Stihl 4137 · Section Y · 23 of 24 · 20 parts
Tools, Full harness
Fits HT 70, HT 75.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (20)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1129 890 3401 | Combination wrench | 1 |
| 2 | 0000 890 2300 NLA | Screwdriver | 1 |
| 3 | 0000 890 2305 | Screwdriver | 1 |
| 4 | 0000 891 0801 NLA | Tool roll option | 1 |
| 5 | 0000 792 9128 | Chain scabbard | 1 |
| 6 | 0000 884 0307 | Safety glasses | 1 |
| 7 | 4130 710 9000 | Harness | 1 |
| 8 | 4134 710 9004 NLA | Full harness no longer available from factory | 1 |
| 9 | 4134 710 6401 NLA | Buckle | 1 |
| 10 | not sold separately | Strap 38x200 mm / 1.5x7.9'' not available as a separate item | 1 |
| 11 | 4134 718 6300 NLA | Slide | 1 |
| 12 | 4203 792 7200 | Slide | 3 |
| 13 | not sold separately | Strap 25x220 mm / 1x8.7'' not available as a separate item | 1 |
| 14 | not sold separately | Strap 38x80 mm / 1.5x3.1'' not available as a separate item | 1 |
| 15 | 4138 790 2802 | Basket no longer available from factory | 1 |
| 16 | 4138 710 6400 NLA | Buckle | 1 |
| 17 | 4138 718 6400 NLA | Pad | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 4138 710 9001 | Full harness HT no longer available from factory | 1 |
| — | 0000 930 2242 | Webbing 38 mm x 5 m / 1.5x197'' not illustratedoption | 1 |
| — | 0000 930 2241 | Webbing 25 mm x 10 m / 1'' x 33' not illustratedoption | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · HT 70
HT 70: chain sharpening accessories
File holder 5605 750 4327 includes a 4 mm round file; filing gauge 0000 893 4000 is separately listed.
- File holder 5605 750 4327 is listed for sharpening the chain and INCLUDES a round file of diameter 4 mm (5/32 inch). The separate filing gauge is 0000 893 4000.
- No sharpening angle, depth-gauge setting, replacement round-file order number or present-day substitute is given in this table. Do not infer universal chain applicability or kit inclusion of the separately listed filing gauge.
- Historical HT 70 only. TI35/1998 calls this series 4138; the retained exact-model IPL is filed under 4137. That navigation association does not establish series equivalence, extend these assertions to HT 75 or later variants, or prove physical interchange. No production serial or current stock claim is supplied. No hardware operation was performed.
Source: TI 35/1998, p. 3 — Section 4 complete including table and inclusion.
Part numbers (2)
- 5605 750 4327 — File holder including 4 mm (5/32 inch) round fileHistorical sharpening accessory · HT 70; TI35/1998 section 4; introductory chain
- 0000 893 4000 — Filing gaugeSeparately listed sharpening accessory · HT 70; TI35/1998 section 4; not stated to be included with file holder
Wrong number or missing part for the HT 70, HT 75? Report a correction →