Stihl 1114 · Section C · 3 of 10 · 36 parts
Ignition system
Fits FS 200, FS 202.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (36)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1118 400 1001 | Trigger unit | 1 |
| 2 | 1114 405 8800 | Hose | 1 |
| 3 | 1114 405 1900 | Bracket | 1 |
| 4 | 9041 216 0610 | Pan head screw M4x6 | 1 |
| 5 | 1114 440 1106 | Short circuit wire | 1 |
| 6 | 1114 442 7000 | Contact sleeve | 1 |
| 7 | 1114 405 0805 | Grommet | 1 |
| 8 | 9041 216 0300 | Pan head screw M3x4 | 1 |
| 9 | 1114 448 1200 | Lead retainer | 1 |
| 10 | 9021 319 0670 | Pan head screw M4x14 | 1 |
| 11 | 1114 430 0200 | Stop switch | 1 |
| 12 | 9039 488 0340 | Self-tapping screw M3x8 | 1 |
| 13 | 1114 404 3200 | Ignition coil | 1 |
| 14 | not sold separately | Ignition lead 225 mm not available as a separate item | 1 |
| 15 | 9048 319 0710 | Pan head screw M4x20 | 2 |
| 17 | 0000 989 0801 | Grommet | 1 |
| 18 | 1113 405 8800 | Hose | 1 |
| 19 | 0000 998 0603 | Torsion spring → replaced by 0000 998 0604 TI 30/1995 | 1 |
| 20 | 1106 405 1000 | Spark plug boot → replaced by 1128 405 1000, 1128 405 1000 TI 30/1995 | 1 |
| 21 | 9482 435 0030 | Woodruff key 2x3.7 | 1 |
| 22 | 1114 400 1211 | Flywheel | 1 |
| 23 | 0000 998 1104 | Torsion spring | 2 |
| 24 | 1114 195 7200 | Pawl | 2 |
| 25 | 1114 195 7800 | Pin | 2 |
| 26 | 9210 261 1140 | Hexagon nut M8x1 | 1 |
| 28 | 1114 141 1805 | Sleeve | 1 |
| 29 | 9771 021 2580 | Hose clip Ø 34x7 | 1 |
| 30 | 1114 120 2201 | Flange | 1 |
| 31 | 0000 953 0806 | Stud M5x43 | 2 |
| 32 | 0000 988 5204 | Connector | 1 |
| 33 | 1114 120 0604 | Carburetor WT-15A | 1 |
| 34 | 1119 141 8600 | Impulse hose 106 mm / 4.2'' | 1 |
| 35 | 9210 260 0700 | Hexagon nut M5 | 2 |
| 36 | 1114 182 1502 | Throttle rod | 1 |
| 60 | 0000 953 0806 | Stud M5x43 | 2 |
| 61 | 0000 988 5204 | Connector | 1 |
Parts are not interchangeable across engine series — check yours before ordering.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Historical fitment · FS 120 / FS 200
FS 120 / FS 200: series 4134 replacement ignition assignment
4134 400 1306 with flywheel 4134 400 1200; ignition lead not replaceable.
- Printed series 4134. Use 4134 400 1306 with flywheel 4134 400 1200.
- The asterisk means ignition lead not replaceable; it is not a zero or unspecified cut length.
- TI01/1999 lists replacement combinations for the then-current machines, not every earlier configuration. Older machines are referred to Spare Parts for Previous Models in their own illustrated parts lists; no serial cutoff is supplied here.
- Use only the listed ignition-module/flywheel combinations. The source warns that incorrect combinations can cause excessive RPM or running in reverse; sharing a module number does not make all flywheels interchangeable.
- Universal replacement modules may differ from production modules in maker, shape and part number. The source describes installation/function compatibility within its assignments, not universal compatibility or a project hardware test.
- Some replacement modules require shortening the ignition lead and/or short-circuit wire and crimping a different short-circuit connector. The table gives ignition-lead lengths only; it supplies neither a short-circuit-wire length nor a connector part number. Do not infer that every row needs modification.
- Only the named models and printed series are covered. A shared IPL sheet does not extend this assignment to unnamed models or modern MS equivalents. This 1999 USA bulletin is historical guidance, not current availability.
- The bulletin prints series 4134; the retained exact-model ignition sheets are cataloged under 1114, 4134. This link is an exact model-label navigation aid, not proof that the printed series identifiers are equivalent. Verify the actual machine configuration.
Source: TI 1/1999, p. 1 · TI 1/1999, p. 3 — 1.1 general restrictions and 1.2.2 power-tool assignments.
Part numbers (2)
- 4134 400 1306 — Replacement ignition moduleAssigned component · FS 120 / FS 200, printed series 4134, listed combination only
- 4134 400 1200 — Assigned flywheelRequired pairing · FS 120 / FS 200, printed series 4134
Wrong number or missing part for the FS 200, FS 202? Report a correction →