Stihl 4123 · Section H · 8 of 12 · 49 parts
Drive tube assembly, Loop handle
Fits FS 62, FS 66.
Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.
Parts (49)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4122 710 7105 | Drive tube assembly | 1 |
| 3 | 4114 182 8200 | Flexible shaft | 1 |
| 4 | 4133 717 2000 | Cap | 1 |
| 5 | 4123 710 7100 | Drive tube assembly | 1 |
| 6 | not sold separately | Bearing bushing not available as a separate item | 6 |
| 7 | 4123 717 2000 | Cap | 1 |
| 8 | 4123 711 3200 | Drive shaft | 1 |
| 9 | 4114 710 6701 | Hose clamp | 1 |
| 10 | 9022 341 1270 | Spline screw IS-M6x14 | 1 |
| 11 | 4125 791 0802 | Handle molding, outer | 1 |
| 12 | 4126 182 4506 | Torsion spring | 1 |
| 13 | 4126 182 0806 | Lockout lever | 1 |
| 14 | 4126 182 6210 | Collar screw | 1 |
| 15 | 4125 790 1102 | Handle molding, inner | 1 |
| 16 | 4126 791 5300 | Connector tag | 2 |
| 17 | 4126 182 1705 | Slide control | 1 |
| 18 | 4126 182 4705 | Detent spring | 1 |
| 19 | 4126 182 6205 | Collar screw | 1 |
| 20 | 4126 182 4505 | Torsion spring | 1 |
| 21 | 9417 003 7510 | Push nut | 1 |
| 22 | 4125 182 1001 | Throttle trigger | 1 |
| 23 | 4125 791 9400 | Hose clamp | 2 |
| 24 | 4126 792 6100 | Square washer | 4 |
| 25 | 9022 341 0980 | Spline screw IS-M5x16 | 2 |
| 26 | 9074 478 3065 | Pan head self-tapping screw IS-P4x19 | 4 |
| 27 | 4126 182 4507 | Torsion spring | 1 |
| 29 | 9208 260 0900 | Hexagon nut M6 | 2 |
| 30 | not sold separately | Lead 670 mm / 26.4'' | 1 |
| 31 | not sold separately | Lead 820 mm / 32.3'' | 1 |
| 32 | 0751 030 8487 | Round plug no longer available from factory | 1 |
| 33 | 0751 030 8953 NLA | Terminal socket 4.8-1 no longer available from factory | 3 |
| 34 | 0751 030 8470 | Grommet no longer available from factory | 3 |
| 35 | not sold separately | Hose 435 mm / 17 1/4'' | 1 |
| 36 | 4121 791 7200 | Sleeve | 1 |
| 37 | 4130 790 1315 | Loop handle | 1 |
| 38 | 4130 790 8450 | Barrier bar | 1 |
| 39 | 9222 068 0900 | Square nut M6 | 2 |
| 40 | 9022 341 1370 | Spline screw IS-M6x30 | 2 |
| 41 | 4123 791 7400 | Clamp | 2 |
| 42 | 9291 021 0140 | Washer 6.4 | 2 |
| 43 | 9022 341 1350 | Spline screw IS-M6x25 | 2 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 4125 790 1303 | Control handle | 1 |
| — | 4123 790 1313 | Control handle | 1 |
| — | 4123 791 0801 | Handle molding, outer not illustrated | 1 |
| — | 4123 790 1102 | Handle molding, inner not illustrated | 1 |
| — | 4126 182 1007 | Throttle trigger not illustrated | 1 |
| — | 4123 791 9400 | Hose clamp not illustrated | 2 |
| — | 0751 010 1110 | Lead 10 m / 33' not illustratedoption | 1 |
| — | 4203 711 7201 | Hose 960 mm / 37 13/16'' not illustratedoption | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Conditional replacement · FS 66
FS 66 R: new loop handle for replacement only
Original and new handle assignments retain production, replacement and variant restrictions.
- FS 66 R (source series 4123): original forms 1 AND 3 → new handle 6, –/X, not new-production assignment. Remark 1 changes the tube label without changing its number.
- Former handle 1 (4123 790 1300) remains available for OTHER models; metal handle 3 (4126 790 3400) is old-stock-only. The page 4 forms are distinct; the two former numbers are not aliases.
- Page 5 A refers to the handle figure on page 4 AND the matching item in section 6; B is a drive-tube item number, not a diameter or complete assembly part number. X/X means standard production AND replacement; –/X means replacement only. Blank tube-number cells with remark 1 mean new instruction label with the SAME tube number, not removal of the tube.
- New handle 6 is 4130 790 1316. Handle 7 is NOT available as a separate item: use handle 6 plus barrier bar 30 (4130 791 4400). Neither assembly choice alone authorizes a cutting tool: the page 2 blade/barrier/universal-deflector restrictions still apply.
- The printed source is December 21, 1995; introduction is in progress with mixed inventories, not a serial cutoff or proof of installed revision. Catalog title says New Zealand only while the printed matrix includes Southeast Asia; territory discrepancy retained. Historical TI 39/1995 guidance, not current stock or verified physical interchange. No hardware operation was performed.
- Exact-model IPL navigation only; shared-sheet companion models are NOT added to the source assignment. Printed source series identifiers are retained separately from catalog navigation series.
Source: TI 39/1995, p. 4 · TI 39/1995, p. 5 · TI 39/1995, p. 6 · TI 39/1995, p. 7 · TI 39/1995, p. 8 — Section 5, FS 66 R: new loop handle for replacement only; section 6 row/remark joins.
Part numbers (3)
- 4123 790 1300 — Former handle 1Source matrix/table component; restrictions in conditions · FS 66 R: new loop handle for replacement only
- 4126 790 3400 — Former metal handle 3Source matrix/table component; restrictions in conditions · FS 66 R: new loop handle for replacement only
- 4130 790 1316 — New loop handle 6Source matrix/table component; restrictions in conditions · FS 66 R: new loop handle for replacement only
Service note · FS 66 / FS 81 / FS 88
FS 66/81/88: 24 mm bike-to-loop kit 4123 007 1003
Historical model, tube diameter and included-handle distinctions remain explicit.
- Item 45 is for 24 mm (0.945 in) drive tubes on FS 66, FS 81 and FS 88; includes metal loop handle 3 (4126 790 3400). Do not add FS 86 merely because it shares an IPL sheet.
- Original bike-handle-to-loop conversion kit supplied only while factory stocks last (remark 4). Section 2 says NO NEW VERSIONS of these kits will be offered; future conversions use individual handle components. This is not withdrawal of accessory kit 4130 007 1030.
- The printed inclusion is not an exhaustive kit bill of materials: remark 16 refers component parts to the parts list for the machine concerned. Retained 01-2012 IPLs are later references, not established 1995 kit-content evidence. Do not fill the historical kit from neighboring drawing rows.
- Historical TI 39/1995 guidance dated December 21, 1995, not current stock or verified physical interchange. No hardware operation was performed.
- Exact-model IPL links are navigation only, not a verified 1995 kit bill of materials. Shared sheets do NOT add FS 62, FS 72 or FS 180 to these kit assignments. Catalog title New Zealand only conflicts with the printed cover and Southeast Asia matrix entries; territory discrepancy retained.
Source: TI 39/1995, p. 3 · TI 39/1995, p. 7 · TI 39/1995, p. 8 — Section 6, FS 66/81/88: 24 mm bike-to-loop kit 4123 007 1003; section 2 stock limits and component-table joins.
Part numbers (2)
- 4123 007 1003 — Original bike-to-loop conversion kitTI-listed kit or included component; restrictions in conditions · FS 66/81/88: 24 mm bike-to-loop kit 4123 007 1003
- 4126 790 3400 — Included metal loop handle, item 3TI-listed kit or included component; restrictions in conditions · FS 66/81/88: 24 mm bike-to-loop kit 4123 007 1003
Wrong number or missing part for the FS 62, FS 66? Report a correction →