Stihl 4314 · Section F · 6 of 16 · 37 parts
Gear head
Fits BT 45.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (37)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4314 641 0300 | Gear housing, left | 1 |
| 2 | 9503 003 5030 | Grooved ball bearing 6000-2RS | 2 |
| 3 | 4314 160 2900 | Clutch drum | 1 |
| 4 | 4314 640 5700 | Driver | 1 |
| 5 | 9645 945 7699 | O-ring 23x1.5 | 1 |
| 6 | 9516 003 2020 | Ball Ø 5 mm | 1 |
| 7 | 0000 997 2001 | Compression spring | 1 |
| 8 | 4314 641 7000 | Bracket | 1 |
| 9 | 9075 240 0630 | Screw M4x8 | 2 |
| 10 | 4314 704 6400 | Shift fork | 1 |
| 11 | 4314 642 2602 | Shaft | 1 |
| 12 | 4314 642 2601 | Shaft | 1 |
| 13 | 0000 958 6501 | Washer | 1 |
| 14 | 4314 642 0700 | Drive gear | 1 |
| 15 | 0000 958 6505 | Washer | 1 |
| 16 | 4314 642 0702 | Drive gear | 1 |
| 17 | 0000 958 6503 | Washer | 2 |
| 18 | 9461 620 1525 | Snap ring 15x1.2 | 1 |
| 19 | 4314 642 0701 | Drive gear | 1 |
| 20 | 9503 003 5290 | Grooved ball bearing 6002-2RS | 1 |
| 21 | 9630 003 1698 | Oil seal B15x26x4 | 1 |
| 22 | 4314 640 2600 | Shaft | 1 |
| 23 | 0000 958 6502 | Washer | 5 |
| 24 | 9503 003 9860 | Grooved ball bearing 609-2RS | 1 |
| 26 | 9503 003 5190 | Grooved ball bearing 6001-2RS | 2 |
| 27 | 0000 958 6504 | Washer | 1 |
| 28 | 4314 642 0800 | Drive sprocket | 1 |
| 29 | 0000 958 6506 | Washer | 1 |
| 30 | 4314 162 3300 | Carrier washer | 1 |
| 31 | 9485 648 1560 | Cup spring 25x12.2x1.5 | 2 |
| 32 | 9210 260 1465 | Hexagon nut M12x1.25 | 1 |
| 33 | 4314 642 0103 | Spur gear | 1 |
| 34 | 4314 641 0310 | Gear housing, right | 1 |
| 35 | 9075 478 4136 | Pan head self-tapping screw IS-D5x20 | 6 |
| 36 | 0783 830 2000 | Tube of sealant Dirko HT red option | 1 |
| 37 | 0781 120 1117 | Gear lubricant 80 g option | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 4314 640 0100 | Gearhead | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · BT 45
BT 45: unchanged chuck-kit numbers and longer left-hand screw
The new washer may only be used with the new 28 mm screw.
- Chuck kits 4314 007 1000 AND 4314 007 1004 retain their order numbers but gain washer 0000 958 6511 between chuck and shaft to improve contact. Figure 421TI011 shows alternative chucks 1/2, shaft 3, washer 4 and retaining screw 5; it does not instruct fitting both chucks together.
- Previous screw 9061 373 1350, ISO7046-M6LHx25-12.9, becomes 9061 373 1352, ISO7046-M6LHx28-12.9: LEFT-HAND M6, new screw 3 mm longer. Previous screw no longer factory available; new screw may be used on older machines. No tightening torque or thread pitch is supplied.
- Washer 0000 958 6511 may ONLY be used with NEW screw 9061 373 1352. Do not pair it with the old 25 mm screw or replace the specified left-hand screw with a right-hand M6 screw.
- Summary rows 11/13 are old kit versions including old screw 15; rows 12/14 are new versions under the SAME kit numbers, including new screw 16 AND washer 17. Old versions discontinued; new versions permitted on older machines, subject to the washer/screw pairing. Part-number equality alone cannot identify the kit revision.
- Historical English-USA 2008 source, not present-day stock or approval for unlisted variants. No numeric serial cutoff is supplied. No physical interchange test was performed.
Source: TI 18/2008, p. 3 · TI 18/2008, p. 4 — BT 45: unchanged chuck-kit numbers and longer left-hand screw.
Part numbers (5)
- 4314 007 1000 — Chuck kitUnchanged number; revised contents · BT 45; source restrictions apply
- 4314 007 1004 — Chuck kitUnchanged number; revised contents · BT 45; source restrictions apply
- 0000 958 6511 — WasherOnly with new 28 mm screw · BT 45; source restrictions apply
- 9061 373 1350 — ISO7046-M6LHx25-12.9 screwPrevious 25 mm left-hand · BT 45; source restrictions apply
- 9061 373 1352 — ISO7046-M6LHx28-12.9 screwNew 28 mm left-hand · BT 45; source restrictions apply
Wrong number or missing part for the BT 45? Report a correction →