Stihl 1121 · Section D · 4 of 16 · 38 parts
Clutch, Chain sprocket
Fits 024.
Historical fitment & changes (4) — includes parts and conditions not shown on this drawing.
Parts (38)
| Pos | Part number | Description | Qty |
|---|---|---|---|
| 1 | 1121 162 1001 | Cover washer Fitment / change note → | 1 |
| 2 | 1121 162 3201 | Carrier Fitment / change note → | 1 |
| 3 | 1121 162 0802 | Clutch shoe | 3 |
| 4 | 0000 997 5600 | Tension spring | 3 |
| 5 | 1127 162 3000 | Retainer Fitment / change note → | 3 |
| 6 | 1121 162 3000 | Retainer Fitment / change note → | 3 |
| 7 | 1121 162 3205 | Carrier Fitment / change note → | 1 |
| 8 | 1121 640 2005 | Chain sprocket 0.325" 8T | 1 |
| 9 | 1121 640 2000 NLA | Chain sprocket 0.325" 7T | 1 |
| 10 | 1121 640 2001 NLA | Chain sprocket 0.325" 8T option | 1 |
| 11 | 9512 933 2260 | Needle cage 10x13x10 | 1 |
| 12 | 9512 003 2260 | Needle cage 10x13x10 → replaced by 9512 933 2380 TI 55/2000 option | 1 |
| 13 | 0000 958 1022 | Washer Ø 27 mm | 1 |
| 14 | 9460 624 0801 | E-clip 8x1.3 | 1 |
| 15 | 1121 792 9101 | Hand guard | 1 |
| 16 | 1121 160 5000 | Lever → replaced by 1128 160 5000 TI 8/1994 | 1 |
| 17 | 1121 162 5010 | Lever | 1 |
| 18 | 0000 997 0628 | Spring | 1 |
| 19 | 9460 624 0400 | E-clip 4 | 2 |
| 20 | 1121 160 5400 | Brake band | 1 |
| 21 | 1121 160 5501 | Tension spring Fitment / change note → | 1 |
| 22 | 1121 162 8000 | Hose 12x1x20 mm Fitment / change note → | 1 |
| 23 | 1121 021 1102 | Cover Fitment / change note → | 1 |
| 24 | 9022 313 0660 | Spline screw IS-M4x12 | 2 |
| 25 | 0000 790 6100 | Screw assy. M4 | 1 |
| 26 | 0000 642 1236 NLA | Rim sprocket 0.325" 7T option | 1 |
| 27 | not sold separately | Clutch drum not available as a separate item | 1 |
| 28 | 0000 642 1234 NLA | Rim sprocket 0.325" 8T option | 1 |
| 29 | 0000 642 1240 NLA | Rim sprocket 3/8" Picco 7T option | 1 |
| 30 | 0000 642 1241 NLA | Rim sprocket 3/8" Picco 8T optionno longer available from factory | 1 |
| 31 | 0000 642 1231 | Rim sprocket 3/8" 7T option | 1 |
| 32 | 1121 162 1000 | Cover washer | 1 |
| 33 | 0000 967 3630 | Instruction label | 1 |
| Not numbered on the diagram — assemblies, kits and options | |||
| — | 1121 160 2051 | Clutch | 1 |
| — | 1121 007 1002 NLA | Rim sprocket kit 0.325" 8T option | 1 |
| — | 1121 007 1004 | Rim sprocket kit 3/8" Picco 7T option | 1 |
| — | 1121 007 1005 | Rim sprocket kit 3/8" Picco 8T option | 1 |
| — | 1121 007 1035 NLA | Rim sprocket kit 3/8" 7T option | 1 |
Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.
Historical fitment & changes
Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.
Historical fitment · 024 / 026
024 / 026: stronger brake spring keeps the same number
The higher-strength brake spring remains 1121 160 5500; the number alone does not identify its strength revision.
X 31 103 922 — Higher-strength brake spring introduced; not the filter or decompression changeover.
- Section 3 is the unqualified chain-brake section under the 024/026 bulletin header; sections 1 and 2 explicitly limit their changes to 026. The spring change is retained for 024 and 026, not inherited by successor models.
- Original and new columns both print 1121 160 5500. Only the modified version is available from the factory according to this 1995 bulletin. No new spring dimension or strength value is given.
- The catalog sheets list 1121 160 5501. This TI does not establish 5500 → 5501 equivalence or supersession. Keep the historical number distinct and do not invent a drawing row.
- The brake-spring serial X 31 103 922 is separate from both filter-system retrofit X 30 976 775 and filter/decompression production X 32 252 039. The source supplies no global early/late model classifier.
Source: TI 31/1995, p. 1 · TI 31/1995, p. 6 — Bulletin scope and section 3: complete brake-spring note and summary.
Part numbers (1)
- 1121 160 5500 — Brake springSame number; higher-strength revision · 024 / 026 per section 3; not an alias of catalog 5501
Historical fitment · 024 / 026
024 / 026: cover washer requires modified clutch parts
Washer 1121 162 1001 must not be fitted with old carrier 1121 162 3205. The modified clutch is a replacement assembly for older machines.
- English USA TI31/2000 introduces a washer between oil pump and clutch to help prevent consequential crankcase/oil-pump damage after clutch-spring failure. That is the source design purpose, not a reproduced failure test or guaranteed protection.
- The cover washer 1121 162 1001 may be installed ONLY with modified carrier 1121 162 3201 and retainers 1127 162 3000. Do not attempt to fit it to the old clutch with carrier 1121 162 3205 and retainers 1121 162 3000: the previous clutch must be installed WITHOUT the washer. TOP on the washer faces the clutch.
- Complete clutch changes from 1121 160 2000 to 1121 160 2050, supplied with the cover washer as a replacement for older machines. Clutch shoe 1121 162 0801 is unchanged, and all other parts are as before. Complete matched-assembly replacement is not permission to add the washer to an old clutch.
- The table says the clutch includes items 1–5, but only numbered rows 2–5 are printed; the spring is drawn without its own numbered/order-number row. Preserve that omission rather than inventing item1 or a spring number.
- The clutch introduction is described as in the near future / in progress. No clutch serial cutoff is given; the page2 tank-system serial must not be applied here.
- The previous complete clutch was available only while factory stocks lasted; previous carriers and retainers remained available for older machines and other models. These historical supply statements neither identify those other models nor establish current inventory.
Source: TI 31/2000, p. 1 — Complete1: washer purpose, mandatory matched carrier/retainers, TOP orientation, all summary rows and three remarks.
Part numbers (8)
- 1121 160 2000 — Clutch completePrevious assembly; while stocks lasted · 024 / 026; English USA TI31/2000 configuration only
- 1121 160 2050 — Clutch complete with cover washerModified replacement for older machines · 024 / 026; English USA TI31/2000 configuration only
- 1121 162 3205 — Clutch carrierPrevious; must remain without cover washer · 024 / 026; English USA TI31/2000 configuration only
- 1121 162 3201 — Clutch carrierModified; required with cover washer · 024 / 026; English USA TI31/2000 configuration only
- 1121 162 0801 — Clutch shoeUnchanged · 024 / 026; English USA TI31/2000 configuration only
- 1121 162 3000 — RetainerPrevious · 024 / 026; English USA TI31/2000 configuration only
- 1127 162 3000 — RetainerModified; required with cover washer · 024 / 026; English USA TI31/2000 configuration only
- 1121 162 1001 — Cover washerNew; TOP faces clutch · 024 / 026; English USA TI31/2000 configuration only
Conditional replacement · 024 / 026 / 026 C
024 / 026: guide-ledge cover 1121 021 1102 replaces 1101
The small cover with a molded guide ledge is the universal 024/026 replacement, not the complete quick-tensioner sprocket cover.
- The integrally molded guide ledge (arrow in 133TI036 KN) eases assembly of the chain sprocket cover. Page3 item4 identifies this small cover as 1121 021 1102; remark3 permits it as a universal replacement for all model 024 and 026 saws in place of 1121 021 1101.
- Do not transfer this compatibility claim to item9 chain sprocket cover 1121 640 1700, to the special crankcase or to the whole quick chain tensioner. The modified-crankcase retrofit requirement still applies. The reverse 1101-for-1102 direction is not established.
- Historical all-024/026 wording is preserved; successor-model applicability is not inferred from shared series1121. The retained2012 026 quick-tensioner sheet provides a matching1102 row; the earlier1101 is retained as source evidence rather than silently deleted.
- Historical TI 39/1998, series 1121: small-cover compatibility only. No serial threshold, reverse interchange, MS 240/MS 260 successor applicability or current supply is established. No hardware operation was performed.
Source: TI 39/1998, p. 2 · TI 39/1998, p. 3 — Section2 cover/arrow; page3 item4 and remark3.
Part numbers (2)
- 1121 021 1101 — Previous small coverPrevious part · 024 / 026; replaced by1102 under remark3
- 1121 021 1102 — Cover with integrally molded guide ledgeReplacement · All model024 and026 saws, per historical remark3
Conditional replacement · 024 / 026
024 / 026: brake-spring hose changes at the US-production boundary
From 2 41 809 371 (US production), brake spring 1121 160 5501 includes the thinner black hose 1121 162 8000 instead of the transparent hose.
2 41 809 371 — From this serial for US production only; brake spring/hose change, not a global model range or tool-kit boundary.
- Section 3 and figure 133TI043 KN change brake spring with hose 1121 160 5500 to 1121 160 5501. The included hose changes from transparent 1125 162 8001,12x1.5x20 mm, to black 1121 162 8000,12x1x20 mm. The prose identifies wall thickness 1.5 mm versus 1 mm. The illustration and text do not establish a changed bare-spring rate or a standalone bare-spring order number.
- The printed introduction is from serial 2 41 809 371 (US production). Retain the US-production qualifier and full printed prefix; this is not a global 024/026 boundary, not the tool-kit prefix1 condition and not an instruction to combine arbitrary old/new spring-and-hose components.
- Summary remark 1 applies separately to old spring assembly 5500 and old transparent hose 8001: both remain available for other models. Other models are not named, so that remark creates no new fitment rows and is not permission to install the old combination on a post-change 024/026.
- The exact 024 clutch/chain-sprocket sheet lists new spring and hose at 21/22; the exact 026 chain-brake sheet lists them at 7/8. These binding locations preserve original IPL labels and do not add a brake repair or adjustment procedure.
- TI12/1999 historical guidance for the explicitly named 024/026 configurations only. No MS successor or general part-number-prefix compatibility is inferred. Factory supply statements are historical, not current availability. No physical interchange, oil-delivery measurement or brake test was performed.
Source: TI 12/1999, p. 1 · TI 12/1999, p. 2 · TI 12/1999, p. 3 — All three original USA pages: contents, sections1–4, four figures, all summaries, remarks and serial conditions.
Part numbers (4)
- 1121 160 5500 — Previous brake spring including transparent hoseOld assembly; retained for unnamed other models · 024 and 026 before the stated change; TI12/1999 section-specific conditions apply
- 1121 160 5501 — New brake spring including black hoseNew assembly from stated US-production boundary · 024 and 026; US-production boundary applies; TI12/1999 section-specific conditions apply
- 1125 162 8001 — Previous transparent hose 12x1.5x20 mmIncluded in old spring; retained for unnamed other models · 024 and 026 before the stated change; TI12/1999 section-specific conditions apply
- 1121 162 8000 — New black hose 12x1x20 mmIncluded in new spring;1 mm wall thickness · 024 and 026; US-production boundary applies; TI12/1999 section-specific conditions apply
Wrong number or missing part for the 024? Report a correction →