← 009 · 010 · 011 · 012

Stihl 1120 · Assembly · 1 of 19 · 28 parts

Air filter, Oil pump

Fits 009.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
11111213141516171819220212223253456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (28)

PosPart numberDescriptionQty
1 1120 121 7700 Guide piece 1
1 1120 121 7701 Guide piece CDN 1
2 1120 129 0506 Gasket 1
3 1120 120 4701 Diaphragm 1
4 9079 319 0670 Flat head screw M4x14 2
5 1120 129 0500 Gasket 1
6 1120 120 0605 Carburetor C1S-S1D 1
6 1120 120 0606 Carburetor WT-323 USA Fitment / change note → 1
6 1120 120 0601 Carburetor WT-563 CDN 1
7 9043 216 1101 Pan head screw M5x45 2
8 1120 120 1600 Air filter, fleece 1
9 1120 140 1005 Filter cover 1
10 1120 121 2906 Choke shutter 1
11 1120 121 2505 Shutter 1
12 0000 997 0706 Compression spring 1
13 1120 121 2700 Cap 1
14 9078 319 0680 1120 640 3001 Flat head screw M4x14 Oil pump 1 1
15 9516 003 1730 Ball Ø 4 mm 1
16 0000 997 0333 Compression spring 1
17 0000 988 5208 Connector 1
18 1120 640 1300 Filter 1
19 1120 647 7810 Washer 1
20 1120 649 1101 Gasket 1
21 1120 649 1105 Gasket 1
22 1120 640 3100 Plunger with diaphragm 1
23 0000 997 0610 Compression spring 1
24 1120 647 1200 Cover 1
25 9079 319 0670 1120 007 1062 Flat head screw M4x14 Set of gaskets 3 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · 009

009: optional 0.58 mm jet for WT-323

Optional high-altitude jets selected by stamped carburetor type; exact table associations and restrictions retained.

  • Use ONLY the type designation stamped on the carburetor body, not the saw model or carburetor part number alone. Each row below retains its exact printed suffix; later suffixes and MS successor models are not admitted by a shared number or sheet.
  • These are OPTIONAL smaller-bore high-altitude jets, not standard jets or unconditional replacements. For adjustable carburetors WITH a semi-fixed jet, TI29/1998 permits leaner adjustment down to H = 0 if necessary; the smaller-bore option is for very high altitude when that range is insufficient. This is not a universal H setting for other designs and no numeric altitude threshold is supplied.
  • Do NOT use the smaller-bore high-altitude jets at lower altitudes: an overly lean mixture can cause engine damage. Replacement is for trained personnel; press-fit positioning depends on the separate Carburetors handbook. No complete installation procedure, regulatory approval or physical interchange test is claimed. No hardware operation was performed.
  • WT 323: carburetor 1120 120 0606; optional fixed jet 1127 121 5602, bore 0.58 mm; source model 009. No USA-only asterisk is printed on this row.
  • Retained 009 air-filter/oil-pump assembly identifies this exact carburetor as WT-323 USA. That catalog label is distinct from the absence of a table asterisk here. Bound at the complete-carburetor row; no invented internal jet position.

Source: TI 29/1998, p. 1 · TI 29/1998, p. 2 — Page 1 complete guidance and page 2 WT 323 table rows.

Part numbers (2)
  • 1120 120 0606 — Carburetor WT 323Source type association · 009; stamped WT 323 only
  • 1127 121 5602 — High-altitude fixed jet, 0.58 mmOptional, not standard · WT 323; 009; high-altitude conditions only

Wrong number or missing part for the 009? Report a correction →