← Augers/Drills & other equipment · series 4134

Stihl 4134 · Section N · 13 of 18 · 34 parts

Bike handle

Fits FS 120, FS 120 R, FS 200, FS 200 R, FS 250, FS 250 R.

Parts diagrams →

Historical fitment & changes (3) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131415161718192202122232425262728293330313233456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (34)

PosPart numberDescriptionQty
1 4128 790 1701 Handlebar Fitment / change note → 1
2 4128 791 0300 Handle, left 1
3 4128 790 0304 Handle, right 1
4 9074 478 3025 Pan head self-tapping screw IS-P4x16 3
5 4128 182 1700 Slide control 1
6 4128 182 4201 Detent spring 1
7 4128 182 6200 Collar screw 1
8 4128 182 4502 Torsion spring 1
9 4128 182 4504 Torsion spring 1
10 4128 182 4500 Torsion spring 1
11 4128 182 1000 Throttle trigger 1
12 4128 182 4501 Torsion spring 1
13 4128 182 0800 Lockout lever 1
14 4128 793 3000 Slide 1
15 4128 791 3100 Spring 1
16 9214 320 0700 Lock nut M5 1
17 9022 346 1070 Spline screw IS-M5x30 1
18 9291 021 0120 Washer 5.3 1
19 4128 180 1112 Throttle cable 1
20 4128 182 3203 Throttle cable 1
21 4134 182 2104 Support, bottom 1
22 4134 180 6702 Support 1
23 9075 478 4159 Pan head self-tapping screw IS-D5x24 1
24 9291 021 0120 Washer 5.3 1
25 4134 790 7600 Support Fitment / change note → 1
26 4134 791 0900 Clamp Fitment / change note → 1
27 9022 341 1370 Spline screw IS-M6x30 Fitment / change note → 2
28 0000 997 1701 Compression spring Fitment / change note → 1
29 4128 791 0905 Clamp, base Fitment / change note → 1
30 0000 997 1304 Compression spring Fitment / change note → 1
31 4128 791 0900 Clamp, top Fitment / change note → 1
32 9291 021 0140 Washer 6.4 1
33 4128 790 7501 Tommy screw 1
Not numbered on the diagram — assemblies, kits and options
— 4128 790 1309 Control handle 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Conditional replacement · FS 250

TI09: FS 250 rotating support and mowing handlebar

The support includes items1–9, not the separate mowing handlebar; old parts remain listed for older machines.

  • The original contents on page1 and section4 heading on page19 both say FS 250 only. The imported catalog title had broadened this to FS 120, 200, 250 only; that title is corrected from the original scans, not treated as additional fitment evidence.
  • The new rotating support permits tool-free handlebar installation and swivelling for transport. Universal handlebar 4137 790 1701 is replaced by mowing handlebar 4128 790 1701, shaped for extended mowing movements. This is a described FS 250 production change, not blanket conversion approval for other models.
  • Support assembly 4134 790 3200 includes items1–9: wing bolt, washer, top clamp, upper compression spring, base clamp, lower compression spring, support, clamp and IS-M6x30-10.9 screw. Handlebar 4128 790 1701 is separate item10 and is NOT listed as part of the support assembly.
  • The old clamps4137 791 0900,4137 791 6800 and4130 791 0606, old IS-M6x35-10.9 screw9022 341 1380 and old universal handlebar4137 790 1701 carry remark1: remain available for older machines and other models. No one-to-one clamp interchange or current stock claim is inferred. The drawing distinguishes old items11–15 from new items1–10.
  • Introduction is in progress. No serial cutoff, tightening torque, explicit older-machine retrofit procedure or unlisted kit contents are supplied.
  • Only bike-handled FS 250 is covered by section4. Shared FS 120/200/250 and R-variant catalog sheets do not extend this assertion to FS 120, FS 200 or loop-handled machines. The FS 350–450 installation comparison is not an interchangeability claim. No physical interchange test was performed.

Source: TI 9/2003, p. 1 · TI 9/2003, p. 19 · TI 9/2003, p. 20 — 4 introduction and4.3 complete illustrated roster.

Part numbers (16)
  • 4134 790 3200 — Handlebar support assemblyIncludes items1–9 only · FS 250 bike handle, TI09 section4 only
  • 4128 790 7500 — Wing boltItem1 · FS 250 bike handle, TI09 section4 only
  • 0000 958 0609 — WasherItem2 · FS 250 bike handle, TI09 section4 only
  • 4128 791 0900 — Top clampItem3 · FS 250 bike handle, TI09 section4 only
  • 0000 997 1304 — Upper compression springItem4 · FS 250 bike handle, TI09 section4 only
  • 4128 791 0905 — Base clampItem5 · FS 250 bike handle, TI09 section4 only
  • 0000 997 1701 — Lower compression springItem6 · FS 250 bike handle, TI09 section4 only
  • 4134 790 7600 — SupportItem7 · FS 250 bike handle, TI09 section4 only
  • 4134 791 0900 — ClampItem8 · FS 250 bike handle, TI09 section4 only
  • 9022 341 1370 — Spline screw IS-M6x30-10.9Item9 · FS 250 bike handle, TI09 section4 only
  • 4128 790 1701 — Mowing handlebarSeparate item10 · FS 250 bike handle, TI09 section4 only
  • 4137 791 0900 — Previous clampItem11; historical supply retained · FS 250 bike handle, TI09 section4 only
  • 4137 791 6800 — Previous clampItem12; historical supply retained · FS 250 bike handle, TI09 section4 only
  • 4130 791 0606 — Previous clampItem13; historical supply retained · FS 250 bike handle, TI09 section4 only
  • 9022 341 1380 — Previous spline screw IS-M6x35-10.9Item14; historical supply retained · FS 250 bike handle, TI09 section4 only
  • 4137 790 1701 — Previous universal handlebarItem15; historical supply retained · FS 250 bike handle, TI09 section4 only

Conditional replacement · FS 250

TI09: FS 250 handlebar support orientation and distances

Ridge toward gearhead, wing bolt toward powerhead; retain both distinct mounting dimensions.

  • The handlebar is mounted on the new support in the same way as FS 350 to FS 450 brushcutters. That is an installation comparison, not evidence that the FS 250 support fits those models.
  • During installation the ridge in support(1) must point toward the gearhead and wing bolt(2) toward the powerhead. Original diagram250TI056 shows the two orientations; do not reverse them.
  • Mount the support at distance a = 36 cm (14 1/8 in) from the powerhead. The handlebar must not protrude beyond the support by more than b = 15 cm (5 7/8 in). Dimension a is the mounting distance; b is a maximum protrusion, not a second powerhead distance.
  • Use the original diagram for the reference locations. No torque, alternative handlebar geometry or worldwide/model-series applicability is supplied.
  • Only bike-handled FS 250 is covered by section4. Shared FS 120/200/250 and R-variant catalog sheets do not extend this assertion to FS 120, FS 200 or loop-handled machines. The FS 350–450 installation comparison is not an interchangeability claim. No physical interchange test was performed.

Source: TI 9/2003, p. 1 · TI 9/2003, p. 19 · TI 9/2003, p. 20 — 4.1 installation and diagram250TI056.

Part numbers (3)
  • 4134 790 3200 — Rotating handlebar supportObserve ridge direction and36cm mounting distance · FS 250 bike handle, TI09 section4 only
  • 4128 790 7500 — Wing boltPoints toward powerhead · FS 250 bike handle, TI09 section4 only
  • 4128 790 1701 — Mowing handlebarMaximum15cm protrusion · FS 250 bike handle, TI09 section4 only

Conditional replacement · FS 250

TI09: FS 250 handlebar transport and return sequence

Turn clockwise90 degrees before lowering; reverse counterclockwise to restore the operating position.

  • Operating to transport: slacken the wing bolt(1) and unscrew it until handlebar(2) can turn clockwise. Turn the handlebar90 degrees, then swivel it downward. Tighten the wing bolt again.
  • Transport to operating: reverse that procedure, turning and swivelling counterclockwise. Refastening is part of the reversed sequence; no numerical torque or additional rotation is invented.
  • The direction and90-degree rotation follow original diagram249TI038 on page19. This sequence applies to the new rotating FS 250 support, not the old fixed clamp or every bike-handle assembly.
  • Only bike-handled FS 250 is covered by section4. Shared FS 120/200/250 and R-variant catalog sheets do not extend this assertion to FS 120, FS 200 or loop-handled machines. The FS 350–450 installation comparison is not an interchangeability claim. No physical interchange test was performed.

Source: TI 9/2003, p. 1 · TI 9/2003, p. 19 · TI 9/2003, p. 20 — 4.2 swivelling and diagram249TI038.

Part numbers (3)
  • 4128 790 7500 — Wing boltSlacken for rotation; tighten after positioning · FS 250 bike handle, TI09 section4 only
  • 4134 790 3200 — Rotating supportNew FS250 configuration · FS 250 bike handle, TI09 section4 only
  • 4128 790 1701 — Mowing handlebarClockwise90 degrees then downward for transport · FS 250 bike handle, TI09 section4 only

Wrong number or missing part for the FS 120, FS 120 R, FS 200, FS 200 R, FS 250, FS 250 R? Report a correction →