← Brushcutters & other equipment · series 4119

Stihl 4119 · Section O · 14 of 17 · 27 parts

Gear head 3 42 828 253

Fits FS 220, FS 220 K, FS 280, FS 280 K, FS 290.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131415161718192202122232425344056789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (27)

PosPart numberDescriptionQty
1 4119 640 0501 Gear housing Fitment / change note → 1
2 9022 341 1050 Spline screw IS-M5x25 2
3 9022 313 0930 Spline screw IS-M5x8 2
4 4119 713 6500 Screw plug 1
5 4119 642 0601 Drive shaft 1
6 9503 003 7450 Grooved ball bearing 6202-2RS 1
7 not sold separately Spur bevel gear not available as a separate item 1
8 not sold separately Drive pinion not available as a separate item 1
9 9503 003 0100 Grooved ball bearing 6000 1
10 9503 003 0210 Grooved ball bearing 6001 1
11 9503 003 5180 Grooved ball bearing 6001-Z 1
12 9455 621 1130 Circlip 12x1 1
13 9456 621 3100 Circlip 28x1.2 1
14 9456 621 3860 Circlip 35x1.5 1
15 4119 717 2807 Guard ring 1
16 4119 717 2806 Guard ring 1
17 4119 717 3100 Cover plate 1
18 4116 710 3800 Thrust plate Ø 60 mm / 2 3/8" 1
19 4116 717 2800 Guard washer Ø 60 mm / 2 3/8'' 1
20 4119 717 2800 Guard washer 1
21 4116 713 1600 Thrust washer Ø 60 mm / 2 3/8" 1
22 4116 713 3100 Rider plate 1
23 4119 713 3100 Rider plate 1
24 4119 642 7600 Collar nut M12x1.5 l/h thread 1
25 0781 120 1117 Gear lubricant 80 g option 1
40 0000 958 0503 Washer Fitment / change note → 2
Not numbered on the diagram — assemblies, kits and options
— 4119 640 7300 Set of pinions 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · FS 220 / FS 280

FS 220 / FS 280: same-number aluminum gearhead

The cast >AL< mark identifies the changed housing; two clamp-slot washers are deleted only with the new construction.

X 33 466 044 — Aluminum gearhead/housing introduced for FS 220 / FS 280; not a new part-number or later IPL boundary.

  • From machine number X 33 466 044, FS 220 / FS 280 gearhead housings change from magnesium alloy to aluminum. The clamp area is modified for increased strength; this is the source claim, not a measured strength result.
  • Gearhead 4119 640 0102 includes gear housing 4119 640 0501. Both ordering numbers remain unchanged across the revision. The aluminum housing is identified by integrally cast letters >AL<; a part-number match alone does not identify its material or clamp configuration.
  • The two washers 0000 958 0503 previously fitted in the clamp slot are no longer required with the modified housing and are deleted from the new construction. The original housings included these washers. This is not permission to remove washers from an original magnesium housing.
  • Only the modified gearhead and housing versions were available from the factory in this dated bulletin. The washers remained available as spares for older machines; this is historical availability, not a current-stock statement.
  • The linked IPL sheet includes later model/serial labels; those labels are not this bulletin's introduction boundary. No FS 290, K-version or FR 220 extension, assembly torque or blanket cross-model gearhead interchange is inferred.

Source: TI 31/1996, p. 1 — Section1 complete text, summary inclusion rows and both supply remarks.

Part numbers (3)
  • 4119 640 0102 — GearheadSame number, changed construction · FS 220 / FS 280
  • 4119 640 0501 — Gear housingSame number; >AL< identifies aluminum · FS 220 / FS 280
  • 0000 958 0503 — Washer, twoDeleted for modified clamp; retained spare · Original magnesium-housing configuration

Wrong number or missing part for the FS 220, FS 220 K, FS 280, FS 280 K, FS 290? Report a correction →