Stihl 4803 · Section A · 1 of 4 · 27 parts
Housing, Electric motor
Fits FE 55.
Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.
Parts (27)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 4808 791 1105 | Handle molding, left Fitment / change note → | 1 |
| 2 | 4808 791 1100 | Handle molding, right Fitment / change note → | 1 |
| 3 | 4803 600 0201 | Electric motor 230/240 V | 1 |
| 3 | 4803 600 0200 | Electric motor 120 V | 1 |
| 4 | 4803 086 0501 | Fanwheel | 1 |
| 5 | 4808 710 7600 | Adapter | 1 |
| 6 | 0751 030 8958 | Terminal socket 4.8-1 no longer available from factory | 2 |
| 7 | 4808 440 2000 | Connecting cable Fitment / change note → | 1 |
| 8 | 4808 440 2001 | Connecting cable | 1 |
| 9 | 4808 440 2002 | Connecting cable | 1 |
| 10 | 4808 440 2003 | Connecting cable | 1 |
| 11 | 4808 440 2004 | Connecting cable | 1 |
| 12 | 0751 030 8958 | Terminal socket 4.8-1 no longer available from factory | 2 |
| 13 | 0751 030 8470 | Grommet Fitment / change note → no longer available from factory | 4 |
| 14 | 1204 431 2400 | Cable protector Fitment / change note → | 1 |
| 15 | 1204 431 2500 | Cable clamp Fitment / change note → | 1 |
| 16 | 9074 478 3075 | Pan head self-tapping screw IS-P4x19 Fitment / change note → | 2 |
| 17 | 4803 430 0500 | Switch | 1 |
| 18 | 4808 435 2400 | Trigger switch Fitment / change note → | 1 |
| 19 | 4137 182 0801 | Lockout lever | 1 |
| 20 | 4808 791 8200 | Torsion spring Fitment / change note → | 1 |
| 21 | 4803 791 6600 | Flap | 1 |
| 22 | 4803 791 8200 | Torsion spring | 1 |
| 23 | 4803 792 2601 | Support | 1 |
| 24 | 9074 478 4425 | Pan head self-tapping screw IS-P6x19 | 8 |
| 25 | 4803 605 1000 | Capacitor | 1 |
| 26 | 0751 030 8395 | Terminal socket no longer available from factory | 2 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Conditional replacement · FE 55 / EC 70
FE 55 / EC 70: interlock requires matched lever and handle moldings
From serial 2 40 958 562, hold trigger interlock 1 down before operating switch lever 2; the changed lever and two housing moldings cannot be replaced individually.
2 40 958 562 — Starting interlock and associated cable/model upgrade introduced from this serial on FE 55 and EC 70 only; not a model-identification range.
- Figure 349TI000 KN identifies trigger interlock1 above switch lever2. The interlock must be pressed down and held; only then can the switch lever (trigger) operate to start the unit. The lever shape changes and the handle housing gains an interlock slot. This is not a latch, an instruction to defeat the interlock or a complete electrical repair procedure.
- The source explicitly says the switch lever and the two housing moldings cannot be replaced individually. Preserve the matched-change requirement; the individual order numbers do not establish independent old/new interchange. The old versions remain available as spares for older machines under remark1, not a direction to remove an interlock from a later machine.
- First summary: new trigger interlock 4137 182 0800 (item1), switch lever 4803 435 2400 to 4808 435 2400 (item2), and new torsion spring 4808 791 8200 (item3). The old-column dashes for items1 and3 indicate no previous number in this table, not an extra replacement part.
- The old left moldings are model-specific: FE 55 uses 4803 791 1105 (item4), EC 70 uses 4803 791 1115 (item5); both rows change to 4808 791 1105. Right molding 4803 791 1100 changes to 4808 791 1100 (item6) for both models. Remark1 applies to items2,4,5,6. Do not swap the two old left molding numbers between models.
- The later exact FE 55 current sheet lists lockout lever 4137 182 0801, whereas TI10 and the exact EC 70 sheet list 4137 182 0800. No 0800-to-0801 supersession or interchange is established here. FE 55 has separate retained current and (10.1999) housing sheets; EC 70 retains new and original rows on its motor sheet. These dated catalog arrangements do not alter the TI serial boundary.
- Both modifications start from printed serial number 2 40 958 562 for FE 55 and EC 70; this is a model-conditioned change boundary, not a global model-identification interval. The TI calls both series 4803; the retained EC 70 catalog is filed under 4133. Binding uses the exact EC 70 model label, not an invented series correction or every machine sharing these numbers. Availability statements are historical; no physical retrofit was verified.
Source: TI 10/1999, p. 1 · TI 10/1999, p. 2 — Both complete original pages: interlock and model upgrade, both drawings, both summaries and remarks.
Part numbers (9)
- 4137 182 0800 — Trigger interlock; first table item1New interlock · FE 55 and EC 70; TI10/1999 conditions apply
- 4803 435 2400 — Original switch lever; first table item2Original spare for older machines; remark1 · FE 55 and EC 70; TI10/1999 conditions apply
- 4808 435 2400 — New switch lever; first table item2Matched change with both moldings · FE 55 and EC 70; TI10/1999 conditions apply
- 4808 791 8200 — Torsion spring; first table item3New interlock spring · FE 55 and EC 70; TI10/1999 conditions apply
- 4803 791 1105 — Original FE 55 left handle molding; item4Original spare for older FE55; remark1 · FE 55 only; TI10/1999 conditions apply
- 4803 791 1115 — Original EC 70 left handle molding; item5Original spare for older EC70; remark1 · EC 70 only; TI10/1999 conditions apply
- 4808 791 1105 — New left handle molding; items4 and5Same new number for both models; matched change · FE 55 and EC 70; TI10/1999 conditions apply
- 4803 791 1100 — Original right handle molding; item6Original spare for older machines; remark1 · FE 55 and EC 70; TI10/1999 conditions apply
- 4808 791 1100 — New right handle molding; item6Matched change with lever and left molding · FE 55 and EC 70; TI10/1999 conditions apply
Conditional replacement · FE 55 / EC 70
FE 55 / EC 70: rubber cable and reinforced strain protection
Cable 4808 440 2000 replaces PVC cable 4803 440 2000 with a rubber cable, an included grommet and protector, plus a separate clamp and IS P4x19 screw.
2 40 958 562 — Starting interlock and associated cable/model upgrade introduced from this serial on FE 55 and EC 70 only; not a model-identification range.
- Page1 section2 changes the connecting cable from PVC to rubber in connection with the starting interlock. The new cable has a reinforced cable protector and is secured in the handle housing by a cable clamp. Original scan text resolves the corrupted extracted words rubber and protector; raw extracted text is preserved.
- Second summary item1 changes connecting cable 4803 440 2000 to 4808 440 2000. The cable explicitly includes item2 grommet 0751 030 8470 and item3 cable protector 1204 431 2400. It does not say that item4 cable clamp 1204 431 2500 or item5 spline screw IS P4x19, 9074 478 3075, is included in the cable.
- Figure 349TI003 SC shows cable1, protector3 at the housing entry, grommet2 at the internal connection, and clamp4 retained by screw5. Drawing labels identify components, not quantities, wire-terminal polarity or screw torque. The TI gives no cable length, voltage-specific selection or complete wiring/test procedure.
- Second-table remark1 applies to the old cable: it remains available as a spare for older machines. Remark2 applies to the previous cable protector, marked -*-: its original version was not a spare part. That statement does not mean the new protector is non-orderable, and the placeholder is not an order number.
- The retained later FE 55 and EC 70 exact sheets list all five new cable-system numbers. Their grommet and screw quantities differ from simply counting TI diagram labels; no quantity is derived from this TI. FE 55 additionally lists cable endings2001–2004, but TI10 establishes only the2000 change and no market/voltage assignment or interchange for those extra variants.
- TI08/1995 for FE 55 and TI18/1993 for EC 70 are footer bibliography, not missing dependencies for the two self-contained changes. No wiring work, energization or hardware testing was performed.
- Both modifications start from printed serial number 2 40 958 562 for FE 55 and EC 70; this is a model-conditioned change boundary, not a global model-identification interval. The TI calls both series 4803; the retained EC 70 catalog is filed under 4133. Binding uses the exact EC 70 model label, not an invented series correction or every machine sharing these numbers. Availability statements are historical; no physical retrofit was verified.
Source: TI 10/1999, p. 1 · TI 10/1999, p. 2 — Both complete original pages: interlock and model upgrade, both drawings, both summaries and remarks.
Part numbers (6)
- 4803 440 2000 — Original PVC connecting cable; second table item1Remains spare for older machines; remark1 · FE 55 and EC 70; TI10/1999 conditions apply
- 4808 440 2000 — New rubber connecting cable; second table item1Includes items2 and3 only as stated · FE 55 and EC 70; TI10/1999 conditions apply
- 0751 030 8470 — Grommet; second table item2Included in new cable · FE 55 and EC 70; TI10/1999 conditions apply
- 1204 431 2400 — Reinforced cable protector; second table item3Included in new cable; original version was not a spare · FE 55 and EC 70; TI10/1999 conditions apply
- 1204 431 2500 — Cable clamp; second table item4Separate securing component; inclusion not stated · FE 55 and EC 70; TI10/1999 conditions apply
- 9074 478 3075 — Spline screw IS P4x19; second table item5Secures clamp; torque and quantity not given by TI · FE 55 and EC 70; TI10/1999 conditions apply
Wrong number or missing part for the FE 55? Report a correction →