Stihl 1122 · Section J · 9 of 16 · 23 parts
Tank housing
Fits MS 650.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (23)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1122 350 0817 | Tank housing | 1 |
| 2 | 1122 353 9200 | Grommet | 1 |
| 3 | 0000 350 5802 | Tank vent | 1 |
| 4 | 1122 120 0104 | Carburetor housing | 1 |
| 5 | 1122 122 6602 | Collar screw | 2 |
| 6 | 9104 003 0650 | Self-tapping screw P4x10 | 6 |
| 7 | 1124 358 7700 | Hose | 1 |
| 8 | 0000 963 0808 | Bushing | 1 |
| 9 | 0000 967 3662 | Warning pictogram MS | 1 |
| 10 | 1122 141 2201 | Manifold | 1 |
| 11 | 1122 141 1805 | Sleeve | 1 |
| 12 | 9771 021 2620 | Hose clip Ø 36x5 | 1 |
| 13 | 1128 121 8600 | Washer | 1 |
| 14 | 1128 791 8400 | Ring | 1 |
| 15 | 1122 353 2600 | Elbow connector | 1 |
| 16 | not sold separately | Hose 3.1x5.7x52 mm, R5 not available as a separate item | 1 |
| 17 | 0000 350 3504 | Pickup body | 1 |
| 18 | 0000 967 3685 | Instruction label | 1 |
| 19 | 0000 350 0509 | Filler cap | 1 |
| 20 | 0000 359 1203 | Sealing ring | 1 |
| 21 | 0000 359 1230 | Sealing ring | 1 |
| 22 | 0000 350 0900 | Rope | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 0000 937 5004 | Hose 3.1x5.7 mm x 1 m, R5 not illustratedoption | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · MS 650
MS 650 fuel, ignition and chain-oil specifications
Tank capacities and plug gap are source-specific; no unstated fuel ratio is supplied.
- All-position diaphragm carburetor; fuel tank 1.74 US pt (0.825 l). The text says the same mixture as other STIHL two-stroke engines but supplies NO NUMERIC MIX RATIO; do not invent one from this page.
- Electronic ignition; suppressed NGK BPMR 7 A or Bosch WSR 6 F spark plug, electrode gap 0.020 in (0.5 mm). These are printed alternatives, not a newly tested cross-reference.
- Fully automatic, speed-controlled rotary-piston oil pump with adjustable flow; oil tank 0.76 US pt (0.360 l). No delivery rate, adjustment angle or pump revision is specified.
- Historical TI10/2005 MS 650 guidance only; the linked catalog sheets are navigation anchors, not proof that all later variants share these specifications. No physical interchange test was performed.
Source: TI 10/2005, p. 2 — MS 650 fuel, ignition and chain-oil specifications.
No additional parts-table entry added.
Wrong number or missing part for the MS 650? Report a correction →