Stihl 4126 · Section O · 14 of 14 · 23 parts
Tools, Extras
Fits FS 88.
Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.
Parts (23)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4128 890 3400 | Combination wrench | 1 |
| 2 | 4130 893 7800 | Locking pin | 1 |
| 3 | 0000 890 2300 NLA | Screwdriver | 1 |
| 4 | 4119 710 9001 | Full harness Fitment / change note → | 1 |
| 5 | 4119 710 6306 | Backplate with strap | 1 |
| 6 | not sold separately | Strap 38x780mm / 1.5x30.7'' not available as a separate item | 1 |
| 7 | not sold separately | Strap 25 mm x 1.18 m / 1x46.5'' not available as a separate item | 1 |
| 8 | 4203 792 7200 | Slide | 3 |
| 9 | 4119 718 6300 | Slide | 1 |
| 10 | 4119 718 6310 | Slide | 2 |
| 11 | 4119 710 6406 | Buckle with strap | 1 |
| 12 | 4119 718 7400 | Guard plate | 1 |
| 13 | 4119 710 6906 | Spring safety hook | 1 |
| 14 | 9408 021 4530 | Rivet shank 4x8x6 | |
| 15 | 9409 021 4420 | Rivet head 4x8 | |
| 16 | 4119 710 9012 | Harness | 1 |
| 17 | not sold separately | Strap 25 mm x 1.86 m / 1x73'' not available as a separate item | 1 |
| 18 | 4119 718 6320 NLA | Slide | 1 |
| 19 | 0000 884 0307 | Safety glasses option | 1 |
| 20 | 0000 891 0801 NLA | Tool roll option | 1 |
| 21 | 0783 830 2000 | Tube of sealant Dirko HT red option | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 0000 930 2242 | Webbing 38 mm x 5 m / 1.5x197'' not illustratedoption | 1 |
| — | 0000 930 2241 | Webbing 25 mm x 10 m / 1'' x 33' not illustratedoption | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · FS 88 / FS 108
FS 88 / 108: sharpening aids by tool type
Scratcher-tooth and chisel-tooth saw blades use different listed aids.
- Flat file 0814 212 3310: cutting blades 230-4 / 230-8, brush knife 250 and circular saw 200 SCRATCHER tooth. File holder 5605 750 4343 INCLUDING 5.5 mm round file 0811 411 8108: circular saw 200 CHISEL tooth.
- Sharpening template 0457 342 2629: brush knife 250. STIHL balancer 5910 850 2600: universal application as printed. No filing angle, blade wear limit or sharpening procedure given. These aids do not override the loop-handle metal-tool prohibition.
- Historical TI 37/1994 source guidance, not present-day approval, current stock or a physical interchange test. No serial cutoff is supplied. Exact-model catalog links are navigation, not proof that later service parts or carburetor variants equal the original configuration. No hardware operation was performed.
Source: TI 37/1994, p. 2 · TI 37/1994, p. 6 — FS 88 / 108: sharpening aids by tool type.
Part numbers (5)
- 0814 212 3310 — Flat sharpening filehistorical listed item · FS 88 / 108: sharpening aids by tool type
- 5605 750 4343 — File holder including 5.5 mm round filehistorical listed item · FS 88 / 108: sharpening aids by tool type
- 0811 411 8108 — Included 5.5 mm round filehistorical listed item · FS 88 / 108: sharpening aids by tool type
- 0457 342 2629 — Brush knife sharpening templatehistorical listed item · FS 88 / 108: sharpening aids by tool type
- 5910 850 2600 — STIHL balancerhistorical listed item · FS 88 / 108: sharpening aids by tool type
Service note · FS 88 / FS 108
FS 88 / 108: harnesses and transport guards
The blade/brush-knife transport guard differs from the circular-saw guard.
- Safety goggles depend on market; no universal number printed. Shoulder strap 4119 710 9010; full harness 4119 710 9001; full harness L 4108 710 9001. No size conversion or permission to omit protection supplied.
- Transport guard 4119 790 3906: cutting blades 230-4 / 230-8 and brush knife 250-3. Guard 4119 790 3901: circular saw 200, scratcher OR chisel tooth. Transport protection is not an operating deflector or permission for metal tools on loop-handle machines.
- Historical TI 37/1994 source guidance, not present-day approval, current stock or a physical interchange test. No serial cutoff is supplied. Exact-model catalog links are navigation, not proof that later service parts or carburetor variants equal the original configuration. No hardware operation was performed.
Source: TI 37/1994, p. 6 · TI 37/1994, p. 7 — FS 88 / 108: harnesses and transport guards.
Part numbers (5)
- 4119 710 9010 — Shoulder straphistorical listed item · FS 88 / 108: harnesses and transport guards
- 4119 710 9001 — Full harnesshistorical listed item · FS 88 / 108: harnesses and transport guards
- 4108 710 9001 — Full harness Lhistorical listed item · FS 88 / 108: harnesses and transport guards
- 4119 790 3906 — Transport guard for cutting blades and brush knifehistorical listed item · FS 88 / 108: harnesses and transport guards
- 4119 790 3901 — Transport guard for both circular-saw tooth formshistorical listed item · FS 88 / 108: harnesses and transport guards
Wrong number or missing part for the FS 88? Report a correction →