← FE 55

Stihl 4803 · Section C · 3 of 4 · 16 parts

Drive tube assembly

Fits FE 55.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
11011121314151623456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (16)

PosPart numberDescriptionQty
1 4803 710 7130 Drive tube assembly Ø 25.4 mm / 1" Fitment / change note → 1
2 4803 710 7131 Drive tube assembly Ø 25.4 mm / 1" Fitment / change note → 1
3 0000 967 7204 Warning pictogram FSE 1
4 0000 967 7205 Warning pictogram FSE 1
5 4130 711 3200 Drive shaft 1
6 4130 790 1300 Loop handle 1
7 4130 790 1200 Loop handle 1
8 4130 791 2000 Handle hose 1
9 9075 478 4115 Pan head self-tapping screw IS-D5x16 1
10 4130 791 6805 Clamp 1
11 9041 116 1430 Pan head screw M6x50 1
12 9222 068 0900 Square nut M6 1
13 9022 341 1430 Spline screw IS-M6x50 1
14 9294 021 0140 Washer 6.4 1
15 4130 710 9000 Harness option 1
16 0000 884 0307 Safety glasses option 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · FE 55

FE 55: aluminium shafts retain separate regional replacement pairs

Steel-to-aluminium change reduces stated unit weight from 4.2 kg to 3.8 kg.

  • USA/CDN shaft 4803 710 7100 changes to 4803 710 7130. The other listed shaft 4803 710 7101 changes to 4803 710 7131. Source says original and new shafts are COMPLETELY INTERCHANGEABLE; retain this within each printed replacement pair, not as permission to exchange regional versions.
  • Steel shafts are replaced with aluminium, reducing stated UNIT weight from 4.2 kg (9.25 lb.) to 3.8 kg (8.4 lb.). These are machine weights, not shaft weights. Original shafts are no longer factory-available. Introduction in progress, no serial given.
  • Historical TI 14/1994 guidance for the explicitly named models only; no successor or unlisted variant applicability inferred. Factory supply statements are historical, not current stock claims. MOQ columns are order quantities, not fitting quantities. No physical interchange test was performed.

Source: TI 14/1994, p. 1 — FE 55: aluminium shafts retain separate regional replacement pairs.

Part numbers (4)
  • 4803 710 7100 — USA/CDN steel shaftoriginal · FE 55: aluminium shafts retain separate regional replacement pairs
  • 4803 710 7130 — USA/CDN aluminium shaftnew, corresponding replacement · FE 55: aluminium shafts retain separate regional replacement pairs
  • 4803 710 7101 — Other listed steel shaftoriginal · FE 55: aluminium shafts retain separate regional replacement pairs
  • 4803 710 7131 — Other listed aluminium shaftnew, corresponding replacement · FE 55: aluminium shafts retain separate regional replacement pairs

Wrong number or missing part for the FE 55? Report a correction →