Stihl 1206 · Section C · 3 of 5 · 33 parts
Oil pump, Chain brake
Fits E 14.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (33)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1206 640 0501 | Gear housing | 1 |
| 2 | 9513 003 1920 | Needle cage 8x12x10 | 1 |
| 3 | 1121 162 5205 | Pin | 1 |
| 4 | 1206 647 9401 | Delivery hose | 1 |
| 5 | 1206 647 9400 | Pickup hose | 1 |
| 6 | 1208 640 3000 | Pump housing | 1 |
| 7 | 1206 640 4700 | Pump piston | 1 |
| 8 | 9517 003 5060 | Cylindrical roller 4x10.8 | 1 |
| 10 | 1116 647 1806 | Spur gear | 1 |
| 11 | 0000 958 0504 | Washer | 1 |
| 12 | 9074 478 3075 | Pan head self-tapping screw IS-P4x19 | 2 |
| 14 | 1121 162 5010 | Lever | 1 |
| 15 | 0000 997 0628 | Spring | 1 |
| 16 | 9460 624 0400 | E-clip 4 | 1 |
| 17 | 1206 162 3200 | Carrier | 1 |
| 18 | 1206 160 5000 | Lever | 1 |
| 19 | 1206 160 5400 | Brake band | 1 |
| 20 | 9079 319 1350 | Flat head screw M6x25 | 1 |
| 21 | 1206 162 7900 | Tension spring | 1 |
| 22 | 1206 160 2402 | Brake drum | 1 |
| 23 | 1206 642 7801 | Washer | 2 |
| 24 | 1206 007 1002 | Gear wheel and pinion set | 1 |
| 25 | 1206 642 7600 | Slotted nut | 1 |
| 26 | 1206 351 0400 | Oil tank | 1 |
| 27 | 1206 646 1200 | Strainer | 1 |
| 28 | 1206 640 3600 | Oil filler cap | 1 |
| 29 | 1117 350 0905 | Filler cap retainer | 1 |
| 30 | 9099 021 2360 | Self-tapping screw 3.5x9.5 | 1 |
| 31 | 9645 945 2820 | O-ring 25x2.5 | 1 |
| 32 | 1206 790 9100 | Hand guard | 1 |
| 33 | 9099 021 4980 | Self-tapping screw 6.3x32 | 1 |
| 34 | 1206 086 0502 | Fanwheel | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 1208 640 3250 | Oil pump Fitment / change note → | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · E 14 / E 20 / E 140 / E 180 C
E 14 / E 20 / E 140 / E 180 C: metal-housing replacement oil pump
The bulletin explicitly permits pump 1208 640 3250 in the older E 14 and E 20.
- Section 1.2 describes a METAL pump housing. Oil pump 1208 640 3250 is supplied as a replacement part for the new saws and can ALSO be installed in E 14 and E 20.
- This is a complete oil-pump fitment statement, not authority to swap individual pump internals, gear housings or brakes. No previous pump number, modification, oil-output specification or serial restriction is printed.
- The exact numbered pump appears on the E 14 sheet C (oil pump/chain brake), E 20/E 220 sheet C (oil pump/chain brake) and E 140/E 160/E 180 C sheet B (gear housing/oil pump). Shared sheet labels do NOT add E 220, E 160 or MSE fitment to this bulletin assertion. Factory spare supply in 1997 is not current availability.
- TI02/1997 provides no serial cutoff. Shared catalog sheets do not extend this note to unnamed models, MSE successors or other voltage versions. No hardware operation was performed.
Source: TI 2/1997, p. 2 — E 14 / E 20 / E 140 / E 180 C: metal-housing replacement oil pump.
Part numbers (1)
- 1208 640 3250 — Oil pump with metal housingreplacement; expressly also fits E 14 and E 20 · E 140 and E 180 C context; E 14 and E 20 explicitly named
Wrong number or missing part for the E 14? Report a correction →