← Contra · 070 · 090 · MS 720

Stihl 1106 · Section M · 12 of 17 · 20 parts

Handlebar

Fits 070.

Parts diagrams →

Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131314151617181923456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (20)

PosPart numberDescriptionQty
1 1106 790 1517 Handlebar with hose 1
2 not sold separately Handle hose 395 mm / 15 9/16'' 1
3 1106 791 5405 Support 1
4 1106 791 9000 Clamp 1
5 9042 216 1400 Pan head screw M6x40 1
6 9214 320 0900 Lock nut M6 Fitment / change note → 1
7 1106 791 6110 Collar screw 1
8 9220 260 0900 Hexagon nut M6 1
9 1106 791 6105 Collar screw 1
10 1106 790 7650 Support Fitment / change note → 1
11 9064 319 1380 Countersunk screw M6x35 Fitment / change note → 1
12 9214 320 0900 Lock nut M6 Fitment / change note → 1
13 1106 790 9910 Annular buffer 2
14 9079 319 0960 Flat head screw M5x12 4
15 9036 341 1020 Socket head screw M5x20 2
16 1106 792 9100 Hand guard 1
17 0000 951 2905 Oval head screw 2
18 1106 791 8200 Torsion spring 1
19 9062 319 1350 Countersunk screw M6x25 Fitment / change note → 1
Not numbered on the diagram — assemblies, kits and options
— 0000 791 2005 Handle hose Ø 23 mm x 5m / 1x197'' option 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · 070 / 090

070 / 090: mandatory new front-handle bracket for repairs

The new bracket uses an M6x35 countersunk screw and V M6 locknut.

X 29 906 077 — 070/090 front-handle bracket attachment only.

  • From X 29 906 077, the handlebar bracket is secured to the crankcase by an M6x35 countersunk screw and V M6 locknut. The screw and locknut will be included in the bracket supply. Figure 106TI003 shows these three components.
  • ALWAYS use the NEW version of the handlebar bracket for repairs. Old hex-head screw availability for older machines does not cancel this repair instruction. No torque, drilling instruction or 090 G applicability is printed. This cutoff is independent of the oil-line and ignition changes.
  • Historical TI 43/1994 guidance, not current stock, universal compatibility or physical verification. No hardware operation was performed.

Source: TI 43/1994, p. 3 — mandatory new front-handle bracket for repairs.

No additional parts-table entry added.

Service note · 070 / 090

070 / 090: front-handle bracket kit and supply-table ambiguity

New bracket is not separately available; retain the table’s contradictory inclusion range.

  • New bracket assembly 1106 790 7650 is listed as including items 1 TO4. Item 1 is old bracket 1106 791 7625, with a new-column symbol and remark 1: the NEW bracket is NOT AVAILABLE SEPARATELY. The TI gives no separate new bare-bracket number.
  • Old M6x25 hex-head screw 9062 319 1350 (key 2) has a dash in the new column and remains available for older machines (remark 2). New M6x35 countersunk screw 9064 319 1380 (key 3) and V M6 locknut 9214 320 0900 (key 4) each have MOQ 10. Bracket MOQ is blank.
  • The literal inclusion range 1–4 encompasses obsolete screw 2, whereas the prose and drawing identify the new countersunk screw and locknut. Preserve this SOURCE AMBIGUITY; do not promise both screws in the supplied kit or silently rewrite the range to 1, 3, 4. The locknut number is printed in the new column with no old number.
  • Footer: Waiblingen, November 10, 1994; D1/MTK-al. Prior TI 23.93 is a provenance reference, not an additional retrofit authorization.
  • Retained source conflict: this TI calls 9062 319 1350 an M6x25 HEX-HEAD screw; the linked SCS01-2012 070-M and 090/090 G-P IPLs call the SAME number a COUNTERSUNK screw M6x25. Neither label is silently corrected and the IPL description does not cancel the mandatory new-bracket repair rule. Verify physical head/form against the applicable assembly before treating the labels as equivalent.
  • Historical TI 43/1994 guidance, not current stock, universal compatibility or physical verification. No hardware operation was performed.

Source: TI 43/1994, p. 3 — front-handle bracket kit and supply-table ambiguity.

Part numbers (5)
  • 1106 790 7650 — New bracket assemblyincludes printed items 1–4; inclusion ambiguity · 070 / 090 only in the version/configuration described here
  • 1106 791 7625 — Original bare bracket; key 1new bare bracket not separate · 070 / 090 only in the version/configuration described here
  • 9062 319 1350 — Original M6x25 hex-head screw; key 2older-machine availability · 070 / 090 only in the version/configuration described here
  • 9064 319 1380 — New M6x35 countersunk screw; key 3MOQ 10 · 070 / 090 only in the version/configuration described here
  • 9214 320 0900 — V M6 locknut; key 4MOQ 10 · 070 / 090 only in the version/configuration described here

Wrong number or missing part for the 070? Report a correction →