← 024 · 026 · MS 260 · MS 240

Stihl 1121 · Section L · 11 of 17 · 30 parts

Air filter, Throttle control

Fits MS 260, MS 260 C.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
111011121314151616171718181919222020212223242627282933031456666789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (30)

PosPart numberDescriptionQty
1 1121 120 1617 NLA Air filter Fitment / change note → 1
2 1121 120 1618 Air filter, fleece Fitment / change note → 1
3 1124 141 8300 Slotted nut 2
4 1121 124 3000 Torsion spring 1
5 1121 120 2900 Choke shutter Fitment / change note → 1
6 9645 945 7485 O-ring 7x2.5 1
7 1121 120 0602 Carburetor WTE-1A 1
8 1121 120 0621 Carburetor WTE-11 1
9 1121 120 0619 Carburetor WTE-4A 1
10 1121 120 0614 Carburetor WTE-2A 1
11 1121 120 0611 Carburetor WT-426 1
12 1121 120 0610 Carburetor WT-403B 1
13 1121 120 0612 Carburetor WT-427 1
14 1121 120 0616 Carburetor WT-590 1
15 1121 120 0615 Carburetor WT-581 1
16 1128 434 5101 Heating element 1
17 1118 431 6600 NLA Terminal pin no longer available from factory 1
18 1125 121 9900 Heater plate 1
19 1121 123 7503 Grommet 1
20 1121 123 7501 Grommet 1
21 1121 123 7502 Grommet 1
22 1121 123 7504 Grommet 1
23 1121 122 7000 Grommet 1
24 9210 260 0700 Hexagon nut M5 2
26 1117 182 4500 Torsion spring 1
27 1118 182 1006 Throttle trigger 1
28 1121 182 1501 Throttle rod 1
29 1125 442 1601 Contact spring 1
30 1117 182 0805 Lockout lever 1
31 1125 182 0901 Switch shaft 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Conditional replacement · 026 / MS 260

026 / MS 260: two-part choke assembly, unchanged filter numbers

The new freely pivoting shutter is an assembly; its shaft and shutter are not separate spares.

  • Choke assembly 1121 120 2900 replaces 1121 121 2905. It consists of shaft and freely pivoting shutter, allowing closer seating against the carburetor opening in the choke/starting position. The shaft and shutter are not available separately; do not invent separate item36/37 numbers.
  • Mesh-screen filter 1121 120 1617 and fleece filter 1121 120 1618 keep their part numbers and each include the choke assembly. Unmodified filter versions are supplied until factory stocks are exhausted; old choke assemblies are likewise stocks-only. An unchanged filter number alone cannot identify which choke construction is present.
  • Section9 records separate MS 260 parts lists in the 03.2001 microfiche/CD-ROM issues. This is an edition-availability statement, not proof that the current 01-2012 navigation sheets reproduce that historical edition. All other parts are stated unchanged.
  • Shared IPL sheets do not extend these changes to unnamed variants. Introduction is in progress; the TI gives no numerical serial cutoff. Availability is the historical 2001 factory statement, not current stock. Later catalog numbers do not replace the historical evidence or prove unrestricted interchangeability.

Source: TI 43/2001, p. 6 · TI 43/2001, p. 8 — Sections8–9, exploded air-filter drawing and summary rows33–37/remarks2–4.

Part numbers (4)
  • 1121 121 2905 — Choke shutter assemblyPrevious; stocks only · Only the named model/configuration; see conditions
  • 1121 120 2900 — Two-part choke assemblyNew · Only the named model/configuration; see conditions
  • 1121 120 1617 — Mesh-screen air filterUnchanged number; revised contents · Only the named model/configuration; see conditions
  • 1121 120 1618 — Fleece air filterUnchanged number; revised contents · Only the named model/configuration; see conditions

Wrong number or missing part for the MS 260, MS 260 C? Report a correction →