Stihl 4128 · Section M · 12 of 21 · 27 parts
Drive tube assembly
Fits FS 400, FS 450, FS 480.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (27)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4128 710 7104 | Drive tube assembly Ø 28 mm x 1.49 m / 1 1/8'' x 58 11/16" | 1 |
| 2 | 4128 710 7115 | Drive tube assembly Ø 28 mm x 1.36 m / 1 1/8'' x 9/16" | 1 |
| 3 | 4128 710 7113 | Drive tube assembly Ø 28 mm x 1.36.m / 1 1/8'' x 9/16" | 1 |
| 4 | 4128 710 7106 | Drive tube assembly Ø 28 mm / 1 1/8'' x 1.55 m / 61" | 1 |
| 5 | not sold separately | Flexible liner 1365 mm / 53 3/4'' not available as a separate item | 1 |
| 6 | 0000 967 3725 | Warning pictogram FS | 1 |
| 7 | 4128 711 2100 | Plug | 2 |
| 8 | 4128 711 7310 | Flexible liner 1235 mm / 48 5/8'' | 1 |
| 9 | 0000 967 3684 | Warning pictogram FS | 1 |
| 10 | not sold separately | Flexible liner 1425 mm / 56 1/8'' not available as a separate item | 1 |
| 11 | 4128 711 3200 | Drive shaft | 1 |
| 12 | 4128 711 3210 | Drive shaft | 1 |
| 13 | 4128 711 3202 | Drive shaft | 1 |
| 15 | 4128 791 9800 | Square nut | 1 |
| 16 | 4128 792 9300 | Rubber buffer | 4 |
| 17 | 4128 790 7650 | Support | 1 |
| 18 | 9022 341 1010 | Spline screw IS-M5x18 | 1 |
| 19 | 4128 710 6700 | Hose clamp | 1 |
| 20 | 9291 021 0140 | Washer 6.4 | 1 |
| 21 | 9075 478 4718 | Pan head self-tapping screw IS-D6x32 | 1 |
| 22 | 4128 791 7500 | Cover | 1 |
| 23 | 4128 792 2400 | Lead retainer | 2 |
| 24 | 9022 341 1350 | Spline screw IS-M6x25 | 1 |
| 25 | 9214 320 0900 | Lock nut M6 | 1 |
| 26 | 9291 021 0140 | Washer 6.4 | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 4128 711 7301 | Flexible liner 1425 mm / 56 1/8'' not illustratedoption | 1 |
| — | 0781 120 1110 | Gear lubricant 225 g not illustratedoption | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · FS 120 / FS 200 / FS 350 / FS 400 / FS 450
FS120/200/350/400/450: clutch and rigid-shaft construction
Two unlined clutch shoes;4,300 rpm engagement is not idle or cut-off speed.
- Clutch uses TWO LARGE-DIAMETER SHOES WITHOUT LININGS. The rigid drive shaft is supported in a FULL-LENGTH LINER. Neither description supplies part numbers, wear limits, lubrication intervals or a shaft conversion.
- Every engine-table column gives clutch engagement at4,300 rpm. Do not confuse that value with2,800 rpm idle, electronic cut-off without a cutting tool, or the rated output-shaft speed. No field clutch test was performed.
- Historical TI42/1997 configurations only, not all later versions sharing a model name. No hardware operation was performed. No part interchange or numeric serial cutoff is established.
Source: TI 42/1997, p. 3 — Section1 clutch/shaft; section2.1.1 clutch row.
No additional parts-table entry added.
Wrong number or missing part for the FS 400, FS 450, FS 480? Report a correction →