Stihl 4223 · Section T · 19 of 22 · 29 parts
Water tank
Fits TS 400.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (29)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4201 701 0800 | Water tank option | 1 |
| 2 | 4201 700 6250 | Valve option | 1 |
| 3 | 9645 948 0340 | O-ring 6x1.5 option | 1 |
| 4 | not sold separately | Valve optionnot available as a separate item | 1 |
| 5 | 9636 965 1960 | Sealing ring 18x24 option | 1 |
| 6 | 9208 260 1660 | Hexagon nut M16 option | 1 |
| 7 | 9645 945 1390 | O-ring 14x2.5 option | 1 |
| 8 | 4201 708 9600 | Connector option | 1 |
| 9 | 9307 021 0200 | Washer 10.5 option | 1 |
| 10 | 9486 648 1195 | Cup spring 23x10.2x1.25 option | 1 |
| 11 | 4201 700 7400 | Bracket option | 1 |
| 12 | 4201 703 2800 | Plug option | 2 |
| 13 | 9380 620 2700 | Roll pin 5x30 option | 2 |
| 14 | 4201 708 8405 | Hexagon head screw M10x70 option | 1 |
| 15 | 4201 678 1114 | Hose 545 mm / 21 1/2'' option | 1 |
| 16 | 4201 677 7400 | Hose connector option | 1 |
| 17 | 4202 701 0900 | Container cap option | 1 |
| 18 | 4202 709 2000 | Sealing ring option | 1 |
| 19 | 4202 700 8805 | Strainer option | 1 |
| 20 | not sold separately | Plug optionno longer available from factory | 1 |
| 40 | 9210 260 1300 | Hexagon nut M10 option | 1 |
| 41 | 4201 678 1107 | Hose 835 mm / 32 7/8'' option | 1 |
| 42 | 4201 677 1007 | Union option | 1 |
| 43 | 4201 677 1008 | Elbow union 1/8" option | 1 |
| 44 | 4201 678 1111 | Hose 195 mm / 7 1/2'' option | 1 |
| 45 | 4201 708 8400 | Banjo bolt option | 2 |
| 46 | 9211 021 8900 | Hexagon nut G 1/8" option | 2 |
| 47 | 9041 216 0950 | Pan head screw M5x10 option | 2 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 4201 007 1048 | Water tank mounting kit Fitment / change note → option | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · TS 400
TS 400 Cutquik cart: separate mounting kit required
4223 007 1000 is required and must be ordered separately from the cart.
- Existing special accessories can be used with TS 400: Cutquik cart with mudguard 4201 710 1403, cutting-depth-limiter kit 4201 007 1049, water-tank attachment kit 4201 007 1048 and pressurized-water-tank kit 4201 007 1037.
- Mounting kit 4223 007 1000 is REQUIRED to secure TS 400 on the Cutquik cart. It is NOT INCLUDED WITH THE CART and MUST BE ORDERED SEPARATELY. Do not present a bare cart purchase as a complete TS 400 attachment kit.
- The summary table is a roster of separate accessories, not contents of one kit. No tank capacity, pressure setting, later FW 20-cart compatibility or unconditional interchange with later mounting kits is printed.
- Historical TI guidance for the source-era named models only; no future-model compatibility or current stock guarantee. No hardware operation was performed.
Source: TI 37/1995, p. 6 — TS 400 Cutquik cart: separate mounting kit required.
Part numbers (5)
- 4201 710 1403 — Cutquik cart with mudguardexisting accessory · TS 400; TS 400 Cutquik cart: separate mounting kit required
- 4223 007 1000 — TS400 cart mounting kitrequired; ordered separately · TS 400; TS 400 Cutquik cart: separate mounting kit required
- 4201 007 1049 — Cutting depth limiter kitexisting accessory · TS 400; TS 400 Cutquik cart: separate mounting kit required
- 4201 007 1048 — Water tank attachment kitexisting accessory · TS 400; TS 400 Cutquik cart: separate mounting kit required
- 4201 007 1037 — Pressurized water tank kitexisting accessory · TS 400; TS 400 Cutquik cart: separate mounting kit required
Wrong number or missing part for the TS 400? Report a correction →