Stihl 1130 · Section H · 8 of 10 · 33 parts
Carburetor C1Q-S57C, C1Q-S57A
Fits 018.
Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.
Parts (33)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1130 121 5401 | Valve jet | 1 |
| 2 | 1130 121 5604 | Fixed jet 0.45 | 1 |
| 3 | 4116 121 5100 | Inlet needle | 1 |
| 4 | 1130 122 3001 | Spring | 1 |
| 5 | 1125 121 5000 | Inlet control lever | 1 |
| 6 | 1120 121 9200 | Spindle | 1 |
| 7 | 1120 122 6600 | Collar screw | 1 |
| 8 | 1130 129 0901 | Gasket | 1 |
| 9 | 1130 121 4700 | Metering diaphragm | 1 |
| 10 | 1130 121 0800 | End cover | 1 |
| 11 | 9646 945 0490 | O-ring 7x1.5 | 1 |
| 12 | 1120 122 6601 | Collar screw | 4 |
| 13 | 1123 121 7800 | Strainer | 1 |
| 14 | 1130 121 4800 | Pump diaphragm | 1 |
| 15 | 1130 129 0900 | Gasket | 1 |
| 16 | 1130 121 0801 | End cover | 1 |
| 17 | 1120 122 7800 | Oval head screw | 1 |
| 18 | 1123 122 3000 | Spring | 1 |
| 19 | 1130 120 7101 | Throttle shaft with lever | 1 |
| 20 | 1130 121 3302 | Throttle shutter | 1 |
| 21 | 1120 122 7400 | Round head screw | 1 |
| 22 | 1125 122 9001 | E-clip | 1 |
| 23 | 1130 122 6301 | Idle speed adjustment screw | 1 |
| 24 | 1130 122 6300 | Idle speed adjustment screw | 1 |
| 25 | 1123 122 3203 | Torsion spring | 1 |
| 26 | 1123 120 7200 | Choke shaft with lever | 1 |
| 27 | 1125 122 7403 | Round head screw | 1 |
| 28 | 1125 122 9002 | E-clip | 1 |
| 29 | 1132 121 2901 | Choke shutter | 1 |
| 30 | 4137 121 5601 | Fixed jet 0.42 option | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 1130 120 0603 | Carburetor C1Q-S57C | 1 |
| — | not sold separately | Carburetor C1Q-S57A no longer available from factory | 1 |
| — | 1130 007 1061 | Set of carburetor parts Fitment / change note → | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Historical fitment · 018 / 018 C
018: launch repair, filing and quick-tensioner kits
Launch accessory roles remain distinct. Later catalog kit lists use different carburetor callouts for the same four parts; they do not establish the 1998 kit contents.
- Section3 lists STIHL repair kit 1130 900 5000, filing gauge 0000 893 4000 and quick chain tensioner kit 1123 007 1008 as special accessories for users. Section4 separately lists carburetor parts kit 1130 007 1061 as a service accessory.
- The quick-tensioner kit listing is not an exploded kit bill of materials or a complete retrofit procedure. The standard/C launch distinction remains explicit. Do not transfer the separate 026 C crankcase/no-kit restriction from TI39 to this 018 kit, or transfer this kit approval to 026.
- The TI does not identify the carburetor by maker/type, give individual kit contents or explain compatibility with later C1Q variants. The later 018 carburetor sheets describe their own configurations; their titles do not identify the 1998 BIS carburetor or prove this kit applies to every row.
- Later-source comparison only — SCS 01-2012 (USA), original PL000002.dat: quick-tensioner kit 1123 007 1008 carries the explicit callout list 1–16 on document 80. Carburetor kit 1130 007 1061 carries 10, 11, 15, 16 on C1Q-S43B document 84 (49.2000), but 8, 9, 14, 15 on C1Q-S57C/C1Q-S57A document 8199. Callout numbers are local to each sheet, not interchangeable part numbers.
- The two carburetor inclusion lists resolve to the same four later-catalog part numbers: gasket 1130 129 0901, metering diaphragm 1130 121 4700, pump diaphragm 1130 121 4800 and gasket 1130 129 0900. The native application guide independently confirms the including-item field using its exact 009 crankcase table and legend. This is later-catalog kit evidence, not proof of 1998 contents or universal C1Q compatibility.
- The native legend uses a white-square symbol for including item No.; tilde-prefixed row identities are not that symbol. On the quick-tensioner sheet, included positions 6–9 have no separate orderable number and are marked (D), not available as separate item. The 1–16 list belongs to this exact 2012 sheet and is not a complete retrofit procedure. Historical availability code (ND) is retained in the evidence without an assumed meaning. The remaining historical dependencies are dispositioned below; kit contents are not reconstructed from similar part numbers.
- The later 2000-06 STIHL 017/018 workshop manual, section 2.5 (PDF 5, printed 4), repeats user repair kit 1130 900 5000 but supplies no contents. Its service-accessory row prints carburetor parts kit 1130 007 1060, whereas the 018 launch TI prints 1130 007 1061. Preserve this source conflict: no supersession, typo correction or universal carburetor compatibility is established.
- Filing gauge 0000 893 4000 is for 3/8-inch PMN at 0.45 mm (0.018 inch), explicitly confirmed by later TI 31/2007 page 3. That bulletin says sharpening set 5605 007 1026 was dropped from the range while the PMN gauge would remain available for five years as a spare part. This is a historical supply statement, not proof of current stock or an exact discontinuation date.
- TI 31/2007 distinguishes the new 3/8-inch PMMC3 setting of 0.65 mm (0.025 inch) from PMN. Its harmonized sharpening set 5605 007 1027 is for 3/8-inch PM, PMC3, PMMC3 and 1/4-inch RM: round file 5605 772 4006 (5/32 inch / 4.0 mm), holder 5605 750 4327, gauge 1110 893 4000 (0.65 mm / 0.025 inch), and flat file 0814 252 3356. This does not substitute the 0.65-mm gauge for the launch PMN gauge. The PMMC3 depth gauge and marked upper humped drive link are lowered together; its service marking and PM/PMC3 sharpening method are chain-specific, not blanket instructions for PMN.
- The 2012-01 Identification List gives filing gauge 0000 893 4000 AT 12 (PDF 38 / printed 19) and repair kit 1130 900 5000 AT 06 (PDF 215 / printed 196), with no structure symbol or successor number on either row. Its German legend defines AT as the last year of factory supply: 2012 and 2006 respectively, as stated by this historical register. Neither row proves current dealer stock, kit contents or a replacement part. The gauge entry is consistent with the five-year statement in TI 31/2007; no exact day or month is inferred.
- The exact 1998 018 owner manual and the contents/instructions for user repair kit 1130 900 5000 remain unavailable in the checked collection. A verified inventory and exact-number text search covered 808 retained PDFs; original 2012 part and BOM tables contain neither user-accessory number. The repair-kit matches supply listings and an AT 06 withdrawal-register row, not a bill of materials. Missing later catalog rows do not revoke the TI listing. These are bounded source gaps, not proof of global absence or permission to substitute a different manual. Exact 1998 quick-tensioner/carburetor kit contents remain unestablished despite the separately reviewed 2012 lists.
- Historical TI 42/1998, series 1130. This is the launch-era 018/018 C evidence, not a specification for MS 180 or every later 018 carburetor/configuration. No serial threshold, current stock or physically tested interchange is established. No hardware operation was performed.
TI dependency: TI 42/1998, p. 4 — Complete sections3 and4.
Referenced bulletin evidence: TI 31/2007, p. 3 — Complete page 3 sections 2–2.2: chain-specific sharpening, sets, gauge depth and historical availability; supplementary dependency review only.
Later manual evidence: STIHL 017, 018 workshop manual (2000-06), section 2.5 special accessories (printed 4); kit number conflict preserved, PDF pages 5 · STIHL Identification List (2012-01), section Cover, German AT/structure legend, gauge and repair-kit rows (printed 19 and 196), PDF pages 1, 2, 38, 215
Part numbers (4)
- 1130 900 5000 — STIHL repair kitUser accessory · 018/018 C; TI 42/1998 only
- 0000 893 4000 — Filing gaugeUser accessory · 018/018 C; TI 42/1998 only
- 1123 007 1008 — Quick chain tensioner kitUser accessory · 018/018 C; TI 42/1998 only
- 1130 007 1061 — Carburetor parts kitService accessory · 018/018 C; TI 42/1998 only
Service note · 018 / 018 C
018 BIS carburetor: left-hand LD screw and two-turn baseline
Lightly seat LD counterclockwise, then open two full turns clockwise; the chain must remain stopped at idle.
- The all-position diaphragm carburetor has an integral fuel pump and balanced idle system (BIS). Figure140TI001 KN locates LD, the only idle-rpm adjusting screw. There is neither an H high-speed screw nor an L low-speed screw; the fuel-air mixture is factory set. The TI describes BIS as providing an optimum idle mixture across idle speeds, not a user H/L mixture adjustment.
- Before adjustment, check the air filter and replace if necessary; check the spark-arresting screen and clean or replace as necessary. LD has a LEFT-HAND thread: carefully and lightly seat it COUNTERCLOCKWISE, then open it TWO FULL TURNS CLOCKWISE (standard LD=2). Do not force the seat or use a conventional right-hand seating direction.
- The historical procedure then starts and warms the engine and adjusts LD with the requirement that the CHAIN MUST NOT ROTATE at idle. If idle speed is too low, slowly turn LD clockwise until the chain begins rotating, then back off one half turn. If the chain already rotates at idle, turn LD slowly counterclockwise until it stops, then about another one half turn in the same direction. Those are separate starting conditions; the end state is always a stopped chain.
- Running the unit during repairs or maintenance requires all local/national safety regulations and the owner-manual precautions, explicitly required by section5. This source-bound description is not a substitute for that complete operating/safety procedure. The exact 1998 018 owner manual is a documented gap in the checked collection; no live adjustment was performed.
- The later C1Q-S57C/S57A and C1Q-S43B sheets locate the model’s carburetor area, not proof that those later carburetor identities share this exact1998 LD procedure. Identify the installed carburetor; the TI gives no maker/type or retrofit approval.
- Historical TI 42/1998, series 1130. This is the launch-era 018/018 C evidence, not a specification for MS 180 or every later 018 carburetor/configuration. No serial threshold, current stock or physically tested interchange is established. No hardware operation was performed.
Source: TI 42/1998, p. 2 · TI 42/1998, p. 3 · TI 42/1998, p. 4 — Section1 carburetor and140TI001 KN;complete2.2 and5/5.1.
No additional parts-table entry added.
Wrong number or missing part for the 018? Report a correction →