Stihl 4140 · Section F · 6 of 19 · 11 parts
Ignition system, Clutch
Fits KM 55, KM 55 C, KM 55 R, KM 55 RC.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (11)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4140 400 1200 | Flywheel | 1 |
| 2 | 4140 162 8900 | Washer | 1 |
| 3 | 4140 162 9101 | Spacer sleeve | 1 |
| 4 | 4140 160 2005 | Clutch | 1 |
| 5 | 4140 162 7901 | Tension spring | 2 |
| 6 | not sold separately | Cup spring 31.7x20.4x0.4 not available as a separate item | 1 |
| 7 | 4140 160 2903 | Clutch drum Fitment / change note → | 1 |
| 8 | 4140 400 1308 | Ignition module | 1 |
| 9 | 4140 400 1305 | Ignition module | 1 |
| 10 | 4140 431 2100 | Connector tag | 1 |
| 11 | 9075 478 3023 | Pan head self-tapping screw IS-D4x22 | 2 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Conditional replacement · HL 45 / FC 55 / FS 45 / FS 55 / KM 55
FC 55, FS 45/55, KM 55: revised clutch drum; HL 45 excluded
HL 45 retains its previous drum in all versions; the other named models receive the revision.
- Only the named HL 45, FC 55, FS 45, FS 55 and KM 55 configurations are covered, with the section-specific HL 45 exclusion below where stated. Shared IPL sheets do not extend this note to FS 38/46 or unnamed C/L/R/RC/T variants. HL 45 is headed series 4232; navigation through 4140 powerhead sheets is not series equivalence.
- For FC 55, FS 45, FS 55 and KM 55, clutch drum 4140 160 2901 is replaced by 4140 160 2903 to optimize clutch operation. Previous drum 4140 160 2901 remains available as a spare.
- The change explicitly excludes HL 45: 4140 160 2901 continues to be installed in all HL 45 versions. The HL 45 navigation target exists to display this exclusion, not to authorize 4140 160 2903 on that machine.
- Introduction is in progress, with no numerical serial cutoff. Factory availability is the historical 2002 statement, not current stock. Later IPL numbers do not overwrite historical numbers or prove unrestricted interchangeability. No hardware operation or fitment was tested.
Source: TI 36/2002, p. 2 · TI 36/2002, p. 3 — Section3 and summary row11/remarks2,4.
Part numbers (2)
- 4140 160 2901 — Clutch drumPrevious; retained for all HL45 versions and as spare · Named models only; section-specific restrictions apply
- 4140 160 2903 — Clutch drumNew; not HL45 · Named models only; section-specific restrictions apply
Wrong number or missing part for the KM 55, KM 55 C, KM 55 R, KM 55 RC? Report a correction →