Stihl 4228 · Section J · 9 of 10 · 24 parts
Gear head, Handlebar with hand guard
Fits HS 45.
Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.
Parts (24)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4228 640 0501 | Gear housing | 1 |
| 2 | 4228 642 9700 | Bushing | 2 |
| 3 | 9503 003 5290 | Grooved ball bearing 6002-2RS | 1 |
| 4 | 9456 621 3600 | Circlip 32x1.2 | 1 |
| 5 | 9381 651 2640 | Cylindrical pin 5x24 | 1 |
| 6 | 4119 713 6500 | Screw plug | 1 |
| 7 | 9455 621 1380 | Circlip 14x1 | 1 |
| 8 | 4228 162 5000 | Lever | 1 |
| 9 | 4228 162 7900 | Tension spring | 1 |
| 10 | 4228 162 5400 | Brake band | 1 |
| 11 | 4228 162 5005 | Lever | 1 |
| 12 | 4228 160 2901 | Clutch drum | 1 |
| 13 | 9075 478 4159 | Pan head self-tapping screw IS-D5x24 | 3 |
| 14 | 4228 649 0302 | Gasket Fitment / change note → | 1 |
| 15 | 4228 641 0400 | Gearbox cover | 1 |
| 16 | 4228 649 0301 | Gasket | 1 |
| 17 | 9075 478 4085 | Pan head self-tapping screw IS-D5x18 | 6 |
| 18 | 4228 791 0101 | Handlebar with hand guard Fitment / change note → | 1 |
| 19 | 4203 708 0800 | Spring | 2 |
| 20 | 9074 478 4545 | Pan head self-tapping screw IS-P6x26.5 | 2 |
| 21 | 0000 951 1100 | Screw IS-D5x20 | 3 |
| 22 | 0781 120 1109 | Gear lubricant 80 g option | 1 |
| 23 | 0000 967 3541 NLA | Instruction label | 1 |
| 24 | 0000 967 3501 | Instruction label | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Conditional replacement · HS 45
HS 45 gearbox gasket: increased thickness
The gearbox-cover gasket changes from 0.5 to 0.75 mm; the printed introduction applies only to USA production.
- Gasket 4228 649 0300 (0.5 mm) between gearbox and cover is replaced by 4228 649 0302 (0.75 mm). The drawing locates the gasket; no stacking or extra shimming procedure is specified.
- USA production: from serial number 2 51 134 557. This is a gasket introduction, not a global HS 45 model range or the cutoff for the later carburetor package. Previous gasket no longer available from factory.
- HS 45 only. Factory availability describes the 2001 bulletin, not present stock. No physical interchange or running adjustment was tested.
Source: TI 26/2001, p. 1 — Section 1, gearbox illustration and summary.
Part numbers (2)
- 4228 649 0300 — Gearbox-cover gasket, 0.5 mmPrevious · HS 45; configuration restrictions in this note
- 4228 649 0302 — Gearbox-cover gasket, 0.75 mmReplacement · HS 45; configuration restrictions in this note
Conditional replacement · HS 45
HS 45 reinforced handlebar with hand guard
The strengthened front handle and hand guard replace the earlier version with explicit full interchangeability.
- Handlebar (front handle) with hand guard 4228 791 0100 is replaced by fully interchangeable 4228 791 0101 to improve component strength. The previous version is no longer available from factory. No serial cutoff is supplied.
- HS 45 only. Factory availability describes the 2001 bulletin, not present stock. No physical interchange or running adjustment was tested.
Source: TI 26/2001, p. 2 — Section 2 and summary.
Part numbers (2)
- 4228 791 0100 — Handlebar with hand guardPrevious · HS 45; configuration restrictions in this note
- 4228 791 0101 — Reinforced handlebar with hand guardFully interchangeable replacement · HS 45; configuration restrictions in this note
Wrong number or missing part for the HS 45? Report a correction →