Stihl 1124 · Section D · 4 of 14 · 26 parts
Clutch
Fits 088.
Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.
Parts (26)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1124 162 3205 | Carrier | 1 |
| 2 | 1124 162 0805 | Clutch shoe | 3 |
| 3 | 1124 162 3000 | Retainer | 3 |
| 4 | 0000 997 5818 | Tension spring | 3 |
| 5 | 1124 162 8900 | Washer | 1 |
| 6 | 9512 933 3170 | Needle cage 12x17x13 | 1 |
| 7 | 1124 640 2005 | Chain sprocket 0.404" 7T Fitment / change note → option | 1 |
| 8 | 1124 640 2004 | Chain sprocket 3/8" 8T Fitment / change note → option | 1 |
| 9 | 0000 958 1236 | Washer | 1 |
| 10 | 9460 624 1001 | E-clip 10x1.5 | 1 |
| 11 | 0000 642 1207 | Rim sprocket 0.404" 7T | 1 |
| 12 | not sold separately | Clutch drum not available as a separate item | 1 |
| 13 | 0000 642 1216 | Rim sprocket 3/8" 8T option | 1 |
| 14 | 1124 007 1008 | Spur gear / chain adjusting screw kit | 1 |
| 15 | 9646 945 0490 | O-ring 7x1.5 | 1 |
| 16 | 1124 664 4400 | Brake washer | 1 |
| 17 | 1124 640 1900 | Tensioner slide | 1 |
| 18 | 1124 664 1400 | Thrust pad | 1 |
| 19 | 1124 664 2210 | Cover plate | 1 |
| 20 | 9041 216 0630 | Pan head screw M4x8 | 2 |
| 21 | 1124 664 4500 | Support | 1 |
| 22 | 1124 664 1001 | Inner side plate | 1 |
| 23 | 9022 313 0630 | Spline screw IS-M4x8 | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 1124 160 2005 | Clutch Fitment / change note → | 1 |
| — | 1124 007 1024 | Rim sprocket kit 0.404" 7T Fitment / change note → | 1 |
| — | 1124 007 1025 | Rim sprocket kit 3/8" 8T Fitment / change note → option | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Historical fitment · 088
088: cutting attachments and sprocket options
The bulletin states 084 cutting-attachment compatibility and lists distinct rim kits and spur sprockets.
- The 088 can be equipped with the same cutting attachments as 084 according to section 1.10. This is a historical cutting-attachment statement, not unrestricted cross-model engine or clutch interchange.
- The listed rim sprocket kits are .404-inch 8-tooth 1124 007 1027, .404-inch 7-tooth 1124 007 1024, and 3/8-inch 8-tooth 1124 007 1025. The separate spur sprockets are 3/8-inch 8-tooth 1124 640 2004 and.404-inch 7-tooth 1124 640 2005.
- Chain scabbard extension 0000 792 9133 is listed separately. No kit contents, bar lengths, chain drive-link counts, combinations mixing pitches, or present availability are inferred.
Source: TI 35/1996, p. 6 — Sections1.10 and3 complete accessories table.
Part numbers (6)
- 1124 007 1027 — .404-inch 8-tooth rim sprocket kitAccessory · 088; rim kit
- 1124 007 1024 — .404-inch 7-tooth rim sprocket kitAccessory · 088; rim kit
- 1124 007 1025 — 3/8-inch 8-tooth rim sprocket kitAccessory · 088; rim kit
- 1124 640 2004 — 3/8-inch 8-tooth spur sprocketAccessory · 088; spur sprocket
- 1124 640 2005 — .404-inch 7-tooth spur sprocketAccessory · 088; spur sprocket
- 0000 792 9133 — Chain scabbard extensionAccessory · 088; extension
Service note · 088
088 from production start: piston 2007 and clutch 2005
The 084 service replacements were already fitted to the 088 from the beginning.
- TI17 explicitly says piston 1124 030 2007 and clutch 1124 160 2005 have been installed in model 088 since the START OF PRODUCTION. These are existing 088 production facts, not a 1997 replacement or a new 088 cutoff. No production-start date is given.
- The piston has a reinforced pin boss, optimized lubricating recesses and SIX CROSSES in two columns of three. The clutch is identified as "05" in prose and "/05" after a boxed mark in the original drawing. No dimensional or test result is inferred from either identification illustration.
- The 084-only sections announce these assemblies as 084 replacements. Do NOT transfer their old-piston deletion or old-clutch/component stock rules to an unstated earlier 088 design. The separate carburetor section is the 088 change in this bulletin.
- Historical TI17/1997 evidence for the named model and section only. No serial cutoff is supplied. Factory availability describes the bulletin date, not present stock. No MS880/MS881 scope, reciprocal component interchange or physical verification inferred. No hardware operation was performed.
Source: TI 17/1997, p. 1 · TI 17/1997, p. 2 — 088 from production start: piston 2007 and clutch 2005.
Part numbers (2)
- 1124 030 2007 — Piston with reinforced boss and six crosses088 from start of production · 088; 088 from production start: piston 2007 and clutch 2005
- 1124 160 2005 — Clutch with 05 identification088 from start of production · 088; 088 from production start: piston 2007 and clutch 2005
Wrong number or missing part for the 088? Report a correction →