← 084 · 088 · MS 780/880/881

Stihl 1124 · Section E · 5 of 15 · 16 parts

Clutch

Fits 084.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Applies from serial 25 673 243 — check the number stamped on your machine. Change documented in Technical Information 22/1992 .

Position —

Go to table row → Where else is this used →
110101011121323456788899
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (16)

PosPart numberDescriptionQty
1 1124 640 7500 Spur gear 1
2 1124 642 0900 Spring 2
3 1124 642 1400 Cover plate 1
4 9486 648 0080 Cup spring 8 2
5 9100 021 0810 Self-tapping screw 4.2x9.5 2
6 1124 640 2001 Chain sprocket 0.404" 7T 1
7 0000 642 1207 Rim sprocket 0.404" 7T 1
8 not sold separately Clutch drum not available as a separate item 1
9 0000 958 1236 Washer 1
10 9460 624 1001 E-clip 10x1.5 1
11 0000 642 1216 Rim sprocket 3/8" 8T 1
12 0000 642 1217 Rim sprocket 0.404" 8T 1
13 0000 958 1231 Washer 1
Not numbered on the diagram — assemblies, kits and options
— 1124 007 1000 Rim sprocket kit 0.404" 7T 1
— 1124 007 1001 Rim sprocket kit 3/8" 8T 1
— 1124 007 1027 Rim sprocket kit 0.404" 8Z 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · 084

084 replacement clutch: 05 marking and separate spare-retention rules

The complete old clutch remains a spare; three old internal components last only while stocks remain.

  • Section 3 is 084 ONLY: complete clutch 1124 160 2005 will replace 1124 160 2000 as the supplied replacement. Prose identifies the new clutch by marking "05"; the magnified original drawing shows "/05" after a boxed mark. Preserve both forms without turning the mark into a serial, date code or a new part number. This clutch was already used on 088 from the start of production.
  • Table item 1, complete clutch, explicitly includes ITEMS 2 THROUGH 5. Carrier 1124 162 3200 becomes 1124 162 3205; clutch shoe 1124 162 0800 becomes 1124 162 0805; clutch spring 0000 997 5814 becomes 0000 997 5818. Retainer 1124 162 3000 remains UNCHANGED in both columns. No separate component quantities or permission to mix old/new carrier, shoe and spring designs is stated.
  • Introduction is IN PROGRESS, with NO serial cutoff. Remark 1 retains original COMPLETE CLUTCH 1124 160 2000 as a spare for older machines. Remark 2 limits original carrier 3200, shoe 0800 and spring 5814 to EXISTING STOCKS ONLY. The unchanged retainer has NO availability remark. Do not collapse these distinct supply rules or transfer the piston/carburator deletion rule to the complete old clutch.
  • The last-TI references 18/1995 for 084 and 35/1996 for 088 are bibliographic history, not missing delegated instructions. This bulletin supplies no clutch torque, engagement speed or dismantling procedure.
  • Historical TI17/1997 evidence for the named model and section only. No serial cutoff is supplied. Factory availability describes the bulletin date, not present stock. No MS880/MS881 scope, reciprocal component interchange or physical verification inferred. No hardware operation was performed.

Source: TI 17/1997, p. 2 · TI 17/1997, p. 3 — 084 replacement clutch: 05 marking and separate spare-retention rules.

Part numbers (9)
  • 1124 160 2000 — Original complete clutchRetained spare for older machines · 084; 084 replacement clutch: 05 marking and separate spare-retention rules
  • 1124 160 2005 — Replacement complete clutch, 05 markingIncludes items 2–5 · 084; 084 replacement clutch: 05 marking and separate spare-retention rules
  • 1124 162 3200 — Original carrierExisting stocks only · 084; 084 replacement clutch: 05 marking and separate spare-retention rules
  • 1124 162 3205 — New carrierNew clutch component · 084; 084 replacement clutch: 05 marking and separate spare-retention rules
  • 1124 162 3000 — RetainerUnchanged · 084; 084 replacement clutch: 05 marking and separate spare-retention rules
  • 1124 162 0800 — Original clutch shoeExisting stocks only · 084; 084 replacement clutch: 05 marking and separate spare-retention rules
  • 1124 162 0805 — New clutch shoeNew clutch component · 084; 084 replacement clutch: 05 marking and separate spare-retention rules
  • 0000 997 5814 — Original clutch springExisting stocks only · 084; 084 replacement clutch: 05 marking and separate spare-retention rules
  • 0000 997 5818 — New clutch springNew clutch component · 084; 084 replacement clutch: 05 marking and separate spare-retention rules

Wrong number or missing part for the 084? Report a correction →