104
Durability years 4
Important notes on the preparation and storage Package sizes
of fuel-oil mixtures The oil is available in the following container sizes:
. Use mid-grade unleaded gasoline with a
minimum octane rating of 89 (R+M/2). If the Size Case part no.
octane rating of the mid-grade gasoline in your 2.6 oz.-48 per case 7010 871 0107
area is lower, use premium unleaded fuel. 5.2 oz.-48 per case 7010 871 0111
. Do not keep large stocks of mixture. This could 6.4 oz.-48 per case 7010 871 0114
result in demixing of the components, 12.8 oz.-24 per case 7010 871 0117
particularly in the case of fuels containing a high 1 gallon-6 per case 7010 871 0119
proportion of ethanol. This is particularly true at
5 gallon pail 7010 871 0120
low temperatures and if condensed water enters
55 gallon drum 7010 871 0121
the mixture – in such cases, the fuel will also
demix (the ethanol separates from the fuel).
Demixing which occurs in this manner is
Bottles are packaged in black colored containers.
irreversible, even if the temperature rises again.
The use of demixed fuel will cause the engine to
run poorly and may also result in damage to the
engine.
. Storage life of fuel and oil mixtures: a few
months (rule of thumb: about 3 months)
. Before use, thoroughly shake a mixture which
has stood for a long period
© ANDREAS STIHL AG & Co. KG, 2005 Technical Documentation
D1/MTK-ja
TI_12_2005_30_01_01.fm Page 2 of 2
Extracted from the manufacturer's 2012 service catalogue. Most of these PDFs embed fonts with a shifted character map, so the text above was recovered rather than copied — read it as a faithful but imperfect transcription, and treat the page image above each block as the authority where the two disagree — the figures exist only there, because they are vector drawings that text extraction cannot keep.