← MS 341 · MS 361

Stihl 1135 · Section C · 3 of 15 · 32 parts

Oil pump, Clutch

Fits MS 361, MS 361 C.

Parts diagrams →

Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131415161718192220222324252627283456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (32)

PosPart numberDescriptionQty
1 1135 640 3200 Oil pump 1
2 0000 958 0518 Washer 2
3 0000 997 0615 Compression spring 1
4 1135 647 0600 Pump piston 1
5 1125 641 9400 Bearing bushing 1
6 9646 945 0160 O-ring 4x2 2
7 1128 647 4806 Control bolt 1
8 9380 620 1090 Roll pin 2x10 1
9 1122 649 5000 Sealing ring B4x2 1
10 9022 313 0660 Spline screw IS-M4x12 2
11 1128 640 7112 Worm 1
12 1128 647 2400 Spring 1
13 1122 162 1000 Cover washer 52 mm / 2 1/16" 1
14 1128 162 3202 Carrier 1
15 1138 162 0800 Clutch shoe 3
16 1128 162 3000 Retainer 3
17 0000 997 5816 Tension spring 3
18 1128 162 1001 Cover washer 58 mm / 2 5/16'' 1
19 1128 162 0807 Clutch shoe Fitment / change note → 3
20 0000 997 5815 Tension spring 3
22 not sold separately Clutch drum not available as a separate item 1
23 0000 642 1223 Rim sprocket 3/8" 7T 1
24 0000 958 1032 Washer Ø 27 mm 1
25 9460 624 0801 E-clip 8x1.3 1
26 not sold separately Clutch drum not available as a separate item 1
27 0000 642 1239 NLA Rim sprocket 0.325" 9T 1
28 0000 642 1216 Rim sprocket 3/8" 8T option 1
Not numbered on the diagram — assemblies, kits and options
— 1135 160 2050 Clutch 1
— 1128 007 1000 Rim sprocket kit 3/8" 7T option 1
— 1135 007 1002 Rim sprocket kit 3/8" 7T option 1
— 1128 007 1011 Rim sprocket kit 0.325" 9T option 1
— 1128 007 1001 Rim sprocket kit 3/8" 8T option 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · MS 440 / MS 460 / MS 361 / MS 361 C

MS 440, MS 460 and MS 361 clutch change with guide strips

New complete clutch retrofits; individual shoe mixing is prohibited.

  • Previous clutch 1128 160 2001 with shoes 1128 162 0806 is replaced by clutch 1128 160 2004 with shoes 1128 162 0807. Mutually engaging guide strips improve lateral guidance, reducing shoe tilt, wear between shoe and carrier, and idle noise.
  • New complete clutch 1128 160 2004 may also be installed in older machines in the stated model scope. Introduction is CONTINUOUS: NO NUMERIC SERIAL CUTOFF is supplied. Other individual parts remain unchanged.
  • Previous complete clutch is no longer factory-available according to the historical summary; old shoe 1128 162 0806 remains available for the previous clutch and other model series. This is 2005 supply policy, not present stock availability. Observe the separate no-mixing/pairing restriction; do not infer a single-shoe retrofit.
  • Historical TI36/2005 English USA guidance only; the linked catalog sheets are navigation anchors, not proof that all later variants share these specifications. No physical interchange test was performed.

Source: TI 36/2005, p. 1 · TI 36/2005, p. 2 · TI 36/2005, p. 3 — MS 440, MS 460 and MS 361 clutch change with guide strips.

Part numbers (4)
  • 1128 160 2001 — Previous clutchReplaced complete assembly · MS 440, MS 460, MS 361, MS 361 C; see note restrictions
  • 1128 160 2004 — New clutchComplete assembly also fits older stated machines · MS 440, MS 460, MS 361, MS 361 C; see note restrictions
  • 1128 162 0806 — Previous clutch shoeRetained for previous clutch/other series · MS 440, MS 460, MS 361, MS 361 C; see note restrictions
  • 1128 162 0807 — Guide-strip clutch shoeNew design; no mixing with old shoes · MS 440, MS 460, MS 361, MS 361 C; see note restrictions

Service note · MS 440 / MS 460 / MS 361 / MS 361 C

Clutch shoe retrofit: no mixed designs; printed pairing remains ambiguous

The source says “in pairs” without giving an assembly count.

  • New shoe 1128 162 0807 CANNOT BE COMBINED with previous shoe 1128 162 0806. The next sentence says new shoes can only be fitted in the previous clutch “in pairs” because of the guide strips.
  • Preserve BOTH statements. The illustration shows engagement between neighboring guide strips; it does not specify a complete clutch shoe count. Do not interpret “in pairs” as permission for two new shoes plus one old shoe, silently rewrite it as a stated three-shoe set, or invent a mixed-clutch assembly procedure.
  • Exact individual-shoe retrofit quantity remains unresolved in this source. The explicit complete-clutch retrofit is separate and does not depend on guessing that quantity. Old shoes remain historically available for the previous clutch and other series; availability is not permission to mix designs.
  • Historical TI36/2005 English USA guidance only; the linked catalog sheets are navigation anchors, not proof that all later variants share these specifications. No physical interchange test was performed.

Source: TI 36/2005, p. 1 · TI 36/2005, p. 2 · TI 36/2005, p. 3 — Clutch shoe retrofit: no mixed designs; printed pairing remains ambiguous.

Part numbers (2)
  • 1128 162 0806 — Previous shoeCannot be mixed with guide-strip shoe · MS 440, MS 460, MS 361, MS 361 C; see note restrictions
  • 1128 162 0807 — Guide-strip shoePrinted pairing ambiguity; no mixed designs · MS 440, MS 460, MS 361, MS 361 C; see note restrictions

Wrong number or missing part for the MS 361, MS 361 C? Report a correction →