← FR 125, FR 135, FR 145 · FS 108 · FR 108

Stihl 4135 · Section O · 14 of 14 · 23 parts

Tools, Extras

Fits FS 108.

Parts diagrams →

Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
11010111213131414151516171819220213456788889
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (23)

PosPart numberDescriptionQty
1 4128 890 3400 Combination wrench 1
2 4130 893 7800 Locking pin 1
3 0000 890 2300 NLA Screwdriver 1
4 4119 710 9001 Full harness Fitment / change note → 1
5 4119 710 6306 Backplate with strap 1
6 not sold separately Strap 38x780mm / 1.5x30.7'' not available as a separate item 1
7 not sold separately Strap 25 mm x 1.18 m / 1x46.5'' not available as a separate item 1
8 4203 792 7200 Slide 3
9 4119 718 6300 Slide 1
10 4119 718 6310 Slide 2
11 4119 710 6406 Buckle with strap 1
12 4119 718 7400 Guard plate 1
13 4119 710 6906 Spring safety hook 1
14 9408 021 4530 Rivet shank 4x8x6
15 9409 021 4420 Rivet head 4x8
16 4119 710 9012 Harness 1
17 not sold separately Strap 25 mm x 1.86 m / 1x73'' not available as a separate item 1
18 4119 718 6320 NLA Slide 1
19 0000 884 0307 Safety glasses 1
20 0000 891 0801 NLA Tool roll option 1
21 0783 830 2000 Tube of sealant Dirko HT red option 1
Not numbered on the diagram — assemblies, kits and options
— 0000 930 2242 Webbing 38 mm x 5 m / 1.5x197'' not illustratedoption 1
— 0000 930 2241 Webbing 25 mm x 10 m / 1'' x 33' not illustratedoption 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · FS 88 / FS 108

FS 88 / 108: sharpening aids by tool type

Scratcher-tooth and chisel-tooth saw blades use different listed aids.

  • Flat file 0814 212 3310: cutting blades 230-4 / 230-8, brush knife 250 and circular saw 200 SCRATCHER tooth. File holder 5605 750 4343 INCLUDING 5.5 mm round file 0811 411 8108: circular saw 200 CHISEL tooth.
  • Sharpening template 0457 342 2629: brush knife 250. STIHL balancer 5910 850 2600: universal application as printed. No filing angle, blade wear limit or sharpening procedure given. These aids do not override the loop-handle metal-tool prohibition.
  • Historical TI 37/1994 source guidance, not present-day approval, current stock or a physical interchange test. No serial cutoff is supplied. Exact-model catalog links are navigation, not proof that later service parts or carburetor variants equal the original configuration. No hardware operation was performed.

Source: TI 37/1994, p. 2 · TI 37/1994, p. 6 — FS 88 / 108: sharpening aids by tool type.

Part numbers (5)
  • 0814 212 3310 — Flat sharpening filehistorical listed item · FS 88 / 108: sharpening aids by tool type
  • 5605 750 4343 — File holder including 5.5 mm round filehistorical listed item · FS 88 / 108: sharpening aids by tool type
  • 0811 411 8108 — Included 5.5 mm round filehistorical listed item · FS 88 / 108: sharpening aids by tool type
  • 0457 342 2629 — Brush knife sharpening templatehistorical listed item · FS 88 / 108: sharpening aids by tool type
  • 5910 850 2600 — STIHL balancerhistorical listed item · FS 88 / 108: sharpening aids by tool type

Service note · FS 88 / FS 108

FS 88 / 108: harnesses and transport guards

The blade/brush-knife transport guard differs from the circular-saw guard.

  • Safety goggles depend on market; no universal number printed. Shoulder strap 4119 710 9010; full harness 4119 710 9001; full harness L 4108 710 9001. No size conversion or permission to omit protection supplied.
  • Transport guard 4119 790 3906: cutting blades 230-4 / 230-8 and brush knife 250-3. Guard 4119 790 3901: circular saw 200, scratcher OR chisel tooth. Transport protection is not an operating deflector or permission for metal tools on loop-handle machines.
  • Historical TI 37/1994 source guidance, not present-day approval, current stock or a physical interchange test. No serial cutoff is supplied. Exact-model catalog links are navigation, not proof that later service parts or carburetor variants equal the original configuration. No hardware operation was performed.

Source: TI 37/1994, p. 6 · TI 37/1994, p. 7 — FS 88 / 108: harnesses and transport guards.

Part numbers (5)
  • 4119 710 9010 — Shoulder straphistorical listed item · FS 88 / 108: harnesses and transport guards
  • 4119 710 9001 — Full harnesshistorical listed item · FS 88 / 108: harnesses and transport guards
  • 4108 710 9001 — Full harness Lhistorical listed item · FS 88 / 108: harnesses and transport guards
  • 4119 790 3906 — Transport guard for cutting blades and brush knifehistorical listed item · FS 88 / 108: harnesses and transport guards
  • 4119 790 3901 — Transport guard for both circular-saw tooth formshistorical listed item · FS 88 / 108: harnesses and transport guards

Wrong number or missing part for the FS 108? Report a correction →