Stihl model · engine series 1147
MS 500i
EFI landmark; no choke
The production, market and rarity details above are specific to the MS 500i roster record. The chain, bar and displacement figures below are the published family fitment for engine series 1147; confirm the pitch, gauge and drive-link count stamped on your installed bar before ordering.
Family fitment specs
Chains & bars that fit the MS 500i
Pitch & gauge 3/8″ · .063″ · recommended bar 16–36″ · round file 7/32" (5.5 mm)
Chain & bar by length
| Bar | Drive links | Shop |
|---|---|---|
| 16″ | 60 DL | Chain → Bar → |
| 18″ | 66 DL | Chain → Bar → |
| 20″ | 72 DL | Chain → Bar → |
| 22″ | 76 DL | Chain → Bar → |
| 25″ | 84 DL | Chain → Bar → |
| 28″ | 91 DL | Chain → Bar → |
| 32″ | 105 DL | Chain → Bar → |
| 36″ | 114 DL | Chain → Bar → |
Drive-link counts from STIHL's saw-chain catalog. The chain is set by pitch + length (confirm the count stamped on your bar); the guide bar also depends on your saw's mount, so verify fitment before ordering.
Files, oil & sharpening
Suggested match: Oregon 72/73/75 EXL. Confirm the drive-link count for your exact bar length before ordering. These are equivalent aftermarket (Oregon) chains, not genuine STIHL chain — STIHL sells its own chain through its dealer network, and we're not affiliated with STIHL. New to pitch & cutter types? See the chain & cutter guide.
Some links earn us a commission. It never changes the specs or what we recommend.
Related models in series 1147
Data confidence
Chain, bar and displacement confidence applies to the shared MS 500i family data.
Something wrong or missing for the MS 500i? Report a correction →