← Brushcutters & other equipment · series 4144

Stihl 4144 · Section E · 5 of 12 · 18 parts

Ignition system, Clutch

Fits FS 40, FS 40 C, FS 50, FS 50 C.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131415161718234556789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (18)

PosPart numberDescriptionQty
1 4144 400 1314 Ignition module 1
2 4144 400 1316 Ignition module 1
3 4144 442 0401 Insulating hose 1
4 0000 998 0618 Torsion spring 1
5 4144 448 1200 Lead retainer 2
6 4144 405 1000 Spark plug boot 1
7 4144 405 8101 Protective cap 1
8 4144 442 0400 Insulating hose 1
9 4144 405 8100 Protective cap 1
10 4241 405 8000 Insulator 1
11 9291 021 0100 Washer 4.3 2
12 9075 478 3018 Pan head self-tapping screw IS-D4x18 2
13 4144 400 1202 Flywheel 1
14 4140 160 2005 Clutch 1
15 4140 162 7901 Tension spring 2
16 not sold separately Cup spring 31.7x20.4x0.4 not available as a separate item 1
17 4140 162 8900 Washer 1
18 4144 160 2900 Clutch drum 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · FS 36 / FS 40 / FS 44 / FC 44

FS 36 / FS 40 / FS 44 / FC 44: series 4130 replacement ignition assignment

4130 400 1300 with flywheel 4130 400 1250; ignition lead not replaceable.

  • Printed series 4130. Use 4130 400 1300 with flywheel 4130 400 1250.
  • The asterisk means ignition lead not replaceable; it is not a zero or unspecified cut length.
  • TI01/1999 lists replacement combinations for the then-current machines, not every earlier configuration. Older machines are referred to Spare Parts for Previous Models in their own illustrated parts lists; no serial cutoff is supplied here.
  • Use only the listed ignition-module/flywheel combinations. The source warns that incorrect combinations can cause excessive RPM or running in reverse; sharing a module number does not make all flywheels interchangeable.
  • Universal replacement modules may differ from production modules in maker, shape and part number. The source describes installation/function compatibility within its assignments, not universal compatibility or a project hardware test.
  • Some replacement modules require shortening the ignition lead and/or short-circuit wire and crimping a different short-circuit connector. The table gives ignition-lead lengths only; it supplies neither a short-circuit-wire length nor a connector part number. Do not infer that every row needs modification.
  • Only the named models and printed series are covered. A shared IPL sheet does not extend this assignment to unnamed models or modern MS equivalents. This 1999 USA bulletin is historical guidance, not current availability.
  • The bulletin prints series 4130; the retained exact-model ignition sheets are cataloged under 4130, 4144. This link is an exact model-label navigation aid, not proof that the printed series identifiers are equivalent. Verify the actual machine configuration.

Source: TI 1/1999, p. 1 · TI 1/1999, p. 3 — 1.1 general restrictions and 1.2.2 power-tool assignments.

Part numbers (2)
  • 4130 400 1300 — Replacement ignition moduleAssigned component · FS 36 / FS 40 / FS 44 / FC 44, printed series 4130, listed combination only
  • 4130 400 1250 — Assigned flywheelRequired pairing · FS 36 / FS 40 / FS 44 / FC 44, printed series 4130

Wrong number or missing part for the FS 40, FS 40 C, FS 50, FS 50 C? Report a correction →