Stihl 4201 · Section E · 5 of 20 · 17 parts
Carburetor, Adapter
Fits TS 350 AVE, TS 360.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (17)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4308 120 0600 | Carburetor LA-S168 | 1 |
| 2 | not sold separately | Carburetor HL-327D no longer available from factory | 1 |
| 3 | 1106 121 8701 | Bushing | 2 |
| 4 | 1108 129 1102 | Gasket | 1 |
| 5 | 9022 313 0740 | Spline screw IS-M4x25 | 4 |
| 6 | 1108 120 2300 | Spacer flange | 1 |
| 7 | 9008 319 1350 | Hexagon head screw M6x25 | 2 |
| 8 | 1108 129 1110 | Gasket | 2 |
| 9 | 1108 121 2200 | Cooling plate | 1 |
| 10 | 9220 260 0900 | Hexagon nut M6 | 2 |
| 11 | 4201 122 6500 | Hose | 1 |
| 12 | 4201 141 1900 | Adapter | 1 |
| 13 | 9022 341 1270 | Spline screw IS-M6x14 | 2 |
| 14 | 1111 430 0210 | Stop switch | 1 |
| 15 | 4201 967 3500 | Plate | 1 |
| 16 | 9211 260 1430 | Hexagon nut M12x0.75 | 1 |
| 17 | 4201 121 6600 | Choke lever | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · TS 360
TS 360: discontinued ZAMA LA S7 replaced by Tillotson
Complete ZAMA carburetor supply ends; its component spares remain available.
- TS 360 alternative-production ZAMA LA S7 4201 120 0603 is no longer installed or factory-supplied complete. Only Tillotson 4201 120 0601 is now installed on the production line and supplied as replacement for this model. Do not swap the separate TS 350 and TS 360 replacement numbers.
- Component parts of the ZAMA carburetors REMAIN available as spares. The prose says installation stopped some time ago, while the summary says in progress; no numeric introduction cutoff is provided. The bulletin points to the parts list for the equivalent Tillotson and supplies no tuning or internal-parts interchange procedure. Canonical sheet names do not establish the precise Tillotson variant suffix used in 1994.
- Historical TI09/1994 guidance for the named TS 350 / TS 360 models only; no successor or TS 350 AVE applicability inferred from a shared IPL sheet. Across-flats dimensions describe wrench sizes, not thread diameters. Factory stock statements are historical, not current availability. MOQ columns are commercial order quantities. No physical interchange test was performed.
Source: TI 9/1994, p. 6 — TS 360: discontinued ZAMA LA S7 replaced by Tillotson.
Part numbers (2)
- 4201 120 0603 — ZAMA LA S7 complete carburetororiginal; no longer supplied · TS 360: discontinued ZAMA LA S7 replaced by Tillotson
- 4201 120 0601 — Tillotson replacement carburetormodel-specific replacement · TS 360: discontinued ZAMA LA S7 replaced by Tillotson
Wrong number or missing part for the TS 350 AVE, TS 360? Report a correction →