← 024 · 026 · MS 260 · MS 240

Stihl 1121 · Section P · 15 of 17 · 33 parts

Shroud, Carburetor box cover

Fits 026.

Parts diagrams →

Historical fitment & changes (6) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
11010111213131414151516181922021222324252627282933031324567899
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (33)

PosPart numberDescriptionQty
1 1121 080 1609 Shroud Fitment / change note → 1
2 1119 084 8300 Reflector foil 1
3 1122 084 7100 Cap Fitment / change note → 1
4 1121 967 1513 Model plate 026 C 1
5 1121 967 1512 Model plate 026 Fitment / change note → 1
6 1121 084 7000 Slotted nut 1
7 1121 084 6900 Insulator Fitment / change note → 1
8 1121 140 1904 Carburetor box cover Fitment / change note → 1
9 1121 141 2900 Cover Fitment / change note → 1
10 1130 141 2300 Twist lock Fitment / change note → 1
11 1121 140 1907 Carburetor box cover Fitment / change note → option 1
12 1121 141 2505 Cover Fitment / change note → option 1
13 9438 929 4040 NLA Blind rivet 5x8 option 4
14 1121 084 8201 Cover plate option 1
15 9099 021 2360 Self-tapping screw 3.5x9.5 option 4
16 1121 084 1700 Air guide option 1
18 0000 967 3692 Warning pictogram Filler cap 1
19 1121 140 1902 Carburetor box cover Fitment / change note → 1
20 1121 124 0811 Prefilter Fitment / change note → 1
21 9099 021 0160 Self-tapping screw 2.2x6.5 Fitment / change note → 1
22 1121 141 2300 Twist lock Fitment / change note → 1
23 0000 997 1335 Compression spring Fitment / change note → 1
24 1121 141 2100 Detent Fitment / change note → 1
25 9074 478 3025 Pan head self-tapping screw IS-P4x16 1
26 1121 140 1906 Carburetor box cover Fitment / change note → option 1
27 1121 141 2501 Cover option 1
28 1121 084 4100 Shutter 1
29 9099 021 2770 Self-tapping screw 3.9x13 1
30 1121 967 1506 Model plate 026 Fitment / change note → 1
31 1121 967 1510 Model plate 026 C 1
32 0000 974 1000 Round head rivet 3x6 Fitment / change note → 2
Not numbered on the diagram — assemblies, kits and options
— 1121 007 1044 Intake air preheating kit Fitment / change note → option 1
— 1121 007 1027 Intake air preheating kit Fitment / change note → option 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Conditional replacement · 026

026: new cover and summer/winter air path

The revised cover draws air at the bottom and moves its screen cover for winter operation; the preheating kit changes with the filter system.

X 32 252 039 — 026 production introduction of the new filter system and decompression valve; not the earlier complete-system retrofit threshold.

  • The new air filter, carburetor with compensator connector and carburetor box cover may be installed only as a complete assembly, and only in 026 from X 30 976 775. This earlier retrofit threshold is not the production introduction X 32 252 039. The lower tank vent gives clearance for the wider filter; TI 06/1995 is retained separately, not a missing source.
  • Combustion air now enters between the cover and tank housing at the bottom, not the old top gap. The 90° twist-lock lever secures the cover to the filter. An integral plastic screen replaces the wire-mesh prefilter.
  • For summer operation, cover 1121 141 2900 seals the screen. For winter operation, remove it and fit it in the slot at the bottom of the carburetor box cover as arrowed on page 2; warm cylinder air then mixes with cold air. This TI supplies no temperature threshold.
  • Page 4 and table item 11 include items 12–19 as applicable. New lever 1130 141 2300 replaces the old twist lock; old prefilter, two self-tapping screws, helical spring and detent are deleted from the new assembly, not required carryovers. Remark 1 retains the old cover and old components as spares.
  • Preheating kit 1121 007 1027 changes to 1121 007 1044, with carburetor box cover 1121 140 1906 changing to 1121 140 1907; all other kit parts remain as before. The new kit is for 026 with the new filter system. Old kit/cover availability is historical. No 024 or MS260 retrofit inferred.

Source: TI 31/1995, p. 1 · TI 31/1995, p. 2 · TI 31/1995, p. 3 · TI 31/1995, p. 4 · TI 31/1995, p. 5 — Sections 1.1, 1.3–1.5: cover illustration, all cover rows and preheating kit.

Part numbers (14)
  • 1121 140 1902 — Carburetor box coverOriginal · 026; complete-system conditions apply
  • 1121 140 1904 — Carburetor box coverNew · 026; complete-system conditions apply
  • 1121 124 0811 — Wire-mesh prefilterOriginal; deleted in new design · 026; complete-system conditions apply
  • 1121 141 2900 — Summer/winter screen coverNew · 026; complete-system conditions apply
  • 9099 021 0160 — Self-tapping screw B2.2x6.5Original; deleted in new design · 026; complete-system conditions apply
  • 1121 141 2300 — Twist lockOriginal; deleted in new design · 026; complete-system conditions apply
  • 1130 141 2300 — LeverNew · 026; complete-system conditions apply
  • 0000 997 1335 — Helical springOriginal; deleted in new design · 026; complete-system conditions apply
  • 1121 141 2100 — DetentOriginal; deleted in new design · 026; complete-system conditions apply
  • 9099 021 2790 — Self-tapping screw B3.9x16Original; deleted in new design · 026; complete-system conditions apply
  • 1121 007 1027 — Intake air preheating kitOriginal · 026; complete-system conditions apply
  • 1121 007 1044 — Intake air preheating kitNew · 026; complete-system conditions apply
  • 1121 140 1906 — Preheating-kit carburetor box coverOriginal · 026; complete-system conditions apply
  • 1121 140 1907 — Preheating-kit carburetor box coverNew · 026; complete-system conditions apply

Conditional replacement · 026

026: decompression cylinder and shroud need closures when unused

Only the new cylinder and shroud were supplied; non-decompression use requires the cylinder plug and shroud cap, not an open hole.

X 32 252 039 — 026 production introduction of the new filter system and decompression valve; not the earlier complete-system retrofit threshold.

  • The valve is opened manually and closes automatically when the engine starts firing. The raised shroud opening protects against accidental contact, and cover 1122 084 1405 between cylinder and shroud reduces dirt ingress. Starting comfort is a source claim, not a bench result.
  • Only new cylinder with piston 1121 020 1209 and shroud 1121 080 1609 remain available in the 1995 bulletin. For use without decompression, seal the tapped cylinder hole with plug 1122 025 2200 and the shroud opening with cap 1122 084 7100. The plug is included with the cylinder (item 20 includes 21); the cap with the shroud (24 includes 25). All other parts remain as before.
  • Use a standard deep-well 13-mm socket for the decompression valve; source torque is 14 Nm (10.3 lbf.ft), for the valve only. For the engine pressure test, the TI recommends removing the valve and sealing its hole with plug 1122 025 2200.
  • IMPORTANT: remove the decompression valve before fitting the piston-locking strip during repair. No pressure-test value, cylinder-fastener torque or complete test procedure is supplied here.
  • The section is explicitly 026; the shared bulletin header does not establish this cylinder on 024 or successor MS260. These are source instructions, not a performed hardware procedure.

Source: TI 31/1995, p. 1 · TI 31/1995, p. 2 · TI 31/1995, p. 3 · TI 31/1995, p. 4 · TI 31/1995, p. 5 — Sections 1, 1.2–1.5: valve operation, closures, service and rows 20–25.

Part numbers (8)
  • 1121 020 1208 — Cylinder with pistonOriginal · 026; valve/closure configuration conditions above
  • 1121 020 1209 — Cylinder with pistonNew; includes plug · 026; valve/closure configuration conditions above
  • 1122 025 2200 — Cylinder plugRequired closure when valve absent · 026; valve/closure configuration conditions above
  • 1128 020 9400 — Decompression valveNew · 026; valve/closure configuration conditions above
  • 1122 084 1405 — Cover between cylinder and shroudNew · 026; valve/closure configuration conditions above
  • 1121 080 1608 — ShroudOriginal · 026; valve/closure configuration conditions above
  • 1121 080 1609 — ShroudNew; includes cap · 026; valve/closure configuration conditions above
  • 1122 084 7100 — Shroud capRequired closure when valve absent · 026; valve/closure configuration conditions above

Historical fitment · 026

026: intake-air preheating kit cover

The preheating kit for the new air-filter system contains the modified inner cover.

  • Intake air preheating kit 1121 007 1044 is for 026 machines with the new air-filter system, as introduced in TI31/1995. Its carburetor box cover 1121 140 1907 carries modified cover 1121 141 2505.
  • This is an intake-air preheating kit, not the electric carburetor-heater package. The statement does not grant fitment to every early 026 or to 024.
  • TI31/1995 is retained locally and remains separately queued for its full kit installation and other new-system changes. This supplemental cover assertion neither invents that procedure nor counts the dependency as missing.

Source: TI 12/1996, p. 6 — Section3 and cover illustration133TI022 KN.

Part numbers (3)
  • 1121 007 1044 — Intake air preheating kitHistorical kit · 026 with new air-filter system
  • 1121 140 1907 — Carburetor box coverKit component · Contains modified cover
  • 1121 141 2505 — Modified coverNested kit component · Carburetor box cover1121 140 1907

Historical fitment · 026

026: plastic nameplate requires revised shroud

The clip-in plastic plate cannot replace the riveted aluminium plate on the original shroud.

  • The riveted aluminium nameplate changes to a clip-in plastic plate retained by two lugs. Revised shrouds have two countersunk mounting holes. Plastic nameplates cannot be fitted in the original shroud because those holes are not countersunk.
  • Aluminium nameplates and two round head rivets 0000 974 1000, size3x6, remain available for older machines in this dated source. Rivets are deleted for the new clip-in arrangement; that is not a blanket spare-part deletion.
  • Introduction is in progress with no numeric production boundary. No shroud ordering number, countersinking modification procedure, current-stock promise or cross-model plate interchange is established.

Source: TI 12/1996, p. 6 — Section4 full service note, summary and remark.

Part numbers (3)
  • 1121 967 1506 — Aluminium nameplate 026Retained replacement · Original shroud
  • 1121 967 1512 — Plastic nameplate 026New clip-in version · Revised countersunk shroud only
  • 0000 974 1000 — Round head rivet3x6, twoRetained for original plate · Older machines

Conditional replacement · 026 / MS 260

026 / MS 260: revised shroud and carburetor-cover contours

New shroud, matching cover, cap and slotted-nut insulator have distinct supply rules.

  • The 026 is renamed MS 260. TI25/2000 explains the naming convention; renaming does not by itself establish interchangeability. The new round badge is on the fan housing, not the shroud.
  • Shroud 1121 080 1605 replaces 1121 080 1609 and includes cap 1121 084 7101 in place of 1122 084 7100 for machines without a decompression valve. The new shroud deletes the rectangular nameplate recess and adds a molded ignition-lead guide; the wiring/cylinder changes are documented separately, not an instruction to fit the shroud alone.
  • The slotted-nut insulator changes from 1121 084 6900 to 1121 084 6901 to suit the contour; the old insulator is supplied only while factory stocks last. New carburetor box cover 1121 140 1915 replaces 1121 140 1904 and matches the new shroud contour. Old shroud, cap and carburetor cover remain available for older machines.
  • Shared IPL sheets do not extend these changes to unnamed variants. Introduction is in progress; the TI gives no numerical serial cutoff. Availability is the historical 2001 factory statement, not current stock. Later catalog numbers do not replace the historical evidence or prove unrestricted interchangeability.

Source: TI 43/2001, p. 1 · TI 43/2001, p. 2 · TI 43/2001, p. 7 · TI 43/2001, p. 8 — Sections1–2.2, shroud/cover drawings and summary rows1–4/remarks1–2.

Part numbers (8)
  • 1121 080 1609 — ShroudPrevious; retained · Only the named model/configuration; see conditions
  • 1121 080 1605 — Shroud including capNew · Only the named model/configuration; see conditions
  • 1122 084 7100 — Non-decompression capPrevious; retained · Only the named model/configuration; see conditions
  • 1121 084 7101 — Non-decompression capNew · Only the named model/configuration; see conditions
  • 1121 084 6900 — Slotted-nut insulatorPrevious; stocks only · Only the named model/configuration; see conditions
  • 1121 084 6901 — Slotted-nut insulatorNew · Only the named model/configuration; see conditions
  • 1121 140 1904 — Carburetor box coverPrevious; retained · Only the named model/configuration; see conditions
  • 1121 140 1915 — Carburetor box coverNew · Only the named model/configuration; see conditions

Service note · 026 / 026 PRO

026: L-only pictogram versus unmarked replacement carburetor cover

Replacement covers have no pictogram; existing order numbers remain unchanged.

2 36 988 352 — Introduction from this machine number for TI39/1997 modifications; no inferred model-wide interchange range.

  • Section 3 changes the pictogram so it refers ONLY TO THE LOW-SPEED SCREW L. REPLACEMENT CARBURETOR BOX COVERS ARE SUPPLIED WITHOUT PICTOGRAM, and PART NUMBERS REMAIN UNCHANGED. Production marking and spare-cover supply are distinct statements.
  • No cover order number, new decal, pictogram artwork, factory-stock restriction or old-cover availability remark is supplied. Do not borrow later IPL cover numbers or the different 023 C/025 cover rules from TI28/1997. The exact 026 cover sheet locates the subsystem only.
  • The missing H pictogram reflects the fixed-jet configuration, not an instruction to alter an older H-adjustable carburetor or change covers on 024/MS 260. No unprinted cover interchange or modification procedure is inferred.
  • Modification is introduced FROM machine number 2 36 988 352, printed identically in section 1 and the summary. This is the historical TI39/1997 configuration, not current stock, a universal retrofit or verified physical interchange. No hardware operation was performed.

Source: TI 39/1997, p. 1 · TI 39/1997, p. 2 — Section3 complete cover/pictogram paragraph and summary introduction serial.

No additional parts-table entry added.

Wrong number or missing part for the 026? Report a correction →