← 024 · 026 · MS 260 · MS 240

Stihl 1121 · Section P · 15 of 16 · 10 parts

Tools, Extras

Fits 024.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
12345678
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (10)

PosPart numberDescriptionQty
1 1129 890 3401 Combination wrench Fitment / change note → 1
2 0812 370 1000 Screwdriver T27x120x70 1
3 0000 890 2300 NLA Screwdriver 1
4 0000 891 0801 NLA Tool roll 1
5 0000 890 2305 Screwdriver 1
6 0000 792 9129 Chain scabbard 1
7 0000 792 9132 Chain scabbard extension up to 63 cm option 1
8 1110 893 4000 Filing gauge option 1
Not numbered on the diagram — assemblies, kits and options
— 1121 890 1400 Tool kit Fitment / change note → 1
— 1121 007 1042 Mounting kit catalytic converter not illustratedoption 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Conditional replacement · 024 / 026

024 / 026: tool-kit wrench change only for serial prefix1

Tool kit 1121 890 1400 keeps its number while wrench 1129 890 3401 replaces 1119 890 3405, only on machines whose serial begins with 1.

Serial begins with digit 1 — Prefix-only applicability for the tool-kit change; in progress, no exact cutoff. Separate from US brake-spring boundary.

  • Section 4 standardizes the combination wrench within tool kit 1121 890 1400: previous 1119 890 3405 becomes 1129 890 3401. Both Previous and New kit columns retain 1121 890 1400. The kit number alone does not identify which wrench was supplied, and the table does not list every other kit component.
  • The note explicitly limits this change to machines whose serial numbers begin with digit 1. Introduction is in progress with no complete numerical cutoff. This prefix condition must not inherit the brake change serial 2 41 809 371 or be generalized to all production.
  • Remark 1 retains the old wrench for other models without naming them. No socket size, spark-plug compatibility or other-model fitment is invented from the replacement number. The exact 024/026 Tools, Extras sheets retain the kit and new wrench; no catalog rows are rewritten.
  • TI12/1999 historical guidance for the explicitly named 024/026 configurations only. No MS successor or general part-number-prefix compatibility is inferred. Factory supply statements are historical, not current availability. No physical interchange, oil-delivery measurement or brake test was performed.

Source: TI 12/1999, p. 1 · TI 12/1999, p. 2 · TI 12/1999, p. 3 — All three original USA pages: contents, sections1–4, four figures, all summaries, remarks and serial conditions.

Part numbers (3)
  • 1121 890 1400 — Tool kit; number unchangedWrench contents revised; other contents not enumerated · 024 and 026 with serial beginning 1 only; TI12/1999 section-specific conditions apply
  • 1119 890 3405 — Previous combination wrenchOld kit component; retained for unnamed other models · 024 and 026; prefix1 change only; TI12/1999 section-specific conditions apply
  • 1129 890 3401 — New combination wrenchRevised kit component; not a universal change · 024 and 026 with serial beginning 1 only; TI12/1999 section-specific conditions apply

Wrong number or missing part for the 024? Report a correction →