← FR 106

Stihl 4132 · Section J · 9 of 16 · 30 parts

Flexible shaft, Loop handle

Fits FR 106.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111213141516171819220212122232324242525252526273344041425566789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (30)

PosPart numberDescriptionQty
1 4132 710 3000 Flexible shaft 1
2 4132 711 3300 Flexible shaft 1
3 4132 711 8400 Rubber ring 2
4 4132 182 2100 Retainer 2
5 9645 945 7570 O-ring 15.54x2.62 2
6 4125 717 2000 Cap 2
7 4132 161 0505 Housing 1
8 4132 162 5000 Lever 1
9 4132 162 7800 Torsion spring 1
10 0000 958 0600 Washer 1
11 9460 624 0500 E-clip 5 1
12 9022 341 0950 Spline screw IS-M5x10 1
13 9022 341 1350 Spline screw IS-M6x25 1
14 4132 162 7600 Shaft 1
15 9503 003 8052 Grooved ball bearing 6901-2Z 1
16 9452 621 1130 Circlip 12x1 1
17 9456 621 2660 Circlip 24x1.2 1
18 4132 162 2800 Cap 1
19 4132 710 7100 Drive tube assembly Ø 26 mm / 1 1/16'' 1
20 4117 711 3200 Drive shaft 1
21 4130 790 1315 Loop handle 1
22 4130 790 8450 Barrier bar 1
23 9222 068 0900 Square nut M6 2
24 9022 341 1370 Spline screw IS-M6x30 2
25 4123 791 7400 Clamp 2
26 9291 021 0140 Washer 6.4 2
27 9022 341 1350 Spline screw IS-M6x25 2
40 0000 958 0600 Washer 1
41 4118 790 7500 Tommy screw 1
42 9022 341 1260 Spline screw IS-M6x12 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Conditional replacement · FR 106

FR 106: replacement forms and recommended barrier handle

Original and new handle assignments retain production, replacement and variant restrictions.

  • FR 106 (source series 4132): former handle 4 → forms 6 OR 7, –/X, remarks 1, 2 and 6. This is older-machine replacement with unchanged tube number/new label; handle 7 is RECOMMENDED, not stated as the sole choice.
  • Separate Southeast Asia row: former form 8 → handle 6, –/X, remarks 1, 2 and 5. The recommendation on the form-4 row is not silently transferred to the region-specific form-8 row.
  • Former handle 4 is 4132 790 1310, old-stock-only; form 8 is handle hose 4114 791 2002, still available as spare. Page 4 silhouette 4 and rectangular form 8 are not interchangeable identifiers.
  • Page 5 A refers to the handle figure on page 4 AND the matching item in section 6; B is a drive-tube item number, not a diameter or complete assembly part number. X/X means standard production AND replacement; –/X means replacement only. Blank tube-number cells with remark 1 mean new instruction label with the SAME tube number, not removal of the tube.
  • New handle 6 is 4130 790 1316. Handle 7 is NOT available as a separate item: use handle 6 plus barrier bar 30 (4130 791 4400). Neither assembly choice alone authorizes a cutting tool: the page 2 blade/barrier/universal-deflector restrictions still apply.
  • The printed source is December 21, 1995; introduction is in progress with mixed inventories, not a serial cutoff or proof of installed revision. Catalog title says New Zealand only while the printed matrix includes Southeast Asia; territory discrepancy retained. Historical TI 39/1995 guidance, not current stock or verified physical interchange. No hardware operation was performed.
  • Exact-model IPL navigation only; shared-sheet companion models are NOT added to the source assignment. Printed source series identifiers are retained separately from catalog navigation series.

Source: TI 39/1995, p. 4 · TI 39/1995, p. 5 · TI 39/1995, p. 6 · TI 39/1995, p. 7 · TI 39/1995, p. 8 — Section 5, FR 106: replacement forms and recommended barrier handle; section 6 row/remark joins.

Part numbers (4)
  • 4132 790 1310 — Former handle 4Source matrix/table component; restrictions in conditions · FR 106: replacement forms and recommended barrier handle
  • 4114 791 2002 — Former handle hose/form 8Source matrix/table component; restrictions in conditions · FR 106: replacement forms and recommended barrier handle
  • 4130 790 1316 — New loop handle 6Source matrix/table component; restrictions in conditions · FR 106: replacement forms and recommended barrier handle
  • 4130 791 4400 — Barrier bar 30; combine with handle 6 for form 7Source matrix/table component; restrictions in conditions · FR 106: replacement forms and recommended barrier handle

Wrong number or missing part for the FR 106? Report a correction →