Stihl 1106 · Section D · 4 of 17 · 34 parts
Ignition system
Fits 070.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (34)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 0000 989 0810 | Grommet | 2 |
| 2 | 0000 992 5820 | Sealing ring | 1 |
| 3 | 1106 400 0705 | Stator plate | 1 |
| 4 | 1106 404 3210 | Ignition coil | 1 |
| 5 | 9110 313 0700 | Flat head screw M4x19 | 2 |
| 6 | 1106 400 2001 | Set of points | 1 |
| 7 | 9041 216 0630 | Pan head screw M4x8 | 1 |
| 8 | 9322 630 0100 | Spring washer 4 | 1 |
| 9 | 1115 404 3400 | Capacitor | 1 |
| 10 | 1115 404 8800 | Cap | 1 |
| 11 | 9321 630 0080 | Spring washer 3 | 1 |
| 12 | 9210 260 0400 | Hexagon nut M3 | 1 |
| 13 | 1106 442 1201 | Short circuit wire | 1 |
| 14 | 1110 442 7000 NLA | Contact sleeve no longer available from factory | 1 |
| 15 | 0751 030 8951 | Terminal socket A3-1 no longer available from factory | 1 |
| 16 | not sold separately | Ignition lead 375 mm not available as a separate item | 1 |
| 17 | 0000 989 1010 | Grommet | 1 |
| 18 | 1110 404 4200 | Felt wick | 1 |
| 19 | 1106 400 8201 | Dust cap | 1 |
| 20 | 1106 404 8300 | Plug | 1 |
| 21 | 9047 319 0360 | Pan head screw M3x10 Fitment / change note → | 2 |
| 22 | 1106 400 1206 | Flywheel | 1 |
| 23 | 9021 319 0670 | Pan head screw M4x14 | 2 |
| 24 | 1106 086 0505 | Fanwheel | 1 |
| 25 | 1106 086 0510 | Fanwheel | 1 |
| 26 | 0000 961 5115 | Ring | 1 |
| 27 | 0000 958 1001 | Washer | 1 |
| 29 | 1106 084 9100 | Bushing | 1 |
| 30 | 9210 261 1340 | Hexagon nut M10x1 | 1 |
| 31 | 9482 435 0430 | Woodruff key 3x5.5 | 1 |
| 32 | 1106 404 3401 | Capacitor | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 1106 400 0512 | Magneto Fitment / change note → | 1 |
| — | 0000 405 0600 NLA | Ignition lead 1 m option | 1 |
| — | 0000 930 2251 | Ignition lead 10 m option | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Service note · 070 / 090
070 / 090: longer ignition dust-cap screw
M3x12 replaces M3x10; both flywheel-magneto assembly numbers stay unchanged.
X 30 095 997 — 070/090 ignition dust-cap screw modification only.
- From X 30 095 997, the dust-cap-to-retaining-plate screw changes from M3x10 to M3x12. Extra thread reach helps prevent stripping the retaining plate. This is not permission to use longer screws elsewhere; no tightening torque is printed.
- Flywheel magnetos 1106 400 0510 and 1106 400 0512 each retain the SAME number in old/new columns. Remark 1 limits the ORIGINAL versions to remaining factory stock; an unchanged assembly number does not prove the internal screw version.
- Old pan-head screw 9047 319 0360 is key 1 and remains available for OTHER MODELS (remark 2). New 9047 319 0380 is key 2, MOQ 10. Magneto MOQ cells are blank. The table lists both assemblies without assigning 0510 versus 0512 to individual models; do not invent that assignment. No 090 G extension is established.
- Historical TI 43/1994 guidance, not current stock, universal compatibility or physical verification. No hardware operation was performed.
Source: TI 43/1994, p. 2 — longer ignition dust-cap screw.
Part numbers (4)
- 1106 400 0510 — Flywheel magneto; number unchangedold version while stocks last · 070 / 090 only in the version/configuration described here
- 1106 400 0512 — Flywheel magneto; number unchangedold version while stocks last · 070 / 090 only in the version/configuration described here
- 9047 319 0360 — Original M3x10 pan-head screw; key 1retained for other models · 070 / 090 only in the version/configuration described here
- 9047 319 0380 — New M3x12 pan-head screw; key 2MOQ 10 · 070 / 090 only in the version/configuration described here
Wrong number or missing part for the 070? Report a correction →