← 084 · 088 · MS 780/880/881

Stihl 1124 · Section A · 1 of 15 · 30 parts

Crankcase

Fits MS 880.

Parts diagrams →

Historical fitment & changes (1) — includes parts and conditions not shown on this drawing.

Position —

Go to table row → Where else is this used →
11011121314151617181819192202122232425262728334567889
Tap a numbered callout to view that part. Use +/− or pinch to zoom. Scroll to browse.

Parts (30)

PosPart numberDescriptionQty
1 1124 020 2601 Crankcase 1
2 0000 988 5215 Connector 1
3 0000 988 8600 Sleeve 2
4 9503 003 6676 Grooved ball bearing 6203 1
5 9640 003 1855 Oil seal 17x32.9x5 1
6 1124 020 2903 Crankcase 1
7 1120 162 5200 Pin 1
8 1121 162 5205 Pin 1
9 1121 162 5200 Pin 2
10 0000 974 1200 Notched pin 2.6x8 1
11 1124 640 9100 Valve 1
12 9465 620 2720 Snap ring 47 1
13 9640 003 2250 Oil seal B20x39x4 1
14 9523 003 4386 Grooved ball bearing 20x47x15 1
15 1124 664 2406 Collar screw 2
16 0000 350 0525 Filler cap 1
17 9645 948 7734 O-ring 25x3.5 1
18 1124 020 2116 Crankcase 1
19 9371 470 2610 Cylindrical pin 5x18 2
20 9022 341 1050 Spline screw IS-M5x25 8
21 1124 029 0510 Gasket → replaced by 1124 029 0501 TI 9/2009 1
22 9022 341 0900 Spline screw IS-M5x28 8
23 1124 030 0404 Crankshaft 1
24 1120 036 8500 Woodruff key 2x3.7 1
25 1124 029 0501 Gasket 1
26 1124 647 9400 Hose 1
27 1117 640 3800 Pickup body 1
28 1125 791 2810 Stop buffer 1
Not numbered on the diagram — assemblies, kits and options
— 1124 007 1052 Set of gaskets 1
— 1124 007 1051 Set of gaskets 088 1

Parts are not interchangeable across engine series — check yours before ordering.

Historical fitment & changes

Source-reviewed service notes supplement this IPL. These are not extra drawing positions or a complete revision history. Availability statements belong to the bulletin’s date.

Service note · MS 361 / MS 362 / MS 440 / MS 441 / MS 460 / MS 650 / MS 660 / MS 880

MS 361, MS 362, MS 440, MS 441, MS 460, MS 650, MS 660, MS 880: magnesium stud adhesive changes to Loctite 270

Metric-thread crankcase studs: Loctite 243 (USA 242) → Loctite 270; not polymer housings.

  • Exact listed magnesium-crankcase models: MS 361, MS 362, MS 440, MS 441, MS 460, MS 650, MS 660, MS 880. Their metric-thread studs change from Loctite 243 (USA: Loctite 242) to Loctite 270. No stud part number, serial changeover, cure time or torque is specified here.
  • Before stud reassembly, clean BOTH threads: insert the tap into the internal thread BY HAND, then blow out the threaded hole; brush off the external stud thread. Coat the cleaned stud with Loctite 270. This thread-cleaning instruction is not permission to enlarge the polymer repair-stud hole.
  • Loctite is NOT used for studs in polymer engine housings. The magnesium adhesive change does not override the separate polymer repair restrictions or give these models permission to use the oversized polymer repair studs.
  • The repeated words engine housings at the end of page3 are present in the original scan; they add no second instruction and are not silently corrected in the retained source.
  • Historical English TI29/2011. Only the printed model and material scope is admitted; no unlisted variants or predecessor models are inferred. No physical interchange test was performed.

Source: TI 29/2011, p. 3 — MS 361, MS 362, MS 440, MS 441, MS 460, MS 650, MS 660, MS 880: magnesium stud adhesive changes to Loctite 270.

No additional parts-table entry added.

Wrong number or missing part for the MS 880? Report a correction →