Stihl 4140 · Section F · 6 of 15 · 16 parts
Engine housing
Fits FC 55.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (16)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4140 020 3000 | Engine housing | 1 |
| 2 | 4140 080 1602 | Shroud | 1 |
| 3 | 4140 084 8300 NLA | Reflector foil | 1 |
| 4 | 9075 478 4159 | Pan head self-tapping screw IS-D5x24 Fitment / change note → | 4 |
| 5 | 4140 180 1105 | Throttle cable | 1 |
| 6 | 4140 180 1100 | Throttle cable | 1 |
| 7 | 4140 440 1900 | Lead | 2 |
| 8 | 4229 430 0203 | Stop switch | 1 |
| 9 | 4140 180 1500 | Throttle trigger | 1 |
| 10 | 4140 182 4500 | Torsion spring | 1 |
| 11 | 4140 791 5400 | Support | 1 |
| 12 | 4140 182 0800 | Lockout lever | 1 |
| 13 | 4140 182 4505 | Torsion spring | 1 |
| 14 | 9075 478 4155 | Pan head self-tapping screw IS-D5x24 | 7 |
| 15 | 9075 478 4115 | Pan head self-tapping screw IS-D5x16 | 1 |
| 16 | 4140 182 3300 NLA | Insulating hose | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Conditional replacement · HL 45 / FC 55 / FS 55 / FS 45
HL 45, FC 55, FS 45/55: complete replacement fuel tank
New tank includes the changed hose, pickup and longer retainer; old retainer hardware remains for older repairs.
- Only the named HL 45, FC 55, FS 55 and FS 45 configurations are covered. Shared IPL sheets do not extend this note to FS 38/46 or unnamed C/L/R/RC/T variants. The HL 45 header says series 4232; 4140 powerhead navigation is not a series-equivalence claim.
- With the carburetor update, tank shape improves screw access and capacity changes from 10 oz (0.3 liter) to 11 oz (0.33 liter), as printed. A new retainer is approximately 3/8 inch (10 mm) longer, secured with IS P5x20 instead of IS D5x24; the fuel hose is modified and standardized for all named machines.
- Complete replacement tank 4232 350 0401 is supplied for all named models with hose 4140 358 7702, pickup body 0000 350 3506, retainer 4140 353 2402 and mounting screw 9074 478 4135. Previous tank 4140 350 0400 for FS45/55 and FC55, tank 4232 350 0400 for HL45, and hose 4140 358 7700 are deleted.
- Previous pickup 0000 350 3502, retainer 4140 353 2400 and IS D5x24 screw 9075 478 4159 remain for older machines/other models. The new IS P5x20 screw and longer retainer are part of the new tank arrangement, not unrestricted hardware substitutes.
- Introduction of the overall model update is in progress, not a dated universal serial cutoff. Availability is historical 2001 factory supply, not current stock. No hardware fitment or operation was tested.
Source: TI 27/2001, p. 6 · TI 27/2001, p. 7 · TI 27/2001, p. 8 — Section2.6, component diagrams and summary rows17–24/remarks1,6.
Part numbers (11)
- 4140 350 0400 — Fuel tank FS45/55 FC55Previous; deleted · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
- 4232 350 0400 — Fuel tank HL45Previous; deleted · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
- 4232 350 0401 — Complete replacement fuel tankNew; named models · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
- 4140 358 7700 — Fuel hosePrevious; deleted · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
- 4140 358 7702 — Fuel hoseNew · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
- 0000 350 3502 — Pickup bodyPrevious; retained · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
- 0000 350 3506 — Pickup bodyNew · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
- 4140 353 2400 — RetainerPrevious; retained · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
- 4140 353 2402 — Longer retainerNew · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
- 9075 478 4159 — IS D5x24 spline screwPrevious; retained · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
- 9074 478 4135 — IS P5x20 spline screwNew · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
Wrong number or missing part for the FC 55? Report a correction →