Stihl 1122 · Section P · 15 of 16 · 25 parts
Shroud, Air filter
Fits MS 650.
Historical fitment & changes (5) — includes parts and conditions not shown on this drawing.
Parts (25)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1122 080 1609 | Shroud | 1 |
| 2 | 1122 967 1508 | Model plate MS 650 | 1 |
| 3 | 1121 084 7100 | Cap | 1 |
| 4 | 1124 084 8300 | Reflector foil | 1 |
| 5 | 0000 963 0808 | Bushing | 3 |
| 6 | 1122 084 7101 | Cap | 1 |
| 7 | 0000 967 1593 | Model plate Magnum | 1 |
| 8 | 1122 120 3402 | Filter base | 1 |
| 9 | 1122 120 2200 | Flange | 1 |
| 10 | 9121 319 0960 | Stud M5x12x9 | 1 |
| 11 | 9216 261 0700 | Hexagon nut M5 | 2 |
| 12 | 1122 121 6900 | Baffle | 1 |
| 13 | 1122 141 6300 | Air baffle | 1 |
| 14 | 0000 140 4402 | Air filter HD2 Fitment / change note → | 1 |
| 15 | 0000 141 0300 | Prefilter Fitment / change note → | 1 |
| 16 | 0000 120 1653 | Air filter, wire mesh Fitment / change note → option | 1 |
| 17 | 1122 140 1002 | Filter cover | 1 |
| 18 | 1122 141 4000 | Slide | 1 |
| 19 | 1124 140 9500 | Twist lock | 1 |
| 20 | 9022 341 0980 | Spline screw IS-M5x16 | 3 |
| 21 | 0000 140 4402 | Air filter HD2 Fitment / change note → option | 1 |
| 22 | 0000 141 0600 | Prefilter option | 1 |
| 23 | 0000 124 1000 | Supporting plate option | 1 |
| 24 | 0000 967 3692 | Warning pictogram Filler cap | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 0000 120 1655 | Air filter option | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · MS 650
MS 650 winter cover plate kit below 20°F
Snow protection is conditional on the stated winter conditions.
- Cover plate kit 1122 084 8207 helps prevent snow being sucked into the machine in winter conditions at temperatures BELOW 20°F (about −6.7°C by calculation). This is not a year-round installation recommendation or the 10°C threshold used in some other models.
- The source gives no fitting sequence or removal-temperature threshold. Do not substitute a different-model winter kit or infer that this plate alone prevents all carburetor icing.
- Historical TI10/2005 MS 650 guidance only; the linked catalog sheets are navigation anchors, not proof that all later variants share these specifications. No physical interchange test was performed.
Source: TI 10/2005, p. 3 — MS 650 winter cover plate kit below 20°F.
Part numbers (1)
- 1122 084 8207 — Cover plate kitWinter snow protection below 20°F · MS 650; see note restrictions
Service note · MS 440 / MS 460 / MS 650 / MS 660 / MS 880
MS 440 / MS 460 / MS 650 / MS 660 / MS 880: HD2 retrofit
HD2 replaces HD and is used WITHOUT the old prefilter.
- Exact cover scope: MS440/MS460 series1128, MS650/MS660 series1122 and MS880 series1124. Previous HD air filter 0000 120 1654 with prefilter 0000 141 0300 is replaced by HD2 0000 140 4402. HD2 has a black frame and pleated filter material; the illustration distinguishes old filter and wraparound prefilter from new HD2.
- HD2 can also be used on older machines in this named scope. Use HD2 WITHOUT a prefilter. Prefilter 0000 141 0300 remains available for the old HD filter, NOT as a requirement for HD2. Do not confuse this prefilter with required filter insert 0000 124 0800 on equipped systems.
- The old HD filter is no longer available from factory; summary row1 includes prefilter row2 and insert row3 in the old assembly. These inclusions must not be transferred to the new HD2 package. See separate insert note for system-dependent retention.
- Changeover is model-by-model over the next few months in this 2010 bulletin; summary says continuously. No universal changeover date or serial is supplied, and unnamed 044/046/064/066/088 models are not silently added.
- New material is described as oil/water repellent, sturdy, easy to clean, retaining integrity after numerous cleaning cycles and giving improved filtration especially in dust. These are historical vendor claims, not a quantified efficiency, service-life guarantee or locally reproduced test.
- Retained 2012 IPL sheets still list the prefilter beside HD2. That catalog coexistence is not permission to install the old prefilter on HD2: this TI explicitly says WITHOUT a prefilter. Canonical IPL rows remain unchanged; the historical service restriction is shown separately.
- Historical English TI47/2010; no numeric serial cutoff or current stock promise. No physical interchange test was performed.
Source: TI 47/2010, p. 1 · TI 47/2010, p. 3 — MS 440 / MS 460 / MS 650 / MS 660 / MS 880: HD2 retrofit.
Part numbers (3)
- 0000 120 1654 — HD air filterPrevious; discontinued from factory · TI47/2010 named models; preserve the stated filter-system conditions
- 0000 141 0300 — Prefilter for HD filterRetained for old HD; omit on HD2 · TI47/2010 named models; preserve the stated filter-system conditions
- 0000 140 4402 — HD2 air filterNew; older-machine use in named scope · TI47/2010 named models; preserve the stated filter-system conditions
Service note · MS 440 / MS 460 / MS 650 / MS 660 / MS 880
HD2 retrofit: retain the separately ordered filter insert
Systems already using 0000 124 0800 must continue to use it.
- Air filter systems equipped with filter insert 0000 124 0800 MUST still use that insert after switching to HD2. The source does not identify which individual model variants have it; do not require it universally or remove it from an equipped system.
- Order insert 0000 124 0800 separately: it is NOT supplied with HD2 0000 140 4402. The insert illustration depicts a separate piece, unlike the old wraparound prefilter on page1.
- Summary row3 retains the insert for older machines and refers to service notes; old HD summary row1 includes rows2/3. New HD2 row4 has no such inclusion. WITHOUT a prefilter means omit 0000 141 0300, not omit this required insert.
- Historical English TI47/2010; no numeric serial cutoff or current stock promise. No physical interchange test was performed.
Source: TI 47/2010, p. 1 · TI 47/2010, p. 2 · TI 47/2010, p. 3 — HD2 retrofit: retain the separately ordered filter insert.
Part numbers (2)
- 0000 124 0800 — Filter insertRetain on equipped systems; order separately · TI47/2010 named models; preserve the stated filter-system conditions
- 0000 140 4402 — HD2 air filterDoes not include the required separate insert · TI47/2010 named models; preserve the stated filter-system conditions
Service note · MS 440 / MS 460 / MS 650 / MS 660 / MS 880
HD2 air filter: clean from inside outwards
Use non-flammable cleaner for stubborn dirt; no pressure washer or extreme heat.
- Section1.2: knock out the air filter or blow clear with compressed air FROM INSIDE OUTWARDS. For stubborn dirt, wash in clean NON-FLAMMABLE liquid, e.g. warm soapy water, then rinse from inside to outside under a water jet.
- DO NOT use high-pressure cleaners. Dry ALL air filter parts; DO NOT expose to extreme heat. No numerical compressed-air pressure, water pressure, drying temperature or service interval is specified.
- This cleaning section belongs to the HD2 change; the adjacent wire-mesh accessory heading is a separate section. Do not silently generalize these instructions to every filter material.
- Historical English TI47/2010; no numeric serial cutoff or current stock promise. No physical interchange test was performed.
Source: TI 47/2010, p. 2 — HD2 air filter: clean from inside outwards.
No additional parts-table entry added.
Service note · MS 440 / MS 460 / MS 650 / MS 660 / MS 880
Wire-mesh filter: green housing remains a special accessory
The HD-to-HD2 replacement does not delete the wire-mesh option.
- Section2 and summary row5 retain wire-mesh air filter 0000 120 1653 as a SPECIAL ACCESSORY. The source identifies a green filter housing, distinct from the black HD2 frame.
- No replacement of this wire-mesh filter by HD2 is stated, and no environmental-use recommendation or comparative filtering efficiency is supplied for it. Historical continued availability is not a present-stock promise.
- Historical English TI47/2010; no numeric serial cutoff or current stock promise. No physical interchange test was performed.
Source: TI 47/2010, p. 2 · TI 47/2010, p. 3 — Wire-mesh filter: green housing remains a special accessory.
Part numbers (1)
- 0000 120 1653 — Wire-mesh air filter, green housingRetained special accessory · TI47/2010 named models; preserve the stated filter-system conditions
Wrong number or missing part for the MS 650? Report a correction →