← Contra · 070 · 090 · MS 720

Stihl 1106 · Section N · 13 of 19 · 25 parts

Wrap around handle

Fits 090, 090 G.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101111121213141516171819220212223243456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (25)

PosPart numberDescriptionQty
1 1106 790 3400 Wrap around handle 1
2 not sold separately Handle hose 390 mm / 15 3/8'' 1
3 not sold separately Handle hose 240 mm / 9 1/2'' 1
4 1106 791 7400 Strap 1
5 9321 630 0180 Spring washer 8 Fitment / change note → 1
6 9008 319 1780 Hexagon head screw M8x16 1
7 9008 319 1830 Hexagon head screw M8x25 Fitment / change note → 1
8 1106 791 9400 Tube clamp 1
9 1106 791 9500 Rubber bushing 1
10 0000 951 4110 Countersunk screw M6 1
11 1106 791 8600 Thrust washer 1
12 9214 320 0900 Lock nut M6 2
13 9048 216 1010 Pan head screw M5x18 1
14 1109 790 3400 Wrap around handle 1
15 not sold separately Handle hose 500 mm / 20'' 1
16 not sold separately Handle hose 240 mm / 9 1/2'' 1
17 1109 791 1900 Handlebar support 1
18 9048 216 1050 Pan head screw M5x25 no longer available from factory 1
19 9321 630 0120 Spring washer 5 1
20 9008 319 1010 Hexagon head screw M5x18 1
21 1109 791 9000 Clamp 1
22 9007 319 1400 Hexagon head screw M6x40 1
23 9334 630 0140 Spring washer 6 1
24 9042 216 1400 Pan head screw M6x40 1
Not numbered on the diagram — assemblies, kits and options
— 0000 791 2009 Handle hose Ø 19 mm x 5 m / 3/4x197'' option 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · 090

090: longer wrap-handle screw with spring washer

M8x25 plus B8 washer replaces M8x20; old screw remains for other models.

  • 090 wrap-around handle: M8x20 hex-head screw 9015 319 1800 replaced by M8x25 screw 9008 319 1830 PLUS spring washer B8, 9321 630 0180. The longer screw and washer are a paired change to improve mounting security.
  • Introduction in progress; NO serial cutoff given for this handle change. Old screw remains available for OTHER models, not a statement of unrestricted reuse on the modified090 joint. Current070 handle listing of the old screw is not a070 conversion mandate. No torque, threadlocker or other wrap-handle screws inferred.
  • Historical TI20/1996 only; stock statements are not present availability. Shared 090/090 G IPL sheets do not extend this note to 090 G. No hardware operation was performed.

Source: TI 20/1996, p. 1 · TI 20/1996, p. 3 — longer wrap-handle screw with spring washer.

Part numbers (3)
  • 9015 319 1800 — Hex-head screw M8x20Original; remains for other models · Original090 joint, not modified replacement
  • 9008 319 1830 — Hex-head screw M8x25New with spring washer · 090 wrap handle
  • 9321 630 0180 — Spring washer B8Required companion to new screw · 090 wrap handle

Wrong number or missing part for the 090, 090 G? Report a correction →