Stihl 1120 · Section M · 8 of 13 · 17 parts
Ignition system
Fits 010, 011.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (17)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1120 440 2202 | Ground wire | 1 |
| 2 | 0000 400 1306 | Ignition module Fitment / change note → | 1 |
| 3 | not sold separately | Ignition lead 360 mm not available as a separate item | 1 |
| 4 | 0000 989 1010 | Grommet | 1 |
| 5 | 9048 319 0710 | Pan head screw M4x20 | 1 |
| 6 | 9041 216 0300 | Pan head screw M3x4 | 1 |
| 7 | 9778 021 1040 | Tube clamp 5x9 | 1 |
| 8 | 9079 319 0650 | Flat head screw M4x10 | 1 |
| 9 | 1120 084 1401 | Cover | 1 |
| 10 | 0000 998 0604 | Torsion spring | 1 |
| 11 | 1128 405 1000 | Spark plug boot | 1 |
| 12 | 1120 036 8500 | Woodruff key 2x3.7 | 1 |
| 13 | 1120 400 1201 | Flywheel | 1 |
| 14 | 9291 021 0180 | Washer 8.4 | 1 |
| 15 | 9210 261 1140 | Hexagon nut M8x1 | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 0000 405 0600 NLA | Ignition lead 1 m not illustratedoption | 1 |
| — | 0000 930 2251 | Ignition lead 10 m not illustratedoption | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Historical fitment · 009 / 010 / 011 / 012
009 / 010 / 011 / 012: series 1120 replacement ignition assignment
0000 400 1306 and the listed flywheel pairing for series 1120; 360 mm ignition lead.
- Listed configuration: 0000 400 1306 with flywheel 1120 400 1206.
- Printed ignition-lead length: 360 mm (14 3/16 in). Preserve the printed metric and inch values; no rounding correction is inferred.
- TI01/1999 lists replacement combinations for the then-current machines, not every earlier configuration. Older machines are referred to Spare Parts for Previous Models in their own illustrated parts lists; no serial cutoff is supplied here.
- Use only the listed ignition-module/flywheel combinations. The source warns that incorrect combinations can cause excessive RPM or running in reverse; sharing a module number does not make all flywheels interchangeable.
- Universal replacement modules may differ from production modules in maker, shape and part number. The source describes installation/function compatibility within its assignments, not universal compatibility or a project hardware test.
- Some replacement modules require shortening the ignition lead and/or short-circuit wire and crimping a different short-circuit connector. The table gives ignition-lead lengths only; it supplies neither a short-circuit-wire length nor a connector part number. Do not infer that every row needs modification.
- Only the named models and printed series are covered. A shared IPL sheet does not extend this assignment to unnamed models or modern MS equivalents. This 1999 USA bulletin is historical guidance, not current availability.
Source: TI 1/1999, p. 1 · TI 1/1999, p. 2 — 1.1 general restrictions and 1.2.1 chainsaw assignments.
Part numbers (2)
- 0000 400 1306 — Replacement ignition moduleAssigned replacement · 009 / 010 / 011 / 012, series 1120, only with the listed flywheel branch
- 1120 400 1206 — Listed configuration flywheelRequired pairing · 009 / 010 / 011 / 012, series 1120; listed configuration only
Wrong number or missing part for the 010, 011? Report a correction →