← Contra · 070 · 090 · MS 720

Stihl 1106 · Section K · 10 of 19 · 24 parts

Air filter

Fits 090, 090 G.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111213141516171819220212223242434567899
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (24)

PosPart numberDescriptionQty
1 1106 791 7601 Support 1
2 9334 630 0140 Spring washer 6 1
3 9045 319 1320 Socket head screw M6x20 1
4 1106 149 0400 Sealing ring 1
5 1106 080 1600 Shroud Fitment / change note → 1
6 9121 347 1000 Stud M5x38 1
7 9646 945 0150 O-ring 4x1 1
8 1106 182 2400 Clamp 1
9 9048 216 1010 Pan head screw M5x18 3
10 1106 180 2500 Choke rod 1
11 1106 120 1602 Air filter, fleece 1
12 1106 120 1610 Air filter, wire mesh 1
13 1106 084 0601 Cover Fitment / change note → 1
14 1110 140 9501 Twist lock 1
15 0000 958 1705 Washer 1
16 1106 020 9500 Button 1
17 0000 997 1705 Compression spring 1
18 9460 624 0800 E-clip 8 1
19 1106 967 1503 Model plate 090 AV Fitment / change note → 1
20 1106 967 1502 Model plate 090 Fitment / change note → 1
21 0000 967 3501 Instruction label 1
22 0000 967 2001 Nameplate 1
23 0000 967 1545 Model plate 090 AV Fitment / change note → 1
24 0000 974 1000 Round head rivet 3x6 Fitment / change note → 2

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Historical fitment · 090

090: plastic cover nameplates and unchanged shroud number

From X 33 878 645; plastic plates do not fit original uncountersunk covers.

X 33 878 645 — From this machine number, for this named component and model only; not a model-production interval or calendar date.

  • Original separate riveted aluminum logo plate on shroud and model plate on cover are replaced by ONE combined plastic logo/model plate on the cover. Two retaining lugs engage countersunk cover holes; shroud mounting holes and frame are deleted. Shroud 1106 080 1600 keeps its number; only modified shroud supplied. Cover 1106 084 0600 becomes 1106 084 0601; old cover while stocks last.
  • Model 090: aluminum 0000 967 1544 becomes plastic 1106 967 1502. Model 090 AV: aluminum 0000 967 1545 becomes plastic 1106 967 1503. These variants remain distinct; no AV plate assigned to a non-AV model.
  • Plastic nameplates CANNOT fit original shroud/cover versions lacking countersunk mounting holes. Aluminum plates and round-head rivets 0000 974 1000, 3x6, remain spare parts for older machines. Table specifies TWO rivets EACH for shroud and cover in the old arrangement. No countersinking retrofit or universal plastic-plate substitution authorized by this TI.
  • Historical TI20/1996 only; stock statements are not present availability. Shared 090/090 G IPL sheets do not extend this note to 090 G. No hardware operation was performed.

Source: TI 20/1996, p. 1 · TI 20/1996, p. 2 — plastic cover nameplates and unchanged shroud number.

Part numbers (8)

Wrong number or missing part for the 090, 090 G? Report a correction →