Stihl 1121 · Section C · 3 of 16 · 25 parts
Oil pump
Fits 024.
Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.
Parts (25)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1121 640 3203 | Oil pump adjustable | 1 |
| 2 | not sold separately | Clutch drum not available as a separate item | 1 |
| 3 | 0000 958 0408 | Washer | 2 |
| 4 | 0000 997 2002 | Compression spring | 1 |
| 5 | 1121 647 0603 | Pump piston | 1 |
| 6 | 1121 641 9400 | Bearing bushing | 1 |
| 7 | 9646 945 0160 | O-ring 4x2 | 1 |
| 8 | 1128 647 4806 | Control bolt | 1 |
| 9 | 9380 620 1090 | Roll pin 2x10 | 1 |
| 10 | 0000 958 1234 | Washer | 1 |
| 11 | 1121 640 7111 | Worm | 1 |
| 12 | 1121 647 3100 | Carrier | 1 |
| 13 | 0000 993 0508 | Ring 12x15x12 | 1 |
| 14 | 9022 313 0660 | Spline screw IS-M4x12 | 2 |
| 15 | 0000 958 0407 | Washer | 2 |
| 16 | 0000 997 0504 | Compression spring | 1 |
| 17 | 1121 647 0601 | Pump piston | 1 |
| 18 | 1121 647 7002 NLA | Plug | 1 |
| 19 | 1121 640 7110 | Worm | 1 |
| 20 | 1121 640 3201 | Oil pump 5 (0.5 mm stroke) Fitment / change note → | 1 |
| 21 | 1121 640 3202 | Oil pump 65 (0.65 mm stroke) option | 1 |
| 22 | 1121 640 9400 | Hose 75 mm / 3'' | 1 |
| 23 | 1121 036 1600 | Worm option | 1 |
| 24 | 1121 647 7000 | Plug | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 1121 007 1043 | Conversion kit oil pump, adjustable option | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Conditional replacement · 024
024: black-plastic oil pump 5 reduces stroke to 0.5 mm
New pump 1121 640 3201 replaces die-cast pump 1121 640 3210 on 024; the new black body identifies the 0.5 mm-stroke design.
- Section 1 left column and figure 133TI040 KN distinguish previous oil pump 65, 1121 640 3210, with magnesium die-cast body and 0.65 mm stroke from new oil pump 5, 1121 640 3201, with black-plastic body and 0.5 mm stroke. These are pump-stroke dimensions, not oil pressure or volume per minute.
- The prose separately compares the new black body with a previous production-line pump made of off-white plastic, while the numbered Previous replacement-pump row is the magnesium die-casting. The production-line plastic pump receives no separate order number here; do not silently identify it with the die-cast 3210 or import the 026 new-pump number.
- Page 2 summary items 1–2 and remark 1 retain the old 3210 factory supply only while existing stocks last. The in-progress introduction line on that table expressly names 026, not an 024 serial/date cutoff.
- The exact 024 later catalog retains 3201 at position 20 and also 3202 at 21, plus adjustable 3203 and a conversion kit. This TI documents the 024 3201 change only; the later coexistence does not prove 3201/3202 interchange or authorize an adjustable-pump conversion.
- TI12/1999 historical guidance for the explicitly named 024/026 configurations only. No MS successor or general part-number-prefix compatibility is inferred. Factory supply statements are historical, not current availability. No physical interchange, oil-delivery measurement or brake test was performed.
Source: TI 12/1999, p. 1 · TI 12/1999, p. 2 · TI 12/1999, p. 3 — All three original USA pages: contents, sections1–4, four figures, all summaries, remarks and serial conditions.
Part numbers (2)
- 1121 640 3210 — Previous oil pump 65; magnesium die-casting, 0.65 mm strokePrevious replacement pump; stocks-only supply · 024; TI12/1999 section-specific conditions apply
- 1121 640 3201 — New oil pump 5; black plastic, 0.5 mm strokeReplacement specified for 024 · 024; TI12/1999 section-specific conditions apply
Wrong number or missing part for the 024? Report a correction →