← FR 125, FR 135, FR 145 · FS 108 · FR 108

Stihl 4135 · Section U · 20 of 20 · 14 parts

Cutting tools, Tools

Fits FR 125, FR 135, FR 145.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111223456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (14)

PosPart numberDescriptionQty
1 4001 713 3801 Grass cutting blade 230-4 / 9''-4 Fitment / change note → 1
2 0000 967 3706 Warning pictogram 1
3 4001 713 3805 Grass cutting blade 230-2 / 9''-2 Fitment / change note → 1
4 0000 967 3730 Warning pictogram 1
5 4135 713 4570 Deflector 1
6 4135 718 7270 Bar 1
7 4135 718 7271 Bar 1
8 9022 341 1270 Spline screw IS-M6x14 2
9 4128 890 3400 Combination wrench 1
10 0812 260 1007 Allen key 4x25x70 1
11 0000 884 0307 Safety glasses 1
12 0000 890 2300 NLA Screwdriver option 1
Not numbered on the diagram — assemblies, kits and options
— 4135 710 8170 Deflector 1
— 4113 710 8170 Deflector 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · FR 125 / FR 135 / FR 145

FR 125 / FR 135 / FR 145: approved blades and sharpening files

230-2 and 230-4 are replacement-only entries; the unnumbered 265-2 is for production.

  • Section 3 approves STIHL cutting blade 230-2, 4001 713 3805, and 230-4, 4001 713 3801, each explicitly replacement only. STIHL cutting blade 265-2 is for production and has no printed part number. Do not invent that number or extend replacement-only to the production entry.
  • Section 4.1 lists two flat sharpening files, 0814 252 3356 and 0814 412 3310; each is for cutting blades 230-2, 230-4 and 265-2. The TI does not state that one file replaces the other, or supply file dimensions, filing angles or sharpening instructions.
  • The retained cutting-tools sheet U includes the exact 230-2 and 230-4 numbers. The 265-2 has no corresponding numbered row established here; it remains a historical unnumbered approval, not an invented drawing position. Mounting hardware, deflector selection and complete operating combinations are not specified by this TI.
  • Replacement-only and production describe the 1999 source supply roles, not present availability. The listing is limited to the three named models and is not a general blade approval for other brushcutters.
  • Historical TI15/1999 names FR 125, FR 135 and FR 145 and series 4126, 4135, 4113. The retained exact-model IPL groups these machines under 4135; that navigation grouping is not a series-equivalence or parts-interchange claim. No serial cutoff or later-model applicability is supplied.

Source: TI 15/1999, p. 1 · TI 15/1999, p. 2 · TI 15/1999, p. 3 · TI 15/1999, p. 4 — All four original pages; contents and figures, sections 1–6, complete specification and accessory tables, repair dependencies and colophons.

Part numbers (4)
  • 4001 713 3805 — STIHL cutting blade 230-2Approved; replacement only · FR 125 / FR 135 / FR 145; TI15/1999 accessory listing
  • 4001 713 3801 — STIHL cutting blade 230-4Approved; replacement only · FR 125 / FR 135 / FR 145; TI15/1999 accessory listing
  • 0814 252 3356 — Flat sharpening fileFor 230-2, 230-4 and 265-2 blades · FR 125 / FR 135 / FR 145; TI15/1999 accessory listing
  • 0814 412 3310 — Flat sharpening fileFor 230-2, 230-4 and 265-2 blades · FR 125 / FR 135 / FR 145; TI15/1999 accessory listing

Wrong number or missing part for the FR 125, FR 135, FR 145? Report a correction →