← Contra · 070 · 090 · MS 720

Stihl 1106 · Section C · 3 of 17 · 16 parts

Rewind starter

Fits 070.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
1101112131423456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (16)

PosPart numberDescriptionQty
1 1106 080 2002 Fan housing Fitment / change note → 1
2 1110 084 9102 Bushing 1
3 0000 967 2035 Nameplate STIHL 1
4 0000 967 2021 Nameplate STIHL Fitment / change note → 1
5 0000 974 1000 Round head rivet 3x6 Fitment / change note → 2
6 1106 195 9015 Washer 1
7 1117 190 0601 Rewind spring 1
8 1117 190 1011 Rope rotor 1
9 1107 195 8200 Starter rope Ø 4.5x1000 mm 1
10 1110 195 3400 Starter grip 1
11 1124 195 7200 Pawl 1
12 1118 162 8935 Washer 1
13 1117 195 3500 Spring 1
14 9048 216 1010 Pan head screw M5x18 4
Not numbered on the diagram — assemblies, kits and options
— 1106 080 2802 Fan cover with rewind starter 1
— 0000 930 2200 NLA Starter rope Ø 4.5 mm x 30.5 m option 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · 070

070: fan-housing nameplate compatibility

070 only; same housing number, countersunk holes and retained old plates.

X 33 878 645 — From this machine number, for this named component and model only; not a model-production interval or calendar date.

  • From X 33 878 645, 070 fan housing 1106 080 2002 retains its number but gains countersunk holes for plastic nameplate 0000 967 2032, formerly aluminum 0000 967 2021. Only modified housing available from factory. Table describes housing including items 2/3, although new rivet cell is deleted; do not add rivets to a clip-in plate.
  • Plastic plate CANNOT fit original uncountersunk fan housing. Old aluminum plate and TWO 3x6 rivets 0000 974 1000 remain spares for older machines. No 090 fan-housing change or drilling/countersinking procedure inferred.
  • Current 070 IPL lists plastic nameplate 0000 967 2035 alongside old 2021; TI prints 2032. Preserve this unresolved edition/part-number difference without silently changing the historical number.
  • Historical TI20/1996 only; stock statements are not present availability. Shared 090/090 G IPL sheets do not extend this note to 090 G. No hardware operation was performed.

Source: TI 20/1996, p. 1 · TI 20/1996, p. 2 — fan-housing nameplate compatibility.

Part numbers (4)
  • 1106 080 2002 — Fan housingSame number, changed hole geometry · 070
  • 0000 967 2021 — Aluminum nameplateOld-machine spare · 070 original fan housing
  • 0000 967 2032 — Plastic nameplateNew in TI; current IPL differs · 070 modified fan housing
  • 0000 974 1000 — Round-head rivet 3x6, twoOld-machine spare · 070 original fan housing

Wrong number or missing part for the 070? Report a correction →