Stihl 4229 · Section R · 16 of 17 · 14 parts
Nozzle, Vacuum attachment
Fits SH 55, SH 85.
Historical fitment & changes (3) — includes parts and conditions not shown on this drawing.
Parts (14)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4229 708 6300 | Nozzle Fitment / change note → | 1 |
| 2 | 4229 708 6301 | Nozzle Fitment / change note → | 1 |
| 3 | 4241 708 6302 | Nozzle option | 1 |
| 4 | 4229 760 8200 | Tube | 1 |
| 5 | 4229 703 5600 | Screen | 1 |
| 6 | 4804 708 3500 | Suction tube | 1 |
| 7 | 4229 708 9702 | Catcher bag | 1 |
| 8 | 4229 708 9701 | Catcher bag option | 1 |
| 9 | 4227 710 9003 | Harness | 1 |
| 10 | 0000 791 8400 NLA | Ring option | 1 |
| 11 | 4229 700 6900 | Elbow | 1 |
| 12 | 4229 708 6100 | Ring | 1 |
| 13 | 0812 370 1000 | Screwdriver T27x120x70 | 1 |
| 14 | 0000 884 0307 | Safety glasses option | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Historical fitment · BG 55 / BG 65 / BG 85 / SH 55 / SH 85
BG/SH 55, 65, 85: vacuum attachment and restricted nozzle options
Vacuum kit is listed for BG 55/65/85; round nozzle for BG 65, fan nozzle for BG 55 and SH 55.
- Page 1 says SH 55 and SH 85 come standard with a vacuum attachment and blower tube; a shredder blade mounted on the fanwheel reduces the size of picked-up material. This does not identify the SH standard attachment as order number 4229 007 1000, whose accessory row explicitly names BG 55/65/85 only.
- Preserve the exact per-part model roster: the round nozzle row names only BG 65; the fan nozzle row only BG 55 and SH 55. Binding this note to both BG and SH nozzle sheets exposes the comparison, not blanket approval of every listed accessory on every model in the note.
- Later BG and SH sheets both list 4229 708 6300 and 4229 708 6301 generically as Nozzle at positions 1 and 2; those shared rows do not erase TI29’s round/fan descriptions or model restrictions. The later BG sheet retains unpositioned vacuum attachment 4229 007 1000; the SH sheet has individual components, without that kit row. No TI kit contents, assembly sequence or current configuration is inferred.
- The 1999 USA issue names BG 55, BG 65, BG 85, SH 55 and SH 85, series 4229. Shared later catalog sheets also include BG 45/46; this note does not extend TI accessory applicability to those models, BR 45 C or later variants. No serial threshold or present-stock claim is supplied.
- Catalog comparisons preserve the later rows unchanged. Different part numbers or dimensions alone do not establish supersession, interchangeability or a retrofit procedure. Remaining technical specifications and service/manual references are still under review; this note does not close the entire TI.
Source: TI 29/1999, p. 1 · TI 29/1999, p. 4 — Section 3 vacuum/nozzle accessories with page1 standard-equipment context.
Part numbers (3)
- 4229 007 1000 — Vacuum attachmentUser accessory · BG 55, BG 65, BG 85 only in section 3
- 4229 708 6300 — Round nozzleUser accessory · BG 65 only in section 3
- 4229 708 6301 — Fan nozzleUser accessory · BG 55 and SH 55 only in section 3
Service note · SH 55 / SH 85
BG/SH 55, 65, 85: later SH suction-tube bayonet coupling
SH suction-tube guide slots engage the stub lugs; opening the protective screen precedes refitting.
- Later component evidence: January 2005, not a contemporaneous 1999 instruction or proof of original equipment. The introduction covers BG 45/46/55/65/85 and SH 55/85; this TI29-linked note is limited to BG 55/65/85 and SH 55/85 and the explicitly stated component variants. Catalog assembly links are navigation, not proof that all revisions fit.
- Section 10.5, printed 36 / PDF37, is SH only; this TI-linked note is restricted to SH 55 and SH 85. Turn the suction tube counterclockwise as far as the stop (1/4 turn), then pull it off the stub. Unlike 10.4 and 10.6, this subsection does not prescribe lifting a blower-stub retaining tab with a screwdriver.
- To fit, open the protective screen, insert the suction tube so its guide slots engage the lugs on the stub, then rotate clockwise until the bayonet coupling engages. The arrows identify matching slots and lugs, not part numbers or dimensional compatibility. No star-nut operation is stated in this suction-tube procedure.
- No suction-tube size, replacement number, coupling torque or interchangeability with BG blower tubes or the SH elbow is established. The screen service is separately covered by 10.2; do not equate opening the screen for tube installation with removing the screen and torsion spring.
- The component manual requires the instruction manual safety precautions and applicable local regulations for any engine run. Fuel work is outdoors only, away from fire, flame, sparks or heat; wipe up spilled fuel immediately. These are source-reviewed reference notes, not a complete repair instruction or hardware verification. Exact owner-manual and remaining component dependencies stay open.
TI dependency: TI 29/1999, p. 5 — TI29 section5.3 component dependency; January2005 later SH suction-tube bayonet coupling.
Later manual evidence: STIHL Series 4140 Components BG, SH service manual (2005-01), section later SH suction-tube bayonet coupling, PDF pages 1, 3, 4, 36, 37
No parts-table entry added. Tool references, where present, are retained in the manual notes above.
Service note · SH 55 / SH 85
BG/SH 55, 65, 85: later SH elbow and sealing-ring wording conflict
SH elbow removal loosens the star nut; refitting checks the rubber ring, while a printed “blower tube” instruction remains a wording conflict.
- Later component evidence: January 2005, not a contemporaneous 1999 instruction or proof of original equipment. The introduction covers BG 45/46/55/65/85 and SH 55/85; this TI29-linked note is limited to BG 55/65/85 and SH 55/85 and the explicitly stated component variants. Catalog assembly links are navigation, not proof that all revisions fit.
- Section 10.6, printed 36 / PDF37, is SH only; this TI-linked note covers SH 55 and SH 85. Loosen star nut (1), insert a screwdriver or similar tool in the blower-stub recess and push the retaining tab up. At the same time turn the elbow counterclockwise as far as the stop (1/4 turn), then pull it off the stub.
- The next printed line says “Fit by inserting blower tube with lug in the stub” even though the heading, removal text and final installation line identify the elbow. Preserve this apparent wording/copy conflict; do not silently substitute a BG blower tube or claim the parts interchangeable.
- Check that the rubber sealing ring shown by the arrow is properly seated; rotate the elbow clockwise until the bayonet coupling engages. The source does not state a star-nut tightening torque or a final star-nut retightening instruction in this subsection; do not invent either as a quoted step.
- No sealing-ring or elbow number, ring dimensions, lubricating instruction or replacement criterion is supplied here. The ring is not the separate BG 45 protective-screen seal in 10.3. A shared attachment catalog destination does not verify every variant or revision fits.
- The component manual requires the instruction manual safety precautions and applicable local regulations for any engine run. Fuel work is outdoors only, away from fire, flame, sparks or heat; wipe up spilled fuel immediately. These are source-reviewed reference notes, not a complete repair instruction or hardware verification. Exact owner-manual and remaining component dependencies stay open.
TI dependency: TI 29/1999, p. 5 — TI29 section5.3 component dependency; January2005 later SH elbow and sealing-ring wording conflict.
Later manual evidence: STIHL Series 4140 Components BG, SH service manual (2005-01), section later SH elbow and sealing-ring wording conflict, PDF pages 1, 3, 4, 37
No parts-table entry added. Tool references, where present, are retained in the manual notes above.
Wrong number or missing part for the SH 55, SH 85? Report a correction →