← TS 410, TS 420

Stihl 4238 · Section N · 13 of 13 · 14 parts

Tools, Extras

Fits TS 410, TS 420.

Parts diagrams →

Historical fitment & changes (5) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
11011121323456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (14)

PosPart numberDescriptionQty
1 4224 890 3400 Combination wrench 1
2 5910 890 2305 Screwdriver 1
3 4130 893 7800 Locking pin 1
4 0000 891 0801 NLA Tool roll 1
5 4238 700 7301 Hose connector option 1
6 0000 679 2001 Gasket option 1
7 9646 945 1050 O-ring 11x1.5 option 1
8 4238 708 3100 Union nut option 1
9 4238 792 2501 Support option 1
10 4238 791 9400 Hose clamp option 1
11 9022 341 0980 Spline screw IS-M5x16 option 1
12 9214 320 0700 Lock nut M5 option 1
13 0000 967 4022 Instruction label option 1
Not numbered on the diagram — assemblies, kits and options
— 4238 670 3603 Water connection TS option 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · TS 410 / TS 420

TS 410 / TS 420: FW 20 attachment and accessory identities

An existing FW 20 accepts the specified TS 410/420 support kit; other machines require their corresponding kit.

  • Cutquik cart FW 20 WITH TS 410/420 support attachment is 4224 200 0004; it combines the basic cart with NEW support kit 4238 790 0702. The source expressly permits fitting that support kit to an EXISTING FW 20.
  • Converting the FW 20 to another STIHL cut-off machine requires that machine’s CORRESPONDING attachment kit. This does not make the TS 410/420 kit universal. The named purpose of the complete cart is guided cutting on LEVEL surfaces.
  • Water-tank mounting kit 4224 007 1011 and water tank 4223 670 6000 are listed for dusty conditions. Guide-wheel kit 4205 007 1009 is for accurate guidance along a drawn line. Wheel kit 4224 007 1014 is a separate row whose USE CELL IS BLANK; do not merge it with the guide-wheel kit.
  • The indented accessory rows are not a definitive packing list for the complete cart. The text expressly identifies the support kit in the cart combination, but does not say all water/guide-wheel accessories are included. Catalog links provide navigation, not evidence of kit contents or current availability.
  • Retained English-USA 2007 source guidance, not present-day stock availability or proof for later variants. No numeric serial cutoff is supplied. No physical interchange test was performed.

Source: TI 37/2007, p. 12 — FW 20 attachment and accessory identities.

Part numbers (6)
  • 4224 200 0004 — FW 20 with TS 410/420 support kitGuided cutting on level surfaces · TS 410 / TS 420; source restrictions apply
  • 4238 790 0702 — TS 410/420 support attachmentAlso fits existing FW 20 · TS 410 / TS 420; source restrictions apply
  • 4224 007 1011 — Water-tank mounting kitDusty conditions · TS 410 / TS 420; source restrictions apply
  • 4205 007 1009 — Guide-wheel kitDrawn-line guidance · TS 410 / TS 420; source restrictions apply
  • 4223 670 6000 — Water tankDusty conditions · TS 410 / TS 420; source restrictions apply
  • 4224 007 1014 — Wheel kitUse cell blank · TS 410 / TS 420; source restrictions apply

Service note · TS 410 / TS 420

TS 410 / TS 420: five new service tools and their distinct functions

The original illustration identifies all five tools, including two labels missed by body extraction.

  • Figure 370TI005 KN and its table identify (1) sleeve 5910 893 1707 for fitting HOOKLESS piston snap rings; (2) press sleeve 4238 893 2400 for pressing in an oil seal; (3) ring 4238 893 7000 for tensioning piston rings.
  • Item (4) clamping plate 4238 890 2100 mounts the cut-off machine on the assembly stand. Item (5) flange 4238 890 1200 is for leakage testing. The scan shows both lower illustrations and their labels, even though body extraction retains only top labels 1–3.
  • The snap-ring sleeve drawing is marked 10; that marking is NOT a 10 mm dimension or the later washer marking 21. The flange picture shows a connection, but gives no test pressure, test duration or universal adapter approval.
  • Existing special tools are referred to the TS 410/420 Service Manual in section 5.2. These five drawings are an identification/function roster, not scale manufacturing drawings or complete setup instructions.
  • Retained English-USA 2007 source guidance, not present-day stock availability or proof for later variants. No numeric serial cutoff is supplied. No physical interchange test was performed.

Source: TI 37/2007, p. 13 — five new service tools and their distinct functions.

Part numbers (5)
  • 5910 893 1707 — SleeveFit hookless piston snap rings · TS 410 / TS 420; source restrictions apply
  • 4238 893 2400 — Press sleevePress in oil seal · TS 410 / TS 420; source restrictions apply
  • 4238 893 7000 — RingTension piston rings · TS 410 / TS 420; source restrictions apply
  • 4238 890 2100 — Clamping plateMount on assembly stand · TS 410 / TS 420; source restrictions apply
  • 4238 890 1200 — FlangeLeakage testing · TS 410 / TS 420; source restrictions apply

Service note · TS 410 / TS 420

TS 410 / TS 420: service-tool washer: three holes marked 21

The original template gives three separate hole locations, not a common bolt circle.

  • Section 5.2.1 concerns washer 5910 893 2102 in service tool 5910 007 2200. Future factory-supplied tools include the modified washer with THREE ADDITIONAL holes of diameter 7/32 inch (5.5 mm) for TS 410/420. Existing washers lacking those holes may be reworked according to the source template.
  • The source says COPY the drawn-to-scale template, CUT IT OUT and place it on the washer to mark the new holes. Stamp 21 on the UPPER SIDE alongside EACH new hole. A browser screenshot or resized scan is NOT automatically a true-scale physical template; verify scale against the printed dimensions before using a copy.
  • Figure 370TI010 KN: relative to the intersecting central axes AS DRAWN, the upper-left new hole is 38.2 left and 21.1 above; the right new hole is 42.2 right and 11.2 above; the lower-left new hole is 17.3 left and 34.4 below. The top notch fixes the displayed orientation. These six dimension values are printed WITHOUT an explicit unit label on the diagram; the prose separately identifies hole diameter in inch/mm.
  • The three bold outlined holes carry 21 labels; the many faint holes are pre-existing geometry, not additional drilling targets. Do not treat 21 as a diameter, infer a common pitch circle, mirror the pattern or label these values as a verified CNC program. Washer thickness, tolerances and machining setup are not given.
  • Retained English-USA 2007 source guidance, not present-day stock availability or proof for later variants. No numeric serial cutoff is supplied. No physical interchange test was performed.

Source: TI 37/2007, p. 14 — service-tool washer: three holes marked 21.

Part numbers (2)
  • 5910 893 2102 — Service-tool washerThree added holes, each marked 21 · TS 410 / TS 420; source restrictions apply
  • 5910 007 2200 — Service toolIncludes modified washer in future supply · TS 410 / TS 420; source restrictions apply

Service note · TS 410 / TS 420

TS 410 / TS 420: gasket kit, carburetor kit and application-specific consumables

Blank application cells are not permission to use every listed compound everywhere.

  • Gasket set 4238 007 1003 is for the SHORTBLOCK. Carburetor-parts set 4238 007 1060 is expressly for C1Q-S118; the later shared catalog title C1Q-S118C / C1Q-167A does not extend that kit claim to all variants.
  • Lubricating grease 0781 120 1111 (225 g tube) is listed for oil seals, sliding and bearing points. STIHL special lubricant 0781 417 1315 is for the rope-rotor bearing bore and rewind spring in the starter cover. Dirko HT RED 0783 830 2000 is for the engine pan and OUTSIDE of oil seals.
  • Press Fluid OH 723 = 0781 957 9000; STIHL multi-purpose grease = 0781 120 1109; Loctite 242 = 0786 111 2101; Loctite 270 = 0786 111 2109; Loctite 648 = 0786 111 2117. Each of these rows has a BLANK USE CELL on the original page. Do not borrow an adjacent row’s use or treat the three Loctite products as interchangeable.
  • The unnumbered standard solvent-based degreasant must contain NO CHLORINATED OR HALOGENATED HYDROCARBONS. Its listed use is cleaning mating faces and carburetor, crankshaft stub and flywheel cone. No order number, blend, cure schedule or substitution specification is printed.
  • Retained English-USA 2007 source guidance, not present-day stock availability or proof for later variants. No numeric serial cutoff is supplied. No physical interchange test was performed.

Source: TI 37/2007, p. 15 — gasket kit, carburetor kit and application-specific consumables.

Part numbers (10)
  • 4238 007 1003 — Gasket setShortblock · TS 410 / TS 420; source restrictions apply
  • 4238 007 1060 — Carburetor parts setC1Q-S118 only as printed · TS 410 / TS 420; source restrictions apply
  • 0781 120 1111 — Lubricating grease, 225 gOil seals, sliding and bearing points · TS 410 / TS 420; source restrictions apply
  • 0781 417 1315 — STIHL special lubricantRope rotor bore and rewind spring · TS 410 / TS 420; source restrictions apply
  • 0781 957 9000 — Press Fluid OH 723Use cell blank · TS 410 / TS 420; source restrictions apply
  • 0781 120 1109 — STIHL multi-purpose greaseUse cell blank · TS 410 / TS 420; source restrictions apply
  • 0783 830 2000 — Dirko HT redEngine pan and seal exterior · TS 410 / TS 420; source restrictions apply
  • 0786 111 2101 — Loctite 242Use cell blank · TS 410 / TS 420; source restrictions apply
  • 0786 111 2109 — Loctite 270Use cell blank · TS 410 / TS 420; source restrictions apply
  • 0786 111 2117 — Loctite 648Use cell blank · TS 410 / TS 420; source restrictions apply

Service note · TS 410 / TS 420

TS 410 / TS 420: manual references, catalog edition and serial location

The serial number is underneath the machine on the tank housing; no serial range is given.

  • Section 6 says spare-parts lists will be available at market launch; the ORIGINAL SCAN names STIHL service catalogue (CD-ROM), starting with edition 03/2007. That catalogue name is absent from extracted body text. This is a historical inclusion statement, not proof that any particular installation has that edition.
  • Section 7 requires applicable national safety regulations and the instruction-manual safety instructions if starting the machine during service. Sections 7.1/7.2 refer tightening torques and servicing/repair to the TS 410/420 SERVICE MANUAL. No fastening torques or complete repair procedures are printed here.
  • Section 7.3 and figure 370TI007 KN locate the serial number on the TANK HOUSING, UNDERNEATH the machine, at the illustrated # pointer. The # is a location marker, not part of a serial value. No numeric serial cutoff, production range or decoding method is supplied.
  • The instruction-manual fuel ratio and safety instructions, existing-tool list and service-manual repair/torque details remain explicitly REFERENCED content, not recovered content in this TI. This review closes the TI’s reference statements only; whole-manual acquisition and acceptance remain separate.
  • Retained English-USA 2007 source guidance, not present-day stock availability or proof for later variants. No numeric serial cutoff is supplied. No physical interchange test was performed.

Source: TI 37/2007, p. 10 · TI 37/2007, p. 13 · TI 37/2007, p. 15 — manual references, catalog edition and serial location.

No additional parts-table entry added.

Wrong number or missing part for the TS 410, TS 420? Report a correction →