← BT 106 · BT 309

Stihl 4311 · Section B · 2 of 4 · 24 parts

Muffler, Muffler kit, Extras

Fits BT 309.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131415161718192202134405689
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (24)

PosPart numberDescriptionQty
1 1108 140 0620 Muffler 1
2 9121 347 1260 Stud M6x12 2
3 9322 630 0140 Spring washer 6 2
4 9214 320 0900 Lock nut M6 2
5 9771 021 1400 Hose clip 14-9 1
6 4203 141 9005 NLA Screen 1
8 9470 435 0540 Key 4x4x14 1
9 9455 621 3110 Circlip 28x1.5 1
10 4308 162 3201 Carrier 1
11 9455 621 1130 Circlip 12x1 1
12 4104 162 3100 Coupling element 0.404" 1
13 4308 640 2802 Spacer Fitment / change note → 1
14 9007 319 1420 NLA Hexagon head screw M6x45 Fitment / change note → 2
15 9291 021 0140 Washer 6.4 Fitment / change note → 2
16 4308 642 7800 Washer 1
17 4309 140 7300 Cover plate 1
18 4309 682 0900 Welding taper 1
19 4301 681 7800 Drill removing tool 1
20 0812 260 1008 Allen key 5 1
21 4309 007 1005 Boring head kit 1
40 9033 346 1400 Socket head screw M6x40 Fitment / change note → 2
Not numbered on the diagram — assemblies, kits and options
— 4309 007 1000 Muffler kit 1
— 4309 007 1011 Attachment kit 08S-assembly 1
— not sold separately Extras:

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · BT 308 / BT 309 / BT 360

BT 308 / BT 309 / BT 360: adapter replacement requires matching bosses and hardware

Kit 4308 640 2802 supplies the modified adapter, two M6x45 hex screws and two A 6.4 washers.

  • Adapter is the interface between POWERHEAD and DRILLING GEAR, not the carburetor adapter. Mounting-boss HEIGHT AND DIAMETER change to match hex-head screws, replacing pan-head screws with spline socket to simplify servicing. Do not treat this as an unsupported screw-only substitution into the old bosses.
  • New complete kit 4308 640 2802 includes items 1–3: modified adapter (1), TWO washers A 6.4, 9291 021 0140 (2), and TWO M6x45 hex-head screws, 9007 319 1420 (3). Drawing shows washers between screw heads and bosses. Printed MOQ H 10 for washers is an ORDER quantity, not ten fitted washers; screw/kit MOQ is 1.
  • Old bare adapter 4308 641 2801 is no longer factory-available (remark 1). New bare version is marked -*- and NOT AVAILABLE SEPARATELY (remark 2); no invented new bare-adapter number. Old M6x40 pan-head screw 9033 346 1400 REMAINS A SPARE FOR OLDER MACHINES (remark 3). No universal deletion of old screws.
  • Introduction IN PROGRESS, no serial/date cutoff or torque supplied. Supply statements are historical, not current stock. TI heading calls BT 309 series 4309; retained exact-model BT 309 sheet is consolidated under 4311. Binding follows exact model AND kit number, not inferred series equivalence. Retained 2012 sheets call kit Spacer; these labels do not replace the historical adapter description or create a different part.
  • Footer 24 August 1994; previous BT 360 TI24.90 is bibliography, not an extra unmodeled requirement.
  • Historical TI 31/1994 guidance only. No successor or unlisted model applicability inferred. No physical interchange test was performed. No hardware operation was performed.

Source: TI 31/1994, p. 1 — BT 308 / BT 309 / BT 360: adapter replacement requires matching bosses and hardware.

Part numbers (5)
  • 4308 640 2802 — Complete modified adapter kit; items 1–3new assembly · BT 308 / BT 309 / BT 360: adapter replacement requires matching bosses and hardware
  • 4308 641 2801 — Original bare adapterold; unavailable · BT 308 / BT 309 / BT 360: adapter replacement requires matching bosses and hardware
  • 9033 346 1400 — M6x40 pan-head screw with spline socketold; retained for older machines · BT 308 / BT 309 / BT 360: adapter replacement requires matching bosses and hardware
  • 9291 021 0140 — A6.4 washer; two fittednew hardware · BT 308 / BT 309 / BT 360: adapter replacement requires matching bosses and hardware
  • 9007 319 1420 — M6x45 hex-head screw; two fittednew hardware · BT 308 / BT 309 / BT 360: adapter replacement requires matching bosses and hardware

Wrong number or missing part for the BT 309? Report a correction →