← 017/018 · MS 170/180

Stihl 1130 · Section F · 6 of 10 · 17 parts

Quick chain tensioner

Fits 018.

Parts diagrams →

Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
11011121314151623456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (17)

PosPart numberDescriptionQty
1 1123 640 1700 NLA Chain sprocket cover 1
2 1123 648 3800 NLA Cover plate 1
3 1123 648 2202 NLA Adjusting wheel 1
4 9104 003 8600 NLA Self-tapping screw P3x10 1
5 1121 660 1000 Wing nut 1
6 not sold separately Torsion spring not available as a separate item 1
7 not sold separately Cap not available as a separate item 1
8 not sold separately Handle not available as a separate item 1
9 not sold separately Cylindrical pin 3m6x26 not available as a separate item 2
10 1123 664 2402 NLA Collar screw 1
11 1123 660 3001 NLA Tensioning gear 1
12 9041 319 0600 NLA Pan head screw M4x5 1
13 1123 664 0501 Bumper spike 1
14 9075 478 4115 Pan head self-tapping screw IS-D5x16 2
15 1123 021 2800 Insert 1
16 0812 370 1000 Screwdriver T27x120x70 1
Not numbered on the diagram — assemblies, kits and options
— 1123 007 1008 NLA Quick tensioner parts Fitment / change note → option 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · 018 / 018 C

018 and 018 C: launch equipment and engine design

The C version combines quick chain tensioning, ElastoStart and a decompression valve; those are not standard-version promises.

  • The 018 is described as a development of the 017, with the same applications. It is offered as standard 018 and 018 C; the latter has quick chain tensioner, ElastoStart and decompression valve. The cover photograph specifically shows an 018 C with Picco Micro Mini cutting attachment. Neither the photograph nor the shared family establishes those convenience features on every standard 018.
  • The descriptions cover only differences from the 017. The single-cylinder two-stroke engine has a machined crankshaft, described as optimizing the big-end bearing and high-speed characteristics, a four-port cylinder and a two-ring piston. The cylinder drawing 140TI002 KN illustrates the four-port mixture-flow arrangement; it supplies no port dimensions or machining instructions.
  • Improved mixture control, cleaner combustion and lower emissions are the bulletin’s design claims, not independent measurements. No crankshaft, cylinder or piston part numbers or 017-to-018 conversion instructions are supplied here.
  • Historical TI 42/1998, series 1130. This is the launch-era 018/018 C evidence, not a specification for MS 180 or every later 018 carburetor/configuration. No serial threshold, current stock or physically tested interchange is established. No hardware operation was performed.

Source: TI 42/1998, p. 1 · TI 42/1998, p. 2 — Complete introduction,cover photograph and section1 engine/cylinder/piston;140TI002 KN.

No additional parts-table entry added.

Historical fitment · 018 / 018 C

018: launch repair, filing and quick-tensioner kits

Launch accessory roles remain distinct. Later catalog kit lists use different carburetor callouts for the same four parts; they do not establish the 1998 kit contents.

  • Section3 lists STIHL repair kit 1130 900 5000, filing gauge 0000 893 4000 and quick chain tensioner kit 1123 007 1008 as special accessories for users. Section4 separately lists carburetor parts kit 1130 007 1061 as a service accessory.
  • The quick-tensioner kit listing is not an exploded kit bill of materials or a complete retrofit procedure. The standard/C launch distinction remains explicit. Do not transfer the separate 026 C crankcase/no-kit restriction from TI39 to this 018 kit, or transfer this kit approval to 026.
  • The TI does not identify the carburetor by maker/type, give individual kit contents or explain compatibility with later C1Q variants. The later 018 carburetor sheets describe their own configurations; their titles do not identify the 1998 BIS carburetor or prove this kit applies to every row.
  • Later-source comparison only — SCS 01-2012 (USA), original PL000002.dat: quick-tensioner kit 1123 007 1008 carries the explicit callout list 1–16 on document 80. Carburetor kit 1130 007 1061 carries 10, 11, 15, 16 on C1Q-S43B document 84 (49.2000), but 8, 9, 14, 15 on C1Q-S57C/C1Q-S57A document 8199. Callout numbers are local to each sheet, not interchangeable part numbers.
  • The two carburetor inclusion lists resolve to the same four later-catalog part numbers: gasket 1130 129 0901, metering diaphragm 1130 121 4700, pump diaphragm 1130 121 4800 and gasket 1130 129 0900. The native application guide independently confirms the including-item field using its exact 009 crankcase table and legend. This is later-catalog kit evidence, not proof of 1998 contents or universal C1Q compatibility.
  • The native legend uses a white-square symbol for including item No.; tilde-prefixed row identities are not that symbol. On the quick-tensioner sheet, included positions 6–9 have no separate orderable number and are marked (D), not available as separate item. The 1–16 list belongs to this exact 2012 sheet and is not a complete retrofit procedure. Historical availability code (ND) is retained in the evidence without an assumed meaning. The remaining historical dependencies are dispositioned below; kit contents are not reconstructed from similar part numbers.
  • The later 2000-06 STIHL 017/018 workshop manual, section 2.5 (PDF 5, printed 4), repeats user repair kit 1130 900 5000 but supplies no contents. Its service-accessory row prints carburetor parts kit 1130 007 1060, whereas the 018 launch TI prints 1130 007 1061. Preserve this source conflict: no supersession, typo correction or universal carburetor compatibility is established.
  • Filing gauge 0000 893 4000 is for 3/8-inch PMN at 0.45 mm (0.018 inch), explicitly confirmed by later TI 31/2007 page 3. That bulletin says sharpening set 5605 007 1026 was dropped from the range while the PMN gauge would remain available for five years as a spare part. This is a historical supply statement, not proof of current stock or an exact discontinuation date.
  • TI 31/2007 distinguishes the new 3/8-inch PMMC3 setting of 0.65 mm (0.025 inch) from PMN. Its harmonized sharpening set 5605 007 1027 is for 3/8-inch PM, PMC3, PMMC3 and 1/4-inch RM: round file 5605 772 4006 (5/32 inch / 4.0 mm), holder 5605 750 4327, gauge 1110 893 4000 (0.65 mm / 0.025 inch), and flat file 0814 252 3356. This does not substitute the 0.65-mm gauge for the launch PMN gauge. The PMMC3 depth gauge and marked upper humped drive link are lowered together; its service marking and PM/PMC3 sharpening method are chain-specific, not blanket instructions for PMN.
  • The 2012-01 Identification List gives filing gauge 0000 893 4000 AT 12 (PDF 38 / printed 19) and repair kit 1130 900 5000 AT 06 (PDF 215 / printed 196), with no structure symbol or successor number on either row. Its German legend defines AT as the last year of factory supply: 2012 and 2006 respectively, as stated by this historical register. Neither row proves current dealer stock, kit contents or a replacement part. The gauge entry is consistent with the five-year statement in TI 31/2007; no exact day or month is inferred.
  • The exact 1998 018 owner manual and the contents/instructions for user repair kit 1130 900 5000 remain unavailable in the checked collection. A verified inventory and exact-number text search covered 808 retained PDFs; original 2012 part and BOM tables contain neither user-accessory number. The repair-kit matches supply listings and an AT 06 withdrawal-register row, not a bill of materials. Missing later catalog rows do not revoke the TI listing. These are bounded source gaps, not proof of global absence or permission to substitute a different manual. Exact 1998 quick-tensioner/carburetor kit contents remain unestablished despite the separately reviewed 2012 lists.
  • Historical TI 42/1998, series 1130. This is the launch-era 018/018 C evidence, not a specification for MS 180 or every later 018 carburetor/configuration. No serial threshold, current stock or physically tested interchange is established. No hardware operation was performed.

TI dependency: TI 42/1998, p. 4 — Complete sections3 and4.

Referenced bulletin evidence: TI 31/2007, p. 3 — Complete page 3 sections 2–2.2: chain-specific sharpening, sets, gauge depth and historical availability; supplementary dependency review only.

Later manual evidence: STIHL 017, 018 workshop manual (2000-06), section 2.5 special accessories (printed 4); kit number conflict preserved, PDF pages 5 · STIHL Identification List (2012-01), section Cover, German AT/structure legend, gauge and repair-kit rows (printed 19 and 196), PDF pages 1, 2, 38, 215

Part numbers (4)
  • 1130 900 5000 — STIHL repair kitUser accessory · 018/018 C; TI 42/1998 only
  • 0000 893 4000 — Filing gaugeUser accessory · 018/018 C; TI 42/1998 only
  • 1123 007 1008 — Quick chain tensioner kitUser accessory · 018/018 C; TI 42/1998 only
  • 1130 007 1061 — Carburetor parts kitService accessory · 018/018 C; TI 42/1998 only

Wrong number or missing part for the 018? Report a correction →