Stihl 4140 · Section C · 3 of 28 · 18 parts
Rewind starter
Fits FS 55, FS 55 C, FS 55 R, FS 55 RC, FS 55 T.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (18)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4140 190 4009 | Rewind starter | 1 |
| 2 | 4140 190 0601 | Rewind spring Fitment / change note → | 1 |
| 3 | 4128 195 0400 | Rope rotor | 1 |
| 4 | 0000 958 0923 | Washer | 1 |
| 5 | 1118 195 3500 | Spring | 1 |
| 6 | 4116 195 7200 | Pawl | 1 |
| 7 | 4140 195 3400 | Starter grip | 1 |
| 8 | 0000 190 3404 | Starter grip ElastoStart Ø 3 mm option | 1 |
| 9 | 1120 195 8200 | Starter rope Ø 3x1060 mm Fitment / change note → | 1 |
| 10 | 0000 195 7000 | Cap option | 1 |
| 11 | 0000 195 8200 | Starter rope Ø 3x800 mm Fitment / change note → | 1 |
| 12 | 4140 967 1501 | Model plate FS 55 | 1 |
| 13 | 4140 967 1529 | Model plate FS 55 R | 1 |
| 14 | 4140 967 1505 | Model plate FS 55 T | 1 |
| 15 | 4140 967 1509 | Model plate FS 55 TC | 1 |
| 16 | 0000 951 1100 | Screw IS-D5x20 | 3 |
| 17 | 4140 084 6801 | Spacer | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 0000 930 2208 NLA | Starter rope Ø 3 mm x 30.5 m not illustratedoption | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Conditional replacement · HL 45 / FC 55 / FS 55 / FS 45
HL 45, FC 55, FS 45/55: paired starter rope and spring
Longer rope requires the new spring; the source disagrees on its inch length.
- Only the named HL 45, FC 55, FS 55 and FS 45 configurations are covered. Shared IPL sheets do not extend this note to FS 38/46 or unnamed C/L/R/RC/T variants. The HL 45 header says series 4232; 4140 powerhead navigation is not a series-equivalence claim.
- Rewind starter 4140 190 4000 keeps its part number but changes construction with the carburetor update. New rope 1120 195 8200 is diameter 3 x 1060 mm and new rewind spring is 4140 190 0601, increasing pull length. The drawing shows old/new replacement springs in transport keepers.
- The longer rope may only be installed together with the new rewind spring. Old rope 0000 195 8200 (diameter 3 x 800 mm, 31 1/2 inches) and old spring 4140 190 0600 remain for repairs to older machines. The old complete starter version is deleted despite the unchanged assembly number.
- Unresolved source conflict: page7 prints 41 3/8 inches for the new 1060 mm rope; page8 prints 41 3/4 inches for the same rope. Both retain the same metric length and part number. Neither inch value is silently normalized or selected as authoritative.
- The TI identifies the new carburetor as an easy indicator of machines with the new rope and spring. This is a historical production cue, not proof of an unmodified present-day machine or a blanket retrofit instruction.
- Introduction of the overall model update is in progress, not a dated universal serial cutoff. Availability is historical 2001 factory supply, not current stock. No hardware fitment or operation was tested.
Source: TI 27/2001, p. 7 · TI 27/2001, p. 8 — Section2.8, spring/keeper drawing and summary rows28–31/remarks1,6.
Part numbers (5)
- 4140 190 4000 — Rewind starterSame number, changed version · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
- 1120 195 8200 — 3 x 1060 mm starter ropeNew; conflicting inch lengths · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
- 4140 190 0601 — Rewind springRequired with longer rope · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
- 0000 195 8200 — 3 x 800 mm starter ropePrevious; retained · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
- 4140 190 0600 — Rewind springPrevious; retained · HL 45, FC 55, FS 55, FS 45; source configuration restrictions apply
Wrong number or missing part for the FS 55, FS 55 C, FS 55 R, FS 55 RC, FS 55 T? Report a correction →