← 024 · 026 · MS 260 · MS 240

Stihl 1121 · Section Q · 16 of 17 · 17 parts

Shroud, Carburetor box cover

Fits MS 260, MS 260 C.

Parts diagrams →

Historical fitment & changes (2) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
110111213141414151623456789
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (17)

PosPart numberDescriptionQty
1 1121 080 1605 Shroud Fitment / change note → → replaced by 1121 080 1650 TI 12/2007 1
2 1121 080 1650 Shroud 1
3 1119 084 8300 Reflector foil 1
4 1121 084 7101 Cap Fitment / change note → 1
5 1121 084 7000 Slotted nut 1
6 1121 084 6901 Insulator Fitment / change note → 1
7 1121 140 1915 Carburetor box cover Fitment / change note → 1
8 1121 141 2900 Cover 1
9 1130 141 2300 Twist lock 1
10 1121 140 1916 NLA Carburetor box cover Fitment / change note → option 1
11 1121 141 2502 NLA Cover Fitment / change note → option 1
12 9438 929 4040 NLA Blind rivet 5x8 option 4
13 1121 084 8202 NLA Cover plate Fitment / change note → option 1
14 9099 021 2360 Self-tapping screw 3.5x9.5 option 4
15 1121 084 1700 Air guide option 1
16 0000 967 3605 Warning pictogram Filler cap 1
Not numbered on the diagram — assemblies, kits and options
— 1121 007 1014 NLA Intake air preheating kit Fitment / change note → option 1

Parts are not interchangeable across engine series — check yours before ordering. NLA = withdrawn by STIHL before 2012.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Conditional replacement · 026 / MS 260

026 / MS 260: revised shroud and carburetor-cover contours

New shroud, matching cover, cap and slotted-nut insulator have distinct supply rules.

  • The 026 is renamed MS 260. TI25/2000 explains the naming convention; renaming does not by itself establish interchangeability. The new round badge is on the fan housing, not the shroud.
  • Shroud 1121 080 1605 replaces 1121 080 1609 and includes cap 1121 084 7101 in place of 1122 084 7100 for machines without a decompression valve. The new shroud deletes the rectangular nameplate recess and adds a molded ignition-lead guide; the wiring/cylinder changes are documented separately, not an instruction to fit the shroud alone.
  • The slotted-nut insulator changes from 1121 084 6900 to 1121 084 6901 to suit the contour; the old insulator is supplied only while factory stocks last. New carburetor box cover 1121 140 1915 replaces 1121 140 1904 and matches the new shroud contour. Old shroud, cap and carburetor cover remain available for older machines.
  • Shared IPL sheets do not extend these changes to unnamed variants. Introduction is in progress; the TI gives no numerical serial cutoff. Availability is the historical 2001 factory statement, not current stock. Later catalog numbers do not replace the historical evidence or prove unrestricted interchangeability.

Source: TI 43/2001, p. 1 · TI 43/2001, p. 2 · TI 43/2001, p. 7 · TI 43/2001, p. 8 — Sections1–2.2, shroud/cover drawings and summary rows1–4/remarks1–2.

Part numbers (8)
  • 1121 080 1609 — ShroudPrevious; retained · Only the named model/configuration; see conditions
  • 1121 080 1605 — Shroud including capNew · Only the named model/configuration; see conditions
  • 1122 084 7100 — Non-decompression capPrevious; retained · Only the named model/configuration; see conditions
  • 1121 084 7101 — Non-decompression capNew · Only the named model/configuration; see conditions
  • 1121 084 6900 — Slotted-nut insulatorPrevious; stocks only · Only the named model/configuration; see conditions
  • 1121 084 6901 — Slotted-nut insulatorNew · Only the named model/configuration; see conditions
  • 1121 140 1904 — Carburetor box coverPrevious; retained · Only the named model/configuration; see conditions
  • 1121 140 1915 — Carburetor box coverNew · Only the named model/configuration; see conditions

Conditional replacement · MS 260

MS 260: intake-air preheating kit for revised covers

The redesigned kit follows the round-nameplate housing and changed cover contours.

  • Intake-air preheating kit 1121 007 1014 is the new special accessory for MS 260 and accounts for the revised fan housing, shroud and carburetor-cover design. The summary lists previous kit 1121 007 1044; the old kit and its listed components remain available for older machines. This does not establish the new kit as an unrestricted 026 retrofit.
  • The new kit includes carburetor box cover 1121 140 1916 (previous 1121 140 1907), itself including cover 1121 141 2502 (previous 1121 141 2505), and cover plate 1121 084 8202 (previous 1121 084 8201). Do not confuse these accessory covers with the ordinary cover 1121 140 1915.
  • Shared IPL sheets do not extend these changes to unnamed variants. Introduction is in progress; the TI gives no numerical serial cutoff. Availability is the historical 2001 factory statement, not current stock. Later catalog numbers do not replace the historical evidence or prove unrestricted interchangeability.

Source: TI 43/2001, p. 5 · TI 43/2001, p. 7 · TI 43/2001, p. 8 — Section6 accessory drawing and summary rows18–21/remark1.

Part numbers (8)
  • 1121 007 1044 — Intake-air preheating kitPrevious; retained · Only the named model/configuration; see conditions
  • 1121 007 1014 — Intake-air preheating kitNew MS260 accessory · Only the named model/configuration; see conditions
  • 1121 140 1907 — Accessory carburetor box coverPrevious; retained · Only the named model/configuration; see conditions
  • 1121 140 1916 — Accessory carburetor box coverNew · Only the named model/configuration; see conditions
  • 1121 141 2505 — Accessory coverPrevious; retained · Only the named model/configuration; see conditions
  • 1121 141 2502 — Accessory coverNew · Only the named model/configuration; see conditions
  • 1121 084 8201 — Cover platePrevious; retained · Only the named model/configuration; see conditions
  • 1121 084 8202 — Cover plateNew · Only the named model/configuration; see conditions

Wrong number or missing part for the MS 260, MS 260 C? Report a correction →