Stihl 1137 · Section F · 1 of 4 · 17 parts
Rewind starter ErgoStart/Easy2Start
Fits MS 192 T, MS 192 TC.
Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.
Parts (17)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1137 080 1801 | Fan housing Fitment / change note → | 1 |
| 2 | 1110 084 9102 | Bushing | 1 |
| 3 | 9104 003 2960 | Self-tapping screw P4x10 Fitment / change note → | 1 |
| 4 | 1123 190 0600 | Rewind spring | 1 |
| 5 | 1137 190 1000 | Rope rotor Fitment / change note → | 1 |
| 6 | 1137 195 3501 | Spring Fitment / change note → | 1 |
| 7 | 0000 958 1020 | Washer Fitment / change note → | 1 |
| 8 | not sold separately | Carrier not available as a separate item | 1 |
| 9 | 1123 195 7200 | Pawl | 2 |
| 10 | 0000 958 0923 | Washer | 1 |
| 11 | 1128 195 3500 | Spring | 1 |
| 12 | 1137 084 7800 | Segment | 1 |
| 13 | 1121 195 3400 | Starter grip | 1 |
| 14 | 0000 195 8204 | Starter rope Ø 2.7x800 mm | 1 |
| 15 | 1137 967 1503 | Model plate MS 192 TC | 1 |
| 16 | 9074 477 4130 | Pan head self-tapping screw IS-P5x16 | 4 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 1137 080 2105 | Fan housing with rewind starter Fitment / change note → | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · MS 192 C / MS 192 T / MS 192 TC-E
MS 192: Easy2Start rotor, washer and complete carrier supply
The new rotor assembly replaces separately supplied rotor and carrier.
- Easy2Start section 2.1 adds washer BETWEEN ROPE ROTOR AND CARRIER, illustrated in217TI040. Section 2.3 eliminates rope rotor 1137 195 0400 and carrier 1137 195 2000 as individual spares.
- New rope-rotor assembly 1137 190 1000 includes spring 1137 195 3501, washer 0000 958 1020 and carrier (summary items 4–6). New carrier is NOT separately available; no independent new carrier number is supplied. Summary repeats the previous carrier number in rows 2/6; this is not two carriers in the assembly.
- Do not confuse spring 1137 195 3501 in this rotor assembly with the housing rewind spring secured by screw 9104 003 2960. No preload turns, complete assembly sequence or retrofit permission is printed. Applies ONLY to the Easy2Start equipment described, not every standard starter on the cover models.
- Cover names MS 192 C, MS 192 T and MS 192 TC-E, series 1137. Equipment-specific headings and section 3’s narrower model list control applicability. Catalog TC is NOT silently aliased to TC-E; shared-sheet navigation does not expand the source roster to MS 193/194.
- Historical English-USA 2008 source, not present-day stock or approval for unlisted variants. No numeric serial cutoff is supplied. No physical interchange test was performed.
Source: TI 21/2008, p. 2 · TI 21/2008, p. 3 — MS 192: Easy2Start rotor, washer and complete carrier supply.
Part numbers (5)
- 1137 195 0400 — Previous rope rotorIndividual supply discontinued · MS 192 C / MS 192 T / MS 192 TC-E; source restrictions apply
- 1137 195 2000 — Previous carrierNo new separate carrier supply · MS 192 C / MS 192 T / MS 192 TC-E; source restrictions apply
- 1137 190 1000 — Rope-rotor assemblyIncludes spring, washer and carrier · MS 192 C / MS 192 T / MS 192 TC-E; source restrictions apply
- 1137 195 3501 — SpringIncluded in rotor assembly · MS 192 C / MS 192 T / MS 192 TC-E; source restrictions apply
- 0000 958 1020 — WasherBetween rotor and carrier · MS 192 C / MS 192 T / MS 192 TC-E; source restrictions apply
Service note · MS 192 C / MS 192 T / MS 192 TC-E
MS 192: Easy2Start spring-retaining screw and housing revision
The bare housing keeps its number; the complete starter changes number.
- Section 2.2, figure 217TI041: rewind spring is affixed to fan housing by self-tapping screw 9104 003 2960, identified as P4x10 in the summary. Factory housing gains a HOLE for the screw; no drilling coordinates or permission to improvise a hole are supplied.
- WITH EASY2START: fan housing 1137 080 1801 retains its number and now includes the hole and screw 9104 003 2960. Only the MODIFIED version is factory supplied.
- Complete fan housing WITH REWIND STARTER 1137 080 2103 is eliminated and replaced by 1137 080 2105 due to rotor AND housing changes. Do not collapse this into bare housing1801 or apply the Easy2Start rotor change to standard starter2100. No tightening torque is printed.
- Cover names MS 192 C, MS 192 T and MS 192 TC-E, series 1137. Equipment-specific headings and section 3’s narrower model list control applicability. Catalog TC is NOT silently aliased to TC-E; shared-sheet navigation does not expand the source roster to MS 193/194.
- Historical English-USA 2008 source, not present-day stock or approval for unlisted variants. No numeric serial cutoff is supplied. No physical interchange test was performed.
Source: TI 21/2008, p. 2 · TI 21/2008, p. 3 — MS 192: Easy2Start spring-retaining screw and housing revision.
Part numbers (4)
- 9104 003 2960 — Self-tapping screw P4x10Secures housing rewind spring · MS 192 C / MS 192 T / MS 192 TC-E; source restrictions apply
- 1137 080 1801 — Easy2Start fan housingSame number; hole and screw added · MS 192 C / MS 192 T / MS 192 TC-E; source restrictions apply
- 1137 080 2103 — Fan housing with Easy2Start starterPrevious · MS 192 C / MS 192 T / MS 192 TC-E; source restrictions apply
- 1137 080 2105 — Fan housing with Easy2Start starterNew · MS 192 C / MS 192 T / MS 192 TC-E; source restrictions apply
Wrong number or missing part for the MS 192 T, MS 192 TC? Report a correction →