← FR 125, FR 135, FR 145 · FS 108 · FR 108

Stihl 4135 · Section P · 15 of 15 · 23 parts

Tools, Extras

Fits FR 108.

Parts diagrams →

Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
11010111213131414151516171819220213456788889
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (23)

PosPart numberDescriptionQty
1 4128 890 3400 Combination wrench 1
2 4130 893 7800 Locking pin 1
3 0000 890 2300 NLA Screwdriver 1
4 4119 710 9001 Full harness 1
5 4119 710 6306 Backplate with strap 1
6 not sold separately Strap 38x780mm / 1.5x30.7'' not available as a separate item 1
7 not sold separately Strap 25 mm x 1.18 m / 1x46.5'' not available as a separate item 1
8 4203 792 7200 Slide 3
9 4119 718 6300 Slide 1
10 4119 718 6310 Slide 2
11 4119 710 6406 Buckle with strap 1
12 4119 718 7400 Guard plate 1
13 4119 710 6906 Spring safety hook 1
14 9408 021 4530 Rivet shank 4x8x6
15 9409 021 4420 Rivet head 4x8
16 4119 710 9012 Harness 1
17 not sold separately Strap 25 mm x 1.86 m / 1x73'' not available as a separate item 1
18 4119 718 6320 NLA Slide 1
19 0000 884 0307 Safety glasses 1
20 0000 891 0801 NLA Tool roll option 1
21 0783 830 2000 Tube of sealant Dirko HT red option 1
Not numbered on the diagram — assemblies, kits and options
— 0000 930 2242 Webbing 38 mm x 5 m / 1.5x197'' not illustratedoption 1
— 0000 930 2241 Webbing 25 mm x 10 m / 1'' x 33' not illustratedoption 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · FR 108

FR 108: head-specific nylon line and Polycut blades

Orange 0.095 in fits the seven listed heads; red 0.105 in is limited to Fixed Line Head and Polycut 40-3.

  • Orange 0.095 in line applies to Supercut 2-2/20-2, Autocut 25-2/30-2, Polymatic 30-2, Fixed Line Head and Polycut 40-3. Packages:50 ft=0000 930 2587;1/2 lb=0000 930 2582;1 lb=0000 930 2579;3 lb=0000 930 2246;5 lb=0000 930 2247.
  • Red 0.105 in line applies ONLY to the listed Fixed Line Head and Polycut 40-3:35 ft=0000 930 2586;1 lb=0000 930 2578. Do not extend that row to the other five heads. Lengths/weights are supplied package sizes, not installed cutting-line lengths or machine quantities.
  • Thermoplastic blades for Polycut 40-3 are set 4111 007 1001 of 12 blades. Twelve is the supply-set count, not 12 simultaneously installed blades. Deflector/skirt and line-limiting requirements still apply to the actual cutting-head configuration.
  • Historical TI 04/1995 guidance for the FR 108, series 4135; no serial cutoff is printed. Historical approvals and specifications are not a current compatibility approval or independently measured performance. Exact-model IPL links are navigation, not permission to apply these values to an unidentified later configuration. No hardware operation was performed.

Source: TI 4/1995, p. 2 · TI 4/1995, p. 6 — head-specific nylon line and Polycut blades.

Part numbers (8)
  • 0000 930 2587 — Orange 0.095 in line;50 fthistorical head-specific consumable · FR 108; TI 04/1995 conditions
  • 0000 930 2582 — Orange 0.095 in line;1/2 lbhistorical head-specific consumable · FR 108; TI 04/1995 conditions
  • 0000 930 2579 — Orange 0.095 in line;1 lbhistorical head-specific consumable · FR 108; TI 04/1995 conditions
  • 0000 930 2246 — Orange 0.095 in line;3 lbhistorical head-specific consumable · FR 108; TI 04/1995 conditions
  • 0000 930 2247 — Orange 0.095 in line;5 lbhistorical head-specific consumable · FR 108; TI 04/1995 conditions
  • 0000 930 2586 — Red 0.105 in line;35 fthistorical head-specific consumable · FR 108; TI 04/1995 conditions
  • 0000 930 2578 — Red 0.105 in line;1 lbhistorical head-specific consumable · FR 108; TI 04/1995 conditions
  • 4111 007 1001 — Polycut 40-3 thermoplastic blades;set 12historical head-specific consumable · FR 108; TI 04/1995 conditions

Service note · FR 108

FR 108: tool-specific sharpening aids

5.5 mm round file belongs to the chisel-tooth circular saw blade 200, not every metal cutting tool.

  • File holder 5605 750 4343 includes round file 0811 411 8108, diameter 5.5 mm, for circular saw blade 200 CHISEL TOOTH. Do not apply that filing specification to scratcher-tooth blade 200 or brush knife.
  • Sharpening template 0457 342 2629 is for brush knife 250. STIHL balancer 5910 850 2600 is described as universal in this sharpening-aid table; that wording is not a universal cutting-tool fitment approval. The page does not provide filing angles or a full sharpening procedure.
  • Historical TI 04/1995 guidance for the FR 108, series 4135; no serial cutoff is printed. Historical approvals and specifications are not a current compatibility approval or independently measured performance. Exact-model IPL links are navigation, not permission to apply these values to an unidentified later configuration. No hardware operation was performed.

Source: TI 4/1995, p. 6 — tool-specific sharpening aids.

Part numbers (4)
  • 5605 750 4343 — File holderincludes 5.5 mm round file; chisel-tooth 200 · FR 108; TI 04/1995 conditions
  • 0811 411 8108 — Round file 5.5 mmincluded with holder; chisel-tooth 200 · FR 108; TI 04/1995 conditions
  • 0457 342 2629 — Sharpening templatebrush knife 250 · FR 108; TI 04/1995 conditions
  • 5910 850 2600 — STIHL balanceruniversal within listed sharpening context · FR 108; TI 04/1995 conditions

Wrong number or missing part for the FR 108? Report a correction →